What should you do when encountering a stop signal ahead while driving a motor vehicle?

1 Answers
NadiaLee
07/30/25 2:59am
When encountering a stop signal ahead while driving a motor vehicle, stop in sequence behind the stop line. If there is no stop line, stop before the intersection. Below are additional details: 1. Roundabouts: Vehicles preparing to enter the roundabout must yield to vehicles already inside the roundabout. 2. Left turns: When making a left turn, turn from the left side near the center of the intersection. Turn on the turn signal when turning and use low beams when driving at night. 3. Right turns with same-lane vehicles waiting for a go signal: When making a right turn and encountering vehicles in the same lane waiting for a go signal, stop and wait in sequence. 4. Intersections without directional signal lights: At intersections without directional signal lights, turning motor vehicles must yield to straight-moving vehicles and pedestrians. Right-turning vehicles from the opposite direction must yield to left-turning vehicles.
Was this review help?
17
0
Share
More Forum Discussions

How to Determine When to Change Transmission Fluid?

Methods to determine when to change transmission fluid: Increased gear shifting hesitation, jerking while driving, or unusual noises from the transmission when the car is cold. Below is additional relevant information: Transmission fluid replacement interval: The replacement interval is approximately 40,000 to 80,000 kilometers. Functions of transmission fluid: It is a type of oil used to keep the gear system clean, ensuring proper transmission operation, extending the lifespan of the transmission components, providing effective lubrication at low temperatures, and reducing fluid loss under harsh operating conditions. Classification of transmission fluid: Based on the transmission structure, transmission fluid can be divided into: Automatic transmission fluid and manual transmission fluid.
1
2
Share

What's the reason for a car displaying 'service' and failing to start?

Here are the reasons why a car displays 'service' and fails to start: Anti-theft alarm: This is the vehicle's anti-theft indicator light, meaning the engine has entered an anti-theft state. It should turn off after inserting the key. If it doesn't, it means the key's signal is lost, and you can try another key or re-match it. Expired engine oil: It could be due to poor-quality engine oil or overdue oil maintenance. Press and hold the mileage reset button, insert the key and turn it to the position just before starting, wait for ten seconds, release the button, remove the key, wait a moment, and then start the car normally. If it still doesn't work, you may need to change the engine oil.
5
1
Share

How to Prevent Car Doors from Freezing in Winter?

The solution to prevent car doors from freezing in winter is: Cover the vehicle with a padded car cover after parking. The solutions for frozen car doors in winter are: 1. Pour water at around 60°C along the edges of the car door; 2. Use a hairdryer set to the warm air setting to blow on the frozen area. Solutions for other frozen parts of the car in winter are: 1. Frozen windows and windshield: After warming up the car, remove the snow from the body and glass, then set the heater to blow air onto the front windshield; 2. Frozen tires: Use an iron shovel to remove the ice roots, then shift into first gear or reverse, and gently press the accelerator or use idle speed to move the car back and forth; 3. Frozen car lock: Use a hairdryer to melt the ice on the lock.
1
3
Share

What is the Skoda car logo?

Skoda is the car logo of Škoda, and its models include Octavia, Superb, Kamiq, Rapid, and Rapid Spaceback. Taking the Škoda Octavia 2020 model as an example, its body dimensions are: length 4675mm, width 1814mm, height 1460mm, wheelbase 2686mm, fuel tank capacity 51l, and luggage capacity ranging from 590 to 1580l. The Škoda Octavia 2020 is equipped with a 1.2T turbocharged engine, with a maximum power of 85kW and a maximum torque of 200Nm, matched with a 7-speed dual-clutch transmission. It adopts a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam non-independent suspension.
1
2
Share

What is the working cycle of a gasoline engine?

The working cycle process of a gasoline engine consists of four strokes: intake, compression, combustion expansion, and exhaust. Below is the relevant introduction: Intake stroke: At this time, the piston is driven by the crankshaft to move from the top dead center to the bottom dead center, while the intake valve opens and the exhaust valve closes. When the piston moves from the top dead center to the bottom dead center, the volume above the piston increases, the gas pressure inside the cylinder decreases, creating a certain degree of vacuum. Since the intake valve is open, the cylinder is connected to the intake pipe, and the air-fuel mixture is drawn into the cylinder. When the piston reaches the bottom dead center, the cylinder is filled with fresh air-fuel mixture and the exhaust gases left from the previous working cycle. Compression stroke: The piston moves from the bottom dead center to the top dead center, with both the intake and exhaust valves closed. The crankshaft rotates under the inertia force of the flywheel, pushing the piston upward through the connecting rod, gradually reducing the gas volume inside the cylinder. The gas is compressed, and the pressure and temperature of the air-fuel mixture inside the cylinder increase accordingly.
5
5
Share

What does it mean when the anti-skid light is on in a Mercedes-Benz E260?

Mercedes-Benz E260 anti-skid light indicates a fault in the vehicle's Electronic Stability Program (ESP). Its function is to enhance the vehicle's handling performance while effectively preventing loss of control when the car reaches its dynamic limits. Taking the Mercedes-Benz E-Class 2021 260 Sport as an example, its body dimensions are: length 5078mm, width 1860mm, height 1484mm, wheelbase 3079mm, and fuel tank capacity 66l. The Mercedes-Benz E-Class 2021 260 Sport is equipped with a 1.5T turbocharged engine, with a maximum power of 135kW and a maximum torque of 280Nm, matched with a 9-speed automatic transmission.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.