What should you do when encountering an oncoming vehicle occupying your lane while driving?

1 Answers
McKayden
07/29/25 6:53pm
First, reduce your speed, then honk the horn and flash your headlights to alert the other driver to slow down and yield, or return to their own lane. If the other vehicle does not yield or is unable to do so, the driver should then check their rearview mirror to see if changing lanes is possible. If changing lanes is not an option, it is crucial to stop and yield. Remember, never act impulsively.
Was this review help?
8
3
Share
More Forum Discussions

What to Do If You Lose Your ID Card Before Taking the Driver's License Test?

If you lose your ID card before taking the driver's license test, you can apply for a temporary ID card. Here are some relevant introductions about the driver's license test: 1. Test Subjects: The subjects of the driver's license test are unified nationwide. The test is divided into four subjects: theoretical knowledge, field driving skills, road driving skills, and knowledge related to civilized driving. 2. Notes: Before the test, you need to register first and then undergo a physical examination. The test sequence must follow Subject 1, Subject 2, Subject 3, and Subject 4 in order. Only after passing one subject can you proceed to the next. 3. Test Content: Subject 1 mainly tests knowledge of road traffic safety laws, regulations, and related information. Subject 2 mainly tests field driving skills, including reversing into a parking space, stopping and starting on a slope, turning at a right angle, driving on a curve, and parallel parking. Subject 3 mainly tests road driving skills, which is the most important test subject. Subject 4 mainly tests knowledge related to safe and civilized driving.
15
2
Share

What are the reasons for difficult cold starts?

Reasons for difficult cold starts: 1. When there is excessive carbon buildup in the engine, the gasoline sprayed by the cold start injector is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts, making it difficult to start; 2. The engine temperature is insufficient, and both the fuel and lubricating oil temperatures are too low. Poor fuel atomization at low temperatures leads to reduced ignition energy, thereby affecting performance and causing the car to shake. Precautions for difficult cold starts: 1. Pay attention to defogging: In winter, the significant temperature difference between the inside and outside of the car can cause fogging on the windows, which can be troublesome for driving; 2. Prevent icing: Frost and ice on the windows are extremely common in cold winters, mainly due to the large temperature difference between the inside and outside of the car.
11
5
Share

Why is the clutch of a minivan particularly heavy?

The reasons for a heavy clutch are as follows: 1. The mechanical part of the clutch operating mechanism has a sticking phenomenon. 2. The clutch master cylinder lacks hydraulic oil or has a leakage issue. 3. The clutch slave cylinder is corroded. 4. The air passage of the clutch booster cylinder is blocked or the cylinder is leaking air. 5. The clutch release fork is broken or bent. 6. The release bearing or bearing seat has fallen off. Below are the troubleshooting methods: 1. Check if the mechanical operating mechanism is normal: Inspect whether the clutch mechanical operating mechanism has sticking or interference issues. 2. Check for hydraulic oil leakage: Verify if the brake hydraulic oil is sufficient and if there are any leakage points. If the oil level is low, refill the hydraulic oil and test drive to see if the issue is resolved, while also checking all connection points for oil leaks. 3. Check if the booster pump is leaking air: Inspect the clutch booster pump for air leaks. If air leaks are found during a test drive, it may indicate that the internal rubber sealing ring of the booster pump has worn out over time, causing air leakage. Replace the component and test drive to confirm normal operation.
16
4
Share

What car is represented by the character 'Song'?

A car represented by the character 'Song' is the BYD Song. The BYD Song is the dual-mode version of the BYD S3, positioned as a new energy compact SUV. In terms of appearance, it features an X-shaped front grille, giving it a sporty look. The side profile of the car uses hidden A, B, and C pillars to create a floating roof visual effect. The BYD Song is empowered by BYD's BNA architecture and is jointly developed by international designer Wolfgang Egger, former Mercedes-Benz chassis expert Heinz Keck, and NVH specialist Cha Hee-bum. The Song is positioned as a cross-level aesthetic and intelligent connected SUV, covering three power options: fuel, dual-mode, and pure electric, with three models available. The all-new Song redefines the standards for compact SUVs.
3
4
Share

Are Car Coolant and Antifreeze the Same Thing?

Car coolant and antifreeze are not the same thing. Here is a related introduction about coolant and antifreeze: 1. Definitions: (1) Coolant: The full name is antifreeze coolant, which means it has antifreeze functionality. As the name suggests, it serves two purposes: first, antifreeze, and second, cooling. Many people think coolant is only needed in winter, but this is incorrect. Coolant is not just for winter use; it is required all year round. Whether in extreme heat or cold, cars cannot do without coolant. Proper use of coolant not only protects the engine's cooling system and improves heat dissipation but also enhances engine efficiency and extends its lifespan. (2) Antifreeze: Antifreeze prevents the coolant from freezing in cold winter conditions, which could otherwise crack the radiator or damage the engine cylinder block or head. Many believe antifreeze is only for winter use, but in fact, it is needed throughout the year. 2. Differences: Antifreeze is not entirely equivalent to coolant. Coolant is equal to water plus antifreeze. In simpler terms, coolant refers to any liquid that can cool the engine, which can be either water or antifreeze. Water is a very basic form of coolant and is also limited by seasonal constraints.
3
1
Share

What Octane Gas Does Geely Use?

Geely vehicles should use 92 octane gasoline as specified by the manufacturer. Below is an introduction to the functions of engine oil: Lubrication and Wear Reduction: There is rapid relative sliding between the piston and cylinder, as well as between the main shaft and bearing bush. To prevent excessive wear of components, an oil film needs to be established between the two sliding surfaces. A sufficiently thick oil film separates the surfaces of relatively sliding parts, thereby achieving the goal of reducing wear. Cooling: Engine oil can carry heat back to the oil tank and then dissipate it into the air, assisting the radiator in cooling the engine. High-quality engine oil can carry carbon deposits, sludge, and worn metal particles from engine components back to the oil tank through circulation, and flush away contaminants generated on the working surfaces of parts through the flow of the lubricating oil.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.