What size of three-wheeled motorcycles can be driven with a D license?

What is the fault when the SVS light is on?

SVS light on indicates an engine fault. When the engine detects a fault, the SVS light illuminates to alert the driver of an engine issue. Encountering the SVS light while driving may be due to improper driving. Below are related explanations: 1. Light on while driving: If the SVS light comes on during driving, it signifies an abnormality in the vehicle's powertrain system, which may result in loss of power and inability to move. It could also be caused by improper exhaust emission, where excessive emissions trigger the SVS light to flash as a warning. 2. Light on during ignition: If the SVS light turns red or yellow during ignition, it might be due to the use of ethanol-blended fuel. 3. Engine maintenance: Daily use inevitably causes wear and tear on the engine, making regular maintenance essential. There are various reasons for engine damage, so it is advisable to visit a 4S shop for a systematic inspection to determine the cause of the SVS light illumination and the underlying engine fault.

15

4

Share

What is the maximum speed of a 92V tire?

This type of tire can withstand a maximum speed of 240 kilometers per hour, where 92 is the load index and V is the speed rating. Below is some information about tires: 1. Many family cars or SUVs have tires marked with 91V on the side. Here, 91 is the load index, indicating that each tire can bear a weight of 615 kilograms, and V is the speed rating, meaning the tire can withstand a maximum speed of 240 kilometers per hour. 2. When purchasing tires, it is essential to check the load index and speed rating on the original tires, as these are crucial for safety. Tires are the only part of the car that comes into contact with the ground, and they play a vital role in driving stability and safety. 3. The sidewall of a tire contains a lot of important information, such as the load index, speed rating, production date, recommended tire pressure, size specifications, etc.

12

5

Share

Does the ETC device need to be charged?

There are two types of ETC devices: one is solar-powered, which does not require charging as it uses its own built-in power source. The ETC electronic tag consumes power but generally does not need to be charged during normal use because it has a solar panel on the back that can recharge itself. During installation, it should be placed away from the black areas on the windshield. The other type requires charging, and if it is not used frequently, it is recommended to charge it every two to three months. ETC stands for Electronic Toll Collection. To apply for an ETC, you need to provide the original and photocopies of the vehicle owner's valid ID and vehicle registration certificate. If the application is not made by the owner, the agent must also bring their valid ID. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. Additionally, you will need a bank card for deducting highway tolls, and the applicant must be between 18 and 60 years old, with the vehicle registered under their name. For company vehicles, the required documents include: An introduction letter from the vehicle owner (with company seal); a photocopy of the organization code certificate or business license (with company seal); the agent's original ID; the original vehicle registration certificate; and the vehicle for which the ETC is to be installed. Benefits of installing ETC: Time-saving: Avoids the hassle of waiting in line. Green and eco-friendly: Reduces noise and exhaust emissions by allowing vehicles to pass through toll stations without stopping. Cost-saving: Reduces wear and tear and fuel consumption by minimizing vehicle starts and stops. Users can also enjoy toll discounts. Improved efficiency: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC systems faster, more advanced, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. Here are some installation considerations for ETC: Do not obstruct the driver's view; it is best to install it behind the rearview mirror. Many car models have windshields with steep angles, which can reduce the driver's field of vision. Installing the ETC without considering this can increase blind spots. Placing it on the right side behind the rearview mirror helps avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not need to be charged or have its battery replaced, as it has a solar panel on the back for self-charging. Therefore, during installation, avoid the black areas on the windshield and any positions that might block the solar panel. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-tamper lever connected to a switch. After installation, the windshield presses the lever in. If removed, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You would then need to visit an ETC service point to unlock it. This feature prevents multiple vehicles from sharing a single device. Things to note when using ETC:

7

4

Share

What brand of car is the Jim?

Jim refers to the Marui model of car. Here is more information about the Marui car: 1. The Marui is a pickup truck model. In terms of exterior design, the vehicle's lines are very consistent with the typical pickup truck styling. The front emblem has been changed from the original triangle to the Jim logo. The overall design is quite bold, with a more squared-off rear styling. 2. For the interior, the Marui retains the current model's design but adds piano black trim on the dashboard area, giving the cabin a more youthful appearance. 3. The Marui shares the same platform as the D-MAX. In terms of powertrain, this model offers two engine options: a gasoline engine and a diesel engine. The gasoline engine has a 2.0T displacement, while the diesel engine comes in 2.5T. The 2.5T diesel engine delivers maximum power of 129 horsepower and maximum torque of 320 N·m, paired with either 5MT or 6MT transmissions.

14

1

Share

Is the Brake on the Left or Right?

Whether it's a manual or automatic transmission vehicle, the brake is always on the left, and the accelerator is on the right. Many people confuse the brake and accelerator pedals. In manual transmission vehicles, this confusion can still occur, but in automatic transmission vehicles, there is no clutch—only the brake and accelerator, both controlled by the right foot. As long as you don't use both feet simultaneously, the likelihood of confusion is actually lower. Tips for distinguishing between the brake and accelerator: 1. Left brake, right accelerator: Drivers should always remember that the brake is on the left and the accelerator is on the right, forming a natural and firm concept in their minds. 2. Heel positioned under the brake: Drivers should develop the habit of placing their heel directly below the brake pedal, allowing them to brake immediately in emergencies. 3. Press the accelerator diagonally, press the brake straight: Since the heel is positioned directly below the brake pedal, pressing the brake involves a straight downward motion, while the accelerator is to the right of the brake, requiring the toes to move diagonally to the right to press it. 4. Rest your foot on the brake when idle: When not accelerating, keep your foot on the brake pedal to be ready for braking. If your foot is near the accelerator, you might accidentally press it in a panic, whereas keeping it on the brake ensures better preparedness for sudden situations.

20

1

Share

What does oil A3B4 mean?

A3B4 is one of the certification standards of the European Union. 'A' represents gasoline engines for passenger cars, 'B' represents diesel engines for passenger cars, and the numbers represent the oil grade. A3B4 is a relatively high-grade mainline lubricant, which is a catalytic type of gasoline and light-duty diesel engine oil. The differences between A3B4 and SN are as follows: 1. Different certifying associations: Essentially, they are grades certified by two different associations—one by the European Automobile Manufacturers' Association (ACEA) and the other by the American Petroleum Institute (API). 2. Different types of oil represented: A3B4 is an oil standard established by the European Automobile Manufacturers' Association (ACEA), representing gasoline engine oils; while SN is an oil certification table by the American Petroleum Institute (API). Although they are two different oil certification standards, there is a certain relationship between ACEA and API. For example, A3B4 is only equivalent to the SL grade of API, so compared to SN, SN is relatively more advanced.

17

2

Share

What size of three-wheeled motorcycles can be driven with a D license?

What is the fault when the SVS light is on?

What is the maximum speed of a 92V tire?

Does the ETC device need to be charged?

What brand of car is the Jim?

Is the Brake on the Left or Right?

What does oil A3B4 mean?

What Causes the Engine to Still Make Noise After the Car is Turned Off?

What does the exclamation mark in a car mean?

What does 'how many oils' mean for a car?

What brand of motorcycle is Kawasaki?