What should you pay attention to when driving on the highway?

2 Answers
McEmma
07/25/25 9:12am
Highway driving precautions include checking for potential hazards before getting in the car; concentrating on driving; avoiding fatigue driving; maintaining safe driving speed; early request, late report; being careful when driving at night; properly handling tire blowouts. Try not to occupy the outermost lane for long periods of time. The following is extended information: Relevant regulations: According to China's Road Traffic Safety Law, road traffic safety work should follow the principles of legal management and convenience for the public, ensuring orderly and safe road traffic. Precautions: It should also be noted that motor vehicles that have reached the scrapping standard are not allowed to drive on the road. Article 21 of the Road Traffic Safety Law states that before driving a motor vehicle on the road, the driver should carefully check the safety technical performance of the motor vehicle.
Was this review help?
2
3
Share
McNatalie
08/11/25 7:12pm
When driving on the highway, I believe safe driving is the top priority. Maintain a reasonable speed—don’t exceed the limit or drive too slowly and obstruct traffic—to reduce accident risks. Keep a sufficient distance from the car ahead, at least a two-second gap, to allow for emergency braking. Stay focused—avoid using your phone or getting distracted—and plan your route with navigation in advance to prevent losing concentration. Fatigue is a major issue; long highway drives can easily cause drowsiness, so it’s advisable to take a 15-minute break every two hours, drink water, or step out to stretch. Vehicle checks are essential—inspect tire pressure and brake lights before departure to avoid mid-journey breakdowns. In changing weather like rain or fog, slow down and turn on your headlights. Ultimately, most highway accidents stem from negligence, so developing good habits ensures a safer trip.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

What to Do When Mercedes-Benz One-Button Start Fails?

The solutions for Mercedes-Benz one-button start failure are: 1. Check if the key is nearby, as the one-button start relies on key sensing; 2. Verify if the gear is not in the P position; 3. Inspect whether the battery has power. Taking the 2021 Mercedes-Benz E300 as an example, it belongs to the mid-to-large-size car category, with body dimensions of: length 5078mm, width 1860mm, height 1484mm, and a wheelbase of 3079mm. The 2021 Mercedes-Benz E300 features multi-link independent suspension both in the front and rear, equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 184PS, maximum power of 135kW, maximum torque of 280Nm, paired with a 9-speed automatic manual transmission.
10
1
Share

Does the third-generation Haval H6 come with a particulate filter?

The third-generation Haval H6 is equipped with a particulate filter. The engine of the third-generation Haval H6 requires a particulate filter to minimize the proportion of pollutants in exhaust emissions, thereby meeting the China-6 emission standards while maintaining power output. A particulate filter is a ceramic filter installed in the diesel engine's emission system, which captures particulate matter before it enters the atmosphere. It can reduce the soot produced by diesel engines by more than 90%, and the captured particulate matter is subsequently burned off during vehicle operation. Working principle of the particulate filter: The diesel particulate filter is coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the engine's exhaust particulate trap through a dedicated pipeline. After passing through its densely arranged bag-type filter, the carbon particles are adsorbed onto the filter made of metal fiber felt. When the adsorption of particles reaches a certain level, the burner at the end automatically ignites, burning off the adsorbed carbon particles and converting them into harmless carbon dioxide. To check whether the third-generation Haval H6 is equipped with a particulate filter, you can use the following three methods: 1. Check the and to see if there is a particulate filter function. Additionally, carefully review the fault codes in the manual to see if there is a "Particulate Filter" warning light indicator. 2. Check the label on the oil cap. If the oil cap clearly states 0W-20 grade oil, it indicates the presence of a particulate filter. 3. Look behind the three-way catalytic converter on the exhaust pipe to see if there is a cylindrical section. If present, that is the particulate filter.
4
0
Share

What are the reasons for slow throttle response?

The reasons for slow throttle response are: 1. Poor fuel quality; 2. Blockage in the intake and exhaust system; 3. Abnormal throttle pedal signal; 4. Fuel injection or ignition failure. The working principle of the throttle is: when the throttle pedal is pressed, it directly controls the throttle valve, which increases the throttle opening, allowing more air to enter the engine. At this point, the ECU commands the fuel injection system to inject more fuel, increasing the engine speed and thus accelerating the vehicle. The solutions for slow throttle response are: 1. Check the fuel pressure and cleanliness, replace the fuel filter; 2. Inspect the ignition system, cylinder wires, and spark plugs; 3. Check the cylinder pressure to see if the engine is misfiring; 4. Inspect the intake and exhaust pipes for blockages; 5. Verify the ignition timing is correct, check the throttle position sensor and idle motor; 6. Use higher quality gasoline.
12
3
Share

How to reset the tire pressure on a BMW?

BMW tire pressure reset method is: 1. Use the iDrive system to access vehicle information and find the vehicle status. On this page, you can see the tire pressure indicator symbol; 2. Select this symbol and click to reset the tire pressure. Taking the 2021 BMW 1 Series as an example, it belongs to the compact car category, with body dimensions of: length 4462mm, width 1803mm, height 1446mm, wheelbase 2670mm, and a fuel tank capacity of 50 liters. The 2021 BMW 1 Series features a front MacPherson strut independent suspension and a rear multi-link independent suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 140PS, maximum power of 103kW, maximum torque of 220Nm, and is paired with a 7-speed dual-clutch transmission.
20
0
Share

What to Do If the Air Vent Flap of the Car Air Conditioner Falls Off?

If the air vent flap of the car air conditioner falls off, it needs to be replaced and reinstalled. Below is relevant information about car air conditioners: 1. By driving method: Independent type (a dedicated engine drives the compressor, offering large cooling capacity and stable operation, but with high cost, large size, and weight, mostly used in large and medium-sized buses) and non-independent type (the air conditioning compressor is driven by the car engine, with cooling performance significantly affected by the engine's operation, leading to poor stability, mostly used in small buses and sedans). 2. By air conditioning performance: Single-function type (separate installation of cooling, heating, and ventilation systems, operated independently without interference, mostly used in large buses and trucks) and integrated heating-cooling type (shared blower and air duct for cooling, heating, and ventilation, controlled on the same panel, which can be divided into combined type where heating and cooling work separately and mixed temperature-control type where both can work simultaneously. Sedans mostly use the mixed temperature-control type). 3. By control method: Manual type (adjusting temperature, wind speed, and direction by toggling function keys on the control panel) and electrically controlled pneumatic adjustment (using a vacuum control mechanism to automatically control temperature and air volume within preset temperatures when the air conditioning function key is selected). 4. By adjustment method: Fully automatic adjustment (using calculation and comparison circuits to control adjustment mechanisms via sensor signals and preset signals, automatically adjusting temperature and air volume) and fully automatic adjustment controlled by microcomputer (using a microcomputer as the control center to achieve comprehensive and multifunctional optimal control and adjustment of the in-car air environment).
20
4
Share

What is the difference between S gear and L gear?

The differences between S gear and L gear are: 1. Different nature: S gear is the sport mode; L gear is the low-speed mode. 2. Different characteristics: In S gear sport mode, the transmission delays upshifting, keeping the engine at high RPM for a longer time, allowing the car to run at low gear and high RPM for an extended period, thereby achieving greater torque output and acceleration; L gear prevents the car from upshifting, continuing to move forward at high RPM and low gear, which is better for towing loads. The functions of S gear in a car are: 1. In this mode, the vehicle's power performance is stronger, commonly used for overtaking, uphill driving, long downhill driving, traffic jams, and clearing carbon deposits; 2. The transmission can shift freely.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.