What size tires can be installed on 9.5j rims?

How to Deal with Small Dots After Car Painting?

While driving, the car body is easily scratched by flying stones or roadside branches, causing damage to the paint surface. In such cases, it is necessary to visit an auto beauty station for repair. During the touch-up painting process, due to uneven spraying and dust on the car body, some tiny particles may appear around the painted area, which can affect the overall appearance of the car. If small particles appear after the car is repainted, it still has a certain impact on the vehicle's appearance. After touch-up painting and polishing, the paint layer becomes thinner, so it is essential to have the staff apply another coat of paint. If the small particles are caused by dust settling after the painting is completed, these particles can be removed through polishing, and the finish will match the original gloss. However, if the particles are due to inadequate paint filtration during the painting process, polishing alone will not be sufficient to remove them. In such cases, the staff must re-sand and repaint the affected area.

14

2

Share

How to Solve Loud Noise from Car Compressor?

Solutions: First, check whether the air conditioning belt is loose, whether there is oil on the belt, and whether the belt is worn. If there is a problem with the electromagnetic clutch, only the electromagnetic clutch needs to be replaced, not the entire clutch assembly. If the problem persists, contact a maintenance technician for timely inspection to prevent further damage. Causes of abnormal noise from car air conditioning compressor: Electromagnetic clutch: Since the electromagnetic clutch is installed close to the ground, years of driving may cause the electromagnetic clutch to be contaminated with sewage or mud, leading to internal bearing damage and resulting in abnormal noise. Loose drive belt: A loose drive belt of the compressor is also one of the causes of abnormal noise. The car air conditioning compressor has high requirements for the electromagnetic clutch during operation, and a loose drive belt will increase the load on the electromagnetic clutch, which can easily cause damage to the electromagnetic clutch. In severe cases, it may even burn out the compressor. Insufficient power generation: Repeated engagement of the electromagnetic clutch causes insufficient power generation from the generator, resulting in insufficient working voltage for the compressor and thus abnormal noise.

20

3

Share

What is the button on the automatic gear lever for?

The button on the automatic gear lever is called the gear lock or shift lock button. The function and precautions of this button are as follows: Function of the button: Without pressing this button, you cannot freely shift gears, which prevents accidental gear changes. It serves two purposes: first, it prevents the driver from accidentally shifting into the wrong gear, which could cause the vehicle to move forward or backward unexpectedly and lead to an accident; second, it protects the transmission by preventing gear damage and extending the transmission's lifespan. Precautions: Driving an automatic transmission vehicle using only the Park (P), Reverse (R), Neutral (N), and Drive (D) gears is sufficient for general driving needs. However, in certain special driving conditions, other functional gears may be required. Therefore, if the correct control method is chosen, an automatic transmission vehicle can perform better than a manual one. Since the automatic transmission contains a hydraulic transmission mechanism and the fluid flow has a certain inertia that cannot change abruptly, it is best to shift into Reverse (R) only after the vehicle has come to a complete stop. It is strictly prohibited to shift the gear lever into Park (P) before the vehicle has fully stopped. After parking, the engine must be turned off and the gear shifted into Park (P) before the key can be removed. Many people have the habit of stopping the vehicle, shifting directly into Park (P), turning off the engine, and then applying the handbrake.

18

3

Share

How many subjects need to be retaken to upgrade from C2 to B2?

Upgrading from C2 to B2 requires retaking the exams. The B2 driver's license test consists of four subjects, with Subject 1 and Subject 4 being theoretical exams. B2 driver's license test content: Subject 1: Theoretical exam covering traffic regulations and other related content. Subject 2: Field skills test, which includes 16 items: reverse parking in a garage, parallel parking, stopping and starting on a slope, single-plank bridge, curve driving, right-angle turns, driving over bumps, passing through a narrow gate, driving on undulating roads, U-turns on narrow roads, simulating continuous sharp turns on mountain roads, simulating rainy and foggy weather conditions, simulating slippery roads, simulating tunnel driving, simulating highway driving, and simulating emergency handling. Subject 3: Road test, where various tasks are completed on actual roads. Subject 4: Exam on civilized driving and related content.

1

Share

How to Identify China 6a or China 6b?

China 6b has not been officially implemented yet. Currently, vehicles on the market that comply with the China 6 standard generally meet the China 6a specifications. 1. The China 6a standard specifies the following: The carbon monoxide emissions per kilometer driven by a gasoline vehicle must not exceed 700 milligrams. The non-methane hydrocarbon emissions per kilometer driven by a gasoline vehicle must not exceed 68 milligrams. The nitrogen oxide emissions per kilometer driven by a gasoline vehicle must not exceed 60 milligrams. The PM (particulate matter) emissions per kilometer driven by a gasoline vehicle must not exceed 4.5 milligrams. 2. The China 6b standard specifies the following: The carbon monoxide emissions per kilometer driven by a gasoline vehicle must not exceed 500 milligrams. The non-methane hydrocarbon emissions per kilometer driven by a gasoline vehicle must not exceed 35 milligrams. The nitrogen oxide emissions per kilometer driven by a gasoline vehicle must not exceed 35 milligrams. The PM (particulate matter) emissions per kilometer driven by a gasoline vehicle must not exceed 3 milligrams.

9

4

Share

What kind of wax is suitable for a new car?

New car protective wax, new car protective wax is a car wax specially designed for new cars. It is also the most important wax when choosing car wax for a new car. New car wax contains a large amount of polymer substances, which can give the car paint a certain dust-proof and drainage function, thereby providing a certain protective effect on the car paint. You can buy it online yourself. New cars should be waxed to protect the gloss and color of the car body; In addition, it is best not to wax the car within 5 months after purchase. The new car itself already has a layer of protective wax. Waxing too early will remove the original wax on the surface of the new car, causing unnecessary waste.

12

1

Share

What size tires can be installed on 9.5j rims?

How to Deal with Small Dots After Car Painting?

How to Solve Loud Noise from Car Compressor?

What is the button on the automatic gear lever for?

How many subjects need to be retaken to upgrade from C2 to B2?

How to Identify China 6a or China 6b?

What kind of wax is suitable for a new car?

What Causes the Chevrolet Cruze to Feel Sluggish and Lack Power When Accelerating?

Is the Honda CM300 domestically produced or imported?

What does car group buying mean?

Does the Ford Mustang Have a Four-Wheel Drive Version?