What should the tire pressure be for Maxus V90?

1 Answers
BrooklynLee
07/29/25 8:35pm
It is recommended to maintain a tire pressure of 230 kPa (2.3 bar). In addition to the clear instructions in the manual, owners can also find the tire pressure standard on the vehicle's label. The tire pressure label is usually located at the bottom of the B-pillar when the door is opened or inside the fuel tank cap. Maintaining tire pressure within the appropriate range: Air pressure is the lifeline of tires. Both too high and too low pressure will shorten the tire's service life. For safe driving, tire pressure needs to be maintained within the appropriate range. Tire pressure for different types of tires: For standard tires, the pressure should be within the range of 2.4–2.5 bar, while for reinforced tires, the pressure should be within the range of 2.8–2.8 bar.
Was this review help?
1
2
Share
More Forum Discussions

Can I get a license plate without a vehicle certificate of conformity?

You cannot get a license plate without a vehicle certificate of conformity. Here are some important points to note after purchasing a vehicle: 1. Driving without a license is prohibited: You can buy a car without a driver's license, but you cannot drive it on the road afterward, as driving without a license is illegal. 2. License plate registration: When registering the car after purchase, the driver's license will not be checked. To register a new car, you will need your ID card, certificate of conformity, purchase invoice, tax payment certificate for vehicle purchase tax, and insurance policy. At the vehicle management office, staff will inspect the vehicle and take photos. After registration, the owner will receive the vehicle registration certificate and the vehicle license. 2. The vehicle license must be carried with the car: When driving, you must carry both your driver's license and vehicle license. During the probationary period, driving on highways is not allowed.
11
3
Share

How many points can be deducted from a driver's license during the probationary period?

During the probationary period, a driver's license can be deducted up to 12 points. Below are the detailed regulations regarding point deductions during the probationary period. 1. It is advisable not to exceed 6 points within one year, otherwise the probationary period will be extended by one year. 2. If more than 6 points are deducted during the extended one-year probationary period, the driver will have to retake the driving test. 3. If everything proceeds normally during the one-year probationary period, the point deduction record will be reset in the second year. Note: If a motor vehicle driver accumulates a full 12 points during the probationary period, their driving qualification for the probationary vehicle type will be revoked. If the revoked driving qualification is not for the highest permitted vehicle type, the driver must also have their highest permitted vehicle type driving qualification revoked in accordance with Article 68, Paragraph 1 of the Traffic Law.
18
3
Share

What does SRS mean when it appears in a car?

Automotive SRS stands for Supplemental-Restraint-System, which refers to the airbag system. The airbag system is a passive safety protection system. When used in conjunction with seat belts, airbags can provide effective collision protection for occupants. SRS is the symbol for automotive airbags, indicating that an airbag device is installed at that location. More information about automotive airbags is as follows: 1. In the event of a car collision, automotive airbags can reduce head injuries by 25% and facial injuries by approximately 80%. 2. How airbags work: When an impact sensor detects a collision, the related control system determines the severity of the crash and decides whether to trigger the inflation device. The inflation module is typically composed of a gas generant (such as gasoline or explosives) combined with an ignition device. For safety during disposal, airbags are usually only detonated at high temperatures.
18
1
Share

What is the fuel tank capacity of a sedan?

The fuel tank capacity of a sedan generally ranges from 35 to 55 liters. The fuel tank is a container used in vehicles such as cars or airplanes to store fuel, and it is also a specialized container in hydraulic systems for storing hydraulic oil. In addition to storing gasoline, the fuel tank can also dissipate heat and separate air bubbles from the oil. It can be divided into two types: open fuel tanks and closed fuel tanks. Taking the Cavalier as an example of a sedan: 1. Its fuel tank capacity is 41 liters. It is positioned as a new compact sedan with dimensions of 4474mm in length, 1730mm in width, and 1471mm in height, and a wheelbase of 2600mm. 2. It is equipped with a 1.5L four-cylinder engine with a maximum power output of 109 horsepower, paired with a 5-speed manual or 6-speed automatic transmission.
11
4
Share

Can you change lanes on a solid yellow line?

No, solid lines indicate that crossing the line is prohibited, meaning you should drive without changing lanes. Here is more related information: Solid yellow line: Yellow lines are used to separate lanes of traffic moving in opposite directions, usually painted in the middle of the road like a barrier dividing the road into two directions. As long as it is a solid line, crossing is strictly prohibited, such as for overtaking, turning, or making a U-turn. Unless there are special circumstances, you should not cross the line while driving. Solid white line: White lines are used to separate lanes of traffic moving in the same direction. Solid lines mean you cannot merge or change lanes arbitrarily. The purpose of solid white lines is to divide lanes moving in the same direction, typically painted before traffic lights at intersections. Many drivers are caught violating traffic rules by crossing these lines, which are the most common type of markings involved in such violations.
10
3
Share

What are the body dimensions of the BMW 1 Series?

In terms of body dimensions, the BMW 1 Series measures 4239*1748*1421mm in length, width, and height, with a wheelbase of 2660mm. Introduction to the BMW 1 Series: 1. Exterior: It adopts BMW's new family design language, featuring a classic three-section aerodynamic front bumper derived from M models, paired with a honeycomb grille design. 2. Powertrain: It offers two powertrain options, including the 118i equipped with a 1.5T inline three-cylinder engine and the 120i equipped with a low-power version of the 2.0T inline four-cylinder engine. The 118i delivers a maximum power of 136 horsepower and a peak torque of 220 N·m, mated to a 6-speed automatic transmission. The 120i produces a maximum power of 192 horsepower and a peak torque of 280 N·m, paired with an 8-speed automatic transmission.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.