What should you buy to keep in a new car?

1 Answers
OJude
07/30/25 8:42am
For a new car, you should purchase items like an umbrella, bamboo charcoal bags, a flashlight, and a car cover to keep inside. Below are some important considerations regarding items placed in the car: 1. Flammable items in the car: Car perfumes, lighters, and similar items are flammable, especially during hot summer months. Avoid placing these items in the car as high external and internal temperatures can easily lead to explosions or fires. 2. Unsuitable decorations: Avoid placing decorations with sharp edges inside the car. If the edges of these decorations face the occupants, it can easily lead to accidents. Particularly, if sharp edges face the driver, it may result in serious injuries.
Was this review help?
3
4
Share
More Forum Discussions

What to Do When a New Car Gets Flooded?

The correct approach is to first call the insurance company, as in such cases, it is essential to have the insurance company conduct an on-site inspection. Once the insurance company arrives, they will perform the inspection. During the inspection, it is crucial to disconnect the car's power supply, which means removing the negative terminal cable from the car battery. Below are additional details: Precautions: Generally, if a car is submerged in water exceeding 30 cm for an extended period, the internal wiring and circuits may be compromised. Dirty water can severely damage the bus lines, wiring harness interfaces, computer modules, and other circuit components. Oxidation of the circuits can lead to distorted module calculations, necessitating replacements.
10
0
Share

What does it mean when the ignition warning light is red and the car won't start?

Here are the reasons why the ignition warning light is red and the car cannot start: 1. Reason one: Poor quality gasoline that does not meet standards. This is usually caused by filling up with low-quality gasoline at non-standard gas stations, leading to incomplete combustion of the air-fuel mixture during engine operation and triggering the engine warning light. 2. Reason two: Oxygen sensor malfunction. There are two oxygen sensors installed in the car, one before and one after the three-way catalytic converter. The front oxygen sensor detects the air-fuel ratio under different engine operating conditions, and the ECU adjusts the fuel injection amount and calculates the ignition timing based on this signal. 3. Reason three: Mass airflow sensor malfunction. The mass airflow sensor, also known as the air flow meter, detects the amount of air intake and converts it into an electrical signal sent to the ECU. Based on the optimal air-fuel ratio, it indirectly determines how much fuel the ECU should inject.
4
1
Share

Where is the OBD connector of Peugeot 5008?

The OBD connector of Peugeot 5008 is located in the driver's cabin. There is a buckle with an OBD mark at the OBD interface. Open the buckle to see the OBD interface. OBD refers to the on-board automatic diagnosis system, and its functions are: 1. Locate and describe the faulty parts and components to facilitate maintenance; 2. Alarm the faults that cause excessive emissions to remind the increase of environmental impact caused by pollutant emissions. Taking the 2019 Peugeot 5008 as an example, it is a medium-sized SUV with a body size of 4670mm in length, 1855mm in width, 1650mm in height, a wheelbase of 2840mm, and a curb weight of 1541kg.
8
2
Share

What is the method to reset the maintenance light on the Peugeot 3008?

The method to reset the maintenance light on the Peugeot 3008 is: 1. Turn off the ignition switch; 2. Press and hold the maintenance mileage reset button; 3. Press the single trip meter reset button on the combination meter, and the odometer display will start counting down. When the display shows '0', the maintenance indicator light has been successfully reset. Taking the 2019 Peugeot 3008 as an example, it is a compact SUV with body dimensions of: length 4435mm, width 1840mm, height 1652mm, wheelbase of 2613mm, minimum ground clearance of 178mm, and a body weight of 1540kg.
4
0
Share

What kind of car is Aston Martin?

Aston Martin is a British car manufacturer based in Gaydon, England, specializing in the production of convertible grand tourers, racing cars, and limited-edition sports cars. The models under Aston Martin include: Aston Martin DB9, Rapide, Aston Martin DB11, V12 Vantage, Aston Martin DBX, etc. Taking the 2016 Aston Martin DB9 as an example, its body structure is a two-door four-seater hardtop sports car, with body dimensions of: length 4720mm, width 2061mm, height 1282mm, a wheelbase of 2740mm, a fuel tank capacity of 78L, a luggage compartment capacity of 186L, and a curb weight of 1785kg.
20
3
Share

What is the ground clearance of the Peugeot 4008?

The ground clearance of the Peugeot 4008 is 210mm. The Peugeot 4008 is a compact SUV under Dongfeng Peugeot. Taking the 2019 Peugeot 4008 as an example, its body dimensions are: length 4510mm, width 1850mm, height 1628mm, with a wheelbase of 2730mm. The 2019 Peugeot 4008 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6T turbocharged engine, delivering a maximum horsepower of 170PS, maximum power of 125kW, and maximum torque of 250Nm, paired with a 6-speed automatic transmission.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.