···
Log in / Register

What should you do when the vehicle skids out of control?

4 Answers
Donna
07/29/25 4:52am
Correct operation methods when the vehicle skids out of control: Do not step on the brake when the car is out of control, as this will only cause the car to lose control completely in an instant. Then, different operations should be performed according to different situations, which can be divided into three types: front-wheel skid, rear-wheel skid, and four-wheel skid. The following are detailed operation methods: 1. Front-wheel skid: Do not step on the brake. First, slowly release the throttle, while turning the steering wheel in the direction of the skid (not too much) to allow the front wheels to regain rotation. Immediately turn the steering wheel back and slightly press the throttle. 2. Rear-wheel skid: Do not step on the brake. First, slowly press the throttle, while turning the steering wheel in the direction of the skid (not too much). Once the vehicle regains control and stops skidding, immediately turn the steering wheel back and slightly press the throttle. 3. Four-wheel skid: Do not step on the brake. First, slowly release the throttle, do not move the steering wheel, and wait for the car to stop skidding. Immediately press the throttle to move forward.
Was this review help?
20
4
Share
StStella
08/12/25 5:51pm
Speaking of vehicle skidding and losing control, I've experienced quite a few situations driving in rain and snow. I remember once taking a turn too fast on a slippery national highway when the rear of the car suddenly fishtailed. The key at such moments is to stay calm and not panic. Immediately release the accelerator to let the speed drop—don't rush to slam on the brakes, as that will only cause the wheels to completely lose traction. Gently steer the wheel in the direction of the skid; for example, if the car slides left, turn the wheel slightly left. Gradually, the car will regain control. After such incidents, I always check tire pressure and wear, and perform regular maintenance. Normally, I maintain a steady speed while driving, avoid speeding, especially on poor road surfaces. If not handled properly, skidding and losing control can pose significant risks, ranging from hitting guardrails to rolling over, so staying calm is crucial.
Was this review help?
17
0
Share
Expand All
VonDallas
10/03/25 4:32am
I just started learning to drive, and my instructor taught me how to handle skidding and loss of control. He said not to panic in the car, and the first step is to ease off the accelerator and avoid pressing too hard. If the car is sliding, steer gently in the direction of the skid, avoiding sudden movements. I experienced it once on a rainy road when the wheels skidded. My mind went blank, but I remembered my instructor's advice: release the accelerator and steer gently into the skid. The car gradually came to a stop. Since then, I've been extra careful to check tire conditions, ensuring proper tire pressure. I also drive slower in rain or snow, as skidding and loss of control often result from driving too fast or slippery road conditions. If it happens, stay calm, operate carefully, and afterward, check the braking system—safety always comes first.
Was this review help?
9
1
Share
Expand All
LaConnor
11/16/25 6:10am
From a physical perspective, when a vehicle skids out of control, it occurs as the tires lose traction and begin to slide. In such situations, releasing the throttle is crucial as it helps reduce load transfer to the rear or front wheels. The steering wheel should be smoothly turned in the direction of the skid, avoiding sudden movements. If the vehicle is equipped with an ABS system, gentle braking can be applied. Abrupt steering or hard braking may lead to more severe loss of control. Preventive measures such as regularly checking tire tread patterns and maintaining proper tire pressure can significantly reduce risks. Stay focused while driving and reduce speed on slippery surfaces. After regaining control of the vehicle, stop to inspect its condition and ensure there are no other issues.
Was this review help?
9
2
Share
Expand All
More Forum Discussions

Can You Pass the Driving Test by Crossing the Dotted Line in Subject 3?

Crossing the dotted line in Subject 3 is permissible. According to China's Road Traffic Safety Law, the solid center line on the road must not be crossed or driven over, while the dotted line can be temporarily crossed. Therefore, if a vehicle runs over a solid line during the road test, it will be directly judged as a failure. The contents of the Subject 3 road driving skills test include: For large buses, tractors, city buses, medium-sized buses, large trucks, small cars, small automatic transmission cars, low-speed trucks, and small automatic transmission cars for the disabled, the test includes preparation before getting on the car, simulated nighttime lighting test, starting, driving in a straight line, and shifting gears. Changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing through pedestrian crossings, passing through school zones, passing through bus stops, meeting vehicles, overtaking, making U-turns, and driving at night; the test contents for other types of vehicles are determined by the provincial traffic management departments of the public security authorities.
14
1
Share

How to Deal with the Failure of the Mechatronic Unit in the Magotan Transmission?

If the mechatronic unit in the Magotan transmission fails, the solution is to replace it and then upgrade the control software using a computer. Below are the specific details about the transmission mechatronic unit: 1. Working Principle: The transmission mechatronic unit controls the operation of the automatic transmission through solenoid valves. It processes input circuits, connecting signals from sensors and other devices. These signals are processed, impurities are filtered out, and then amplified. They are then converted into electrical signals to drive the solenoid valves. 2. Functions: Using the mechatronic unit for control allows precise management of the solenoid valves, enabling the transmission to operate more efficiently and accurately. This results in smoother vehicle driving and improved fuel efficiency. The mechatronic unit can connect to the system, fully enabling electronic gear shifting. After removing the transmission oil pan, the mechatronic unit becomes visible. Below the unit, there is an aluminum valve body with cylindrical plungers inside. The valve body is equipped with multiple solenoid valves that perform various detection functions.
17
0
Share

Where is the engine of the Hanteng X5 produced?

Hanteng X5 uses a self-produced engine. The following is an introduction to the Hanteng X5 engine and related information about the Hanteng X5: Introduction to the Hanteng X5 engine: This car is equipped with a 1.5-liter turbocharged engine across all models, paired with either a 5-speed manual transmission or a 6-speed automatic manual transmission. Related information about the Hanteng X5: The Hanteng X5 is a model under the Hanteng brand. The car has a length of 4501 mm, a width of 1820 mm, and a height of 1648 mm, with a wheelbase of 2600 mm. In terms of interior design, the car features a warm dual-tone interior with wood grain trim, a 9-inch central control screen, and the Hanteng Cloud Intelligent Internet Service System, which provides remote diagnostics, remote control, navigation, and other functions. In terms of configuration, the car is equipped with one-button start-stop, EPB electronic parking brake, automatic parking, panoramic sunroof, and more.
19
1
Share

What is BBL car?

BBL stands for "Benz, BMW, Lexus". In recent years, the automotive market has witnessed a surge in popularity for Lexus, with increasing acclaim. Both its growth trajectory and sales figures indicate strong potential to overtake Cadillac as the leader among second-tier luxury brands, and even show signs of entering the first-tier luxury segment. Its high rankings in J.D. Power reliability studies, stellar reputation, and sustained momentum rival that of BBA. More details are as follows: Origin: Many netizens speculate that the BBA landscape may be reshaped, with Lexus potentially replacing Audi in the future to form the first-tier luxury brand trio alongside Mercedes-Benz and BMW, collectively referred to as "BBL". International context: This notion isn't unrealistic, as it has already materialized in the U.S. Based on the top 10 luxury brand sales rankings in the U.S. for 2019, Lexus' sales figures are comparable to those of Mercedes-Benz and BMW, placing them firmly in the first tier, while Audi shows a significant sales gap, relegating it to the second-tier. The BBL grouping closely reflects this reality.
19
2
Share

What are the standards for exceeding height and length in pickup trucks?

The "Implementation Regulations of the Road Traffic Safety Law" Article 54 stipulates: Small vehicles must not exceed the approved load capacity specified on the driving license, and the length and width of the load must not exceed the vehicle compartment; the height from the ground must not exceed 2.5 meters. The cargo must not extend beyond the rear of the vehicle compartment, otherwise it is considered overlength. Below is additional information: 1. Introduction: Pickup trucks are an important part of the automotive market. A pickup (pick-up) is a vehicle model that combines a car's front end and cab with an open cargo compartment. Its characteristics include the comfort of a sedan, strong power, and better cargo capacity and adaptability to rough roads compared to sedans. 2. Features of Pickup Trucks: The functional advantages of pickup trucks lie in their dual characteristics of both family and commercial use (passenger and cargo), with notable features as a utility vehicle for both units and families; diverse structures meet a wider range of needs (two-door or four-door, long or short cargo compartments, two-wheel or four-wheel drive, gasoline or diesel engines). Compared to sedans, they have advantages in load-bearing and off-road capability, while compared to light and mini trucks, they offer better safety and driving comfort.
14
2
Share

Can Sedans Travel on National Highway 318?

Sedans can travel on National Highway 318. The specific details are as follows: 1. Chassis Issue: The overall road conditions of National Highway 318 on the Sichuan-Tibet route are not ideal. Firstly, the roads are steep with numerous high peaks; there are 15 peaks to cross along the way, including continuous curves like those at Zheduo Mountain. Secondly, the road conditions are poor, often encountering flash floods, mudslides, landslides, and falling rocks. Although National Highway 318 on the Sichuan-Tibet route has undergone large-scale road repairs in recent years, many sections are still affected by natural disasters, making it impossible for vehicles with low ground clearance to pass. 2. Tire Issue: Some sections of National Highway 318 on the Sichuan-Tibet route are gravel roads, which are very demanding on tires. Sedan tires are designed for asphalt roads and are relatively thin, unable to withstand the significant damage caused by gravel roads. Additionally, there are few tire repair points along National Highway 318. 3. Vehicle Popularity Issue: The most commonly seen vehicles in Tibet are the Toyota Prado, Mitsubishi Pajero, and Toyota Land Cruiser. Gas stations and repair shops along the route mainly supply fuel and parts for these models.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.