What should you do when encountering a flooded road?

2 Answers
LunaMarie
07/23/25 11:29pm
When a motor vehicle encounters a flooded road or bridge, it should stop to assess the water conditions and proceed at a low speed only after confirming safety. Here is some information about motor vehicles: 1. Definition: A motor vehicle is a "vehicle" driven by its own power unit, equipped with two or more wheels, not requiring overhead lines or tracks, capable of traveling on roads or off-road surfaces, primarily used for transporting people, goods, or performing specific tasks. 2. Classification: Vehicle classification is a fundamental aspect of various vehicle standard systems. Different standards have different classification methods, which may cross-reference each other while also having their own focuses and distinctions. Only by correctly understanding and grasping the basic concepts and applicable scopes of different classification methods, and clarifying the connotation and extension of specific definitions, can one accurately apply relevant standard clauses in motor vehicle inspection practices, precisely determine vehicle types, and correctly issue inspection conclusions.
Was this review help?
12
3
Share
Holly
08/10/25 7:22pm
When encountering flooded roads while driving, I always exercise extreme caution. First, I stop the car to carefully assess the water depth. If the water level exceeds half of the wheel height, I absolutely detour or wait for the water to recede, never attempting to force my way through. Only after confirming it's safe to proceed do I engage a low gear and slowly enter, maintaining a steady speed of 10 to 15 km/h, avoiding sudden acceleration or braking to prevent water from surging in. During the process, I turn off the air conditioning to reduce the risk of the engine sucking in water. After safely passing through, I immediately lightly press the brakes a few times to dry the brake discs. In bad weather, carrying a water depth gauge provides more reliable measurements. Regularly checking the vehicle's underbody sealing helps prevent water ingress issues, especially getting a maintenance check before the rainy season for added peace of mind. A dashcam helps me record road conditions, keeping me calm in emergencies. Remember, safety is paramount—better to go slow than rush and risk vehicle damage or personal injury. Driving isn't a gamble; patience pays off.
Was this review help?
11
1
Share
Expand All
More Forum Discussions

What kind of oil should be used for Volkswagen Tharu?

Volkswagen Tharu uses 5w-40 or 0w40 fully synthetic original engine oil. For later maintenance and oil changes, you can choose from brands such as Mobil, Shell, and Castrol. Any 40-viscosity oil that meets Volkswagen's 502 certification can be used. For Volkswagen Tharu 1.4T and 2.0T models, 5w-40 fully synthetic oil is recommended. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity—5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother. The latter number represents the oil's kinematic viscosity at 100°C. A higher number means the oil can maintain its viscosity index better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the oil in a Tharu is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine for about 30 seconds to allow the oil in the main oil passage to drain out; Use a specialized wrench to remove the oil filter; Apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add new oil through the engine valve cover filler port, typically filling about three-quarters of the oil container; Start the engine and let it run for 5 minutes, checking for leaks around the oil drain plug and oil filter. If there are leaks, perform necessary repairs; After stopping the engine, pull out the oil dipstick to check that the oil level is within the standard range.
9
0
Share

How to Signal When Overtaking the Vehicle Ahead?

Overtaking the vehicle ahead involves the following signaling methods: 1. Turn on the left turn signal, observe the rear-view mirror to check for vehicles behind, and pay attention to changes in traffic conditions ahead; 2. Honk the horn or alternately switch between high and low beams to alert the vehicle ahead. Overtaking should be done from the left side for the following reasons: different driving styles, obstructed visibility when overtaking from the right, which compromises safety, while the left side provides better visibility, requiring only a slight deviation to the left to observe the road ahead. Precautions for overtaking include: 1. Choose the right moment to overtake, when there are fewer vehicles ahead or behind or the road is relatively flat; 2. Activate the left turn signal in advance to alert vehicles behind, and return to the normal lane promptly after overtaking; 3. Use the horn appropriately to alert the vehicle ahead of your intention to overtake and to yield; 4. Use high beams and hazard lights in combination to alert oncoming vehicles for safety; 5. Avoid forcing an overtake.
3
1
Share

What are the types of oil pumps?

Oil pumps are a type of hydraulic pump. In fact, there are many hydraulic pumps in automobiles, such as the power pump for hydraulic power steering and the oil pump for automatic transmissions. In hydraulic transmission control devices used in construction machinery, hydraulic pumps that generate power sources are essential. Generally, there are two types of oil pumps: one is the gear oil pump, and the other is the rotor oil pump. Gear oil pumps are divided into internal gear oil pumps and external gear oil pumps. The gear oil pump consists of a drive shaft, drive gear, driven shaft, driven gear, housing, etc. Two gears with the same number of teeth mesh with each other and are installed inside the housing. The radial and end clearances between the gears and the housing are very small. The drive shaft is key-connected to the drive gear, and the driven gear is mounted on the driven shaft. During operation, the drive gear drives the driven gear to rotate in the opposite direction. As the two gears rotate, the oil filled between the gear teeth is carried from the inlet chamber to the outlet chamber along the housing wall. On the side of the inlet chamber, a vacuum is created due to the disengagement of the gears and the continuous removal of oil, causing the oil in the oil pan to enter the inlet chamber through the filter under atmospheric pressure. On the other side of the outlet chamber, the oil is pumped out under a certain pressure through the meshing of the gears and the continuous squeezing of the oil. The rotor oil pump is a type of cycloidal gear pump that uses inner and outer rotors to pump lubricating oil. The rotor oil pump mainly consists of inner and outer rotors, such as the oil pump body and oil pump cover. The driving inner rotor and the driven outer rotor are installed inside the oil pump housing. The inner rotor has four convex teeth, and the outer rotor has five concave teeth. The inner rotor is fixed to the drive shaft, while the outer rotor can rotate freely within the oil pump housing, with a certain eccentricity between them. During operation, the inner rotor drives the outer rotor to rotate in the same direction. Due to the eccentricity and tooth profile of the two rotors, the tooth surfaces of the inner and outer rotors maintain line contact at any angle, forming four working chambers between the teeth of the inner and outer rotors. Since the inner rotor rotates faster than the outer rotor (with a transmission ratio of 5:4), when a working chamber rotates from the inlet, the rotors disengage, the volume gradually increases, creating a vacuum. Lubricating oil is sucked in from the inlet. As the rotors continue to rotate, the lubricating oil is carried to the other side of the outlet. At this point, the rotors engage, the volume of the oil chamber gradually decreases, the oil pressure increases, and the oil is squeezed out between the teeth and sent out through the outlet.
9
5
Share

What are the body dimensions of the Camry?

The body dimensions of the Camry are: length 4900 mm, width 1840 mm, height 1455 mm, with a wheelbase of 2825 mm. The fuel tank capacity is 60 liters, and the trunk volume is 593 liters. The Camry is equipped with a 2.0L engine, delivering a maximum power of 131 kW at 6600 rpm and a maximum torque of 210 Nm between 4400 and 5200 rpm. It is paired with a CVT continuously variable transmission and features front-wheel drive. The front suspension uses a MacPherson strut independent suspension, while the rear suspension employs an E-type multi-link independent suspension.
1
1
Share

How to Solve Electric Vehicle Charging Issues?

Do not accelerate abruptly. When going uphill or against the wind, it's best to assist with pedaling, which benefits both your battery and motor. Wait until the red light turns on before floating charging for an additional 1-2 hours. Avoid overloading or excessive weight during operation. When the instrument shows insufficient battery, switch to manual pedaling. Frequent sudden braking consumes battery capacity; higher designed speeds lead to greater battery wear. Prevent overcharging. Since prolonged exposure to sunlight affects battery lifespan, avoid leaving the battery under direct sunlight.
4
4
Share

How to Open the Door When the Sagitar Runs Out of Battery?

The method to open the door when the Sagitar runs out of battery is: 1. Remove the mechanical key from the smart key; 2. Insert the mechanical key into the small hole under the left front door handle. Taking the Sagitar 2021 200TS Manual Fashion Smart Link Edition as an example, its body dimensions are: length 4753mm, width 1800mm, height 1462mm, with a wheelbase of 2731mm. The Sagitar 2021 200TS Manual Fashion Smart Link Edition is equipped with a 1.2T 116 horsepower L4 turbocharged engine, with a maximum power of 85kW and a maximum torque of 175Nm.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.