What Should You Pay Attention to When Braking?

2 Answers
JaydenAnn
09/07/25 5:20am
When braking, you need to pay attention to the following situations: 1. Brake noise. Typically, brake noise occurs when you press the brake pedal while driving, and the braking system emits a sharp metal friction sound. This sound often appears after rain. 2. Sudden braking. Sudden braking not only makes passengers uncomfortable but also increases the risk of collisions. Sudden braking on curves is particularly dangerous, as it can lead to skidding or loss of control. Even worse, some vehicles may experience axle breakage when braking sharply while turning. 3. Brake pedal not returning. The causes of a brake pedal not returning include leakage in the master cylinder or wheel cylinder, or faults in the master and wheel cylinders leading to pedal sinking. Additionally, it could be due to wear, lack of lubrication, or damage to a bearing on one of the axles. If a bearing is damaged, the entire vehicle may exhibit uncoordinated movement.
Was this review help?
9
3
Share
DeChloe
09/19/25 4:37am
I pay special attention to brake safety in daily driving and have summarized some experience after years of driving. Regular inspection of brake pads is crucial—replace them once they become thin, and a screeching noise indicates severe wear. Avoid sudden braking, especially in congested areas, as it can easily cause brake discs to overheat and warp. On rainy or snowy days when roads are slippery, braking distance can more than double, so slow down in advance. Don’t forget about brake fluid—check the fluid level every six months, as low levels may indicate leaks or air entering the system, affecting braking performance. Driving habits also matter—use predictive deceleration instead of sudden stops, such as easing off the accelerator early when approaching traffic lights to utilize engine braking. This reduces wear and extends lifespan while improving driving safety. Personally, I also make sure to maintain proper tire pressure, as tire grip directly affects braking performance. In short, frequent checks and smooth driving prevent small issues from turning into major problems.
Was this review help?
19
1
Share
Expand All
More Forum Discussions

What does it mean to check the 4WD system?

Checking the 4WD system indicates that there is a malfunction in the vehicle's four-wheel drive system, and it is recommended to visit a 4S shop for computer matching detection and repair. Below is more information about the vehicle's four-wheel drive system: 1. Concept: Four-wheel drive means that all four wheels of the car can receive driving force. In this way, the engine's power is distributed to all four wheels, making it less likely for the wheels to slip when encountering poor road conditions, significantly improving the vehicle's off-road capability. 2. Classification: Part-time four-wheel drive (PartTime4WD) and full-time four-wheel drive (FullTime4WD). 3. Function of 4WD: 4WD (four-wheel drive) helps the vehicle overcome slipping on muddy and snowy roads through low-ratio transmission devices, just like driving off-road, on rocky terrain, or over undulating hills.
18
0
Share

What is the actual fuel consumption of the Baojun 560?

The actual fuel consumption of the Baojun 560 is approximately 7L per 100 kilometers. Fuel consumption dimensions: Every vehicle has its own "economic speed," typically designed within the range of 70 to 90 kilometers per hour. If the vehicle can travel smoothly in the city within this speed range, the fuel consumption should be relatively close to the test values obtained in standard laboratory conditions. Actual fuel consumption calculation: Fuel consumption per 100 kilometers = volume of fuel consumed (liters) ÷ distance traveled (kilometers) × 100. Factors affecting fuel consumption: The fuel consumption per 100 kilometers is not fixed. Different road conditions, load capacity, temperature, and whether the air conditioning is on can all affect fuel consumption.
3
3
Share

What are the dimensions of the Kusto trunk?

The dimensions of the Kusto trunk are 26L. Trunk dimensions for this car: Generally, trunk dimensions vary depending on the situation. Hatchbacks: The trunk volume is approximately 150 to 300 liters. Sedans: Typically, it can reach around 350 to 500 liters. Precautions for loading items in the car trunk: Flammable and explosive items must not be placed: Items that are flammable or explosive are strictly prohibited in the trunk, especially during summer when temperatures are high. Storing such items in the trunk poses significant safety hazards. Additionally, it's essential to have a fire extinguisher in the car as a precaution to ensure better driving safety. Valuable items should not be placed: Many car owners have the habit of keeping valuable items in the car, which is very risky. As the year-end approaches, placing valuable items in the trunk makes them susceptible to theft and can also cause damage to the vehicle. Therefore, it's advisable not to store valuable items in the car trunk to avoid any mishaps.
5
5
Share

What lights to turn on when entering a poorly lit road?

Cars need to turn on the high beams in advance when entering poorly lit sections of the road, and drivers should pay attention to safety during the journey. Here is more information about high beams: The difference between high beams and low beams: Both high beams and low beams serve nighttime illumination functions. High beams have a higher angle and longer range, while low beams have a lower angle and shorter range. The dangers of improper use of high beams: Do not use high beams when driving in the city, as urban areas generally have good lighting conditions. The high angle of high beams can easily dazzle oncoming drivers and pedestrians, posing significant risks. The uses of high beams: Alternately flashing high beams at night can serve as a substitute for honking to alert nearby pedestrians and vehicles. High beams can be used when driving on highways or in rural areas without streetlights, but they should be switched to low beams during oncoming traffic.
5
1
Share

What is the displacement equivalent of 370 turbo?

The following is the relevant information about 370 turbo: 1. Introduction to the Avancier 370 turbo: The Avancier 370 turbo is equipped with a 2.0T turbocharged direct-injection engine with the model code K20C3. It delivers a maximum power of 272 horsepower (200 kW) at 6500 rpm and a peak torque of 370 N•m at 2250-4500 rpm, making its power parameters the best in its class. Unlike some small-displacement turbocharged engines that focus on low-end torque and release torque roughly, this engine operates more like a naturally aspirated engine, with smooth and linear torque delivery, making it very comfortable for stop-and-go driving in urban areas. 2. Avancier speed: In the 0-100 km/h acceleration test, the Avancier achieved a time of 7.45 seconds. For reference, the Envision 2.0T's 0-100 km/h acceleration time is 7.77 seconds, and the Toyota Highlander's is 9.61 seconds. Considering the Avancier's hefty 1.9-ton body, the performance of this 2.0T engine is quite impressive.
13
1
Share

What is the difference between left reverse parking and right reverse parking?

The key difference between "left reverse parking" and "right reverse parking" lies in the direction of steering wheel rotation. For right reverse parking, turn the steering wheel fully to the right; for left reverse parking, turn it fully to the left. The reference methods for parking near "left reverse parking" and "right reverse parking" are essentially the same. Below are the relevant details: 1. When to turn the steering wheel right: Control the clutch properly, release it slowly, and let the car start moving forward while maintaining a steady speed. At this time, pay attention to the left rearview mirror. When the lower edge of the mirror aligns with the line, quickly turn the steering wheel fully to the (left) right. 2. When to straighten the steering wheel: After turning the steering wheel fully to the right, continue moving backward without stopping. Now focus on the right rearview mirror. When you see the nearest corner of the parking space's right line appearing in the mirror, maintain a distance of 30CM between the car and the corner. This is a standard to judge whether the parking is accurate. If the 30cm distance is just right, no further adjustments are needed. Slowly reverse the car until the line and the car body are parallel, then straighten the steering wheel and gradually reverse into the bottom of the parking space. 3. When to stop: During the process of reversing into the bottom, pay attention to the left rearview mirror. When the lower edge of the mirror aligns with the front line of the parking space, stop the car to complete the reverse parking. 4. Exiting the parking space: Press the clutch, shift to first gear, and start slowly. At this time, focus on the front hood of the car. When the roadside line is no longer visible, turn the steering wheel to the left, straighten the car body, and then straighten the steering wheel. Stop the car when your left shoulder aligns with the end line.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.