What should the indoor car air conditioning temperature be set to in winter?

2 Answers
DelAlaina
07/24/25 3:49pm
In winter, the most suitable temperature setting for car air conditioning is between 18℃ and 20℃. Here is relevant information about car air conditioning: 1. The function of car air conditioning is to adjust and control the temperature, humidity, air cleanliness, and airflow inside the vehicle to an optimal state. It also provides a comfortable environment for passengers, reduces travel fatigue, creates good working conditions for the driver, and serves as a crucial ventilation device for ensuring safe driving. 2. Car air conditioning consists of components such as the compressor, condenser, evaporator, expansion valve, receiver-drier, and piping. 3. Car air conditioning generally includes cooling devices, heating devices, and ventilation devices. These combined systems make full use of the limited space inside the vehicle, featuring a simple structure and ease of operation.
Was this review help?
15
0
Share
Robin
08/11/25 8:49am
In winter, setting the car air conditioning to around 22°C is most suitable. Higher temperatures like above 25°C can easily make people drowsy, especially during long-distance driving, where dozing off poses a safety hazard. I usually start the vehicle and turn on the cold air to defog the front windshield first. Once the glass is clear of fog, I adjust the temperature to around 20°C. If there are children in the car, slightly increase the temperature but keep it below 23°C, otherwise kids may sweat and become fussy, which can distract the driver. In terms of fuel consumption, 25°C uses about 10% more fuel than 20°C, saving both money and resources. Overall, a range of 20-22°C keeps you warm without wasting fuel.
Was this review help?
11
4
Share
Expand All
More Forum Discussions

Why is the water from the car air conditioner flowing into the car?

The reason water from the car air conditioner flows into the car is due to a clogged air conditioner drain pipe. Common causes of clogging: 1. Incorrect installation: After disassembling and reassembling the dashboard at a repair shop, the drain pipe may be installed incorrectly, causing water to flow into the car. A common symptom is water stains on the right front floor mat. 2. Evaporator coil blockage: If it's a new car, the evaporator coil may be internally clogged, or the drain outlet of the evaporator coil may not have been properly treated during manufacturing (a rubber film at the drain outlet prevents water from draining). 3. Drain pipe detachment: Another possibility is that the rubber drain pipe connected to the evaporator coil's drain outlet has come loose or is not properly secured.
2
2
Share

What brand is Gulf motorcycle?

Gulf Oil, a giant in the global lubricant industry, was established in 1901. After 115 years of development, it has become one of the world's oldest and most influential multinational oil companies. Gulf Oil (China) Co., Ltd. is the only wholly-owned subsidiary of Gulf Oil in China. Service scope: With London, UK, as its global strategic center, Gulf Oil has branches in over 100 countries and regions worldwide. Its business covers various sectors of the petroleum industry, including passenger vehicles, motorcycles, commercial transportation, construction, mining and steel, agriculture, industrial manufacturing, and maritime operations. Gulf Oil provides high-quality lubricants, maintenance products, and related services for these applications. Product series: Gulf Oil operates four world-class R&D centers and laboratories globally, over 20 top-tier lubricant factories, and more than 4,000 Gulf-branded gas stations. Gulf lubricant product series include: passenger vehicle lubricants, commercial vehicle lubricants, gas lubricants, motorcycle oils, industrial hydraulic oils, gear oils, industrial greases, engine coolants, marine and railway oils, compressor and refrigeration oils, engine coolants, and metalworking fluids, among many other specialized products. Its products have received unanimous recognition and official certification from numerous international groups such as Mercedes-Benz, BMW, Volkswagen, General Motors, Ford, Volvo, Cummins, Scania, MAN, Cincinnati, Deutz, and Siemens.
17
3
Share

Is the Audi Q5L domestically produced or imported?

Audi Q5L is domestically produced, manufactured by FAW-Volkswagen Audi. Below are the relevant details about the Audi Q5L: Body dimensions: The length, width, and height of the Audi Q5L are 4770mm, 1893mm, and 1667mm respectively, with a wheelbase of 2907mm. The wheelbase is 88mm longer compared to the overseas model. The body length of the new Q5L is 136mm longer than the current model. Powertrain: It is equipped with two engines: one is a low-power version of the 2.0-liter turbocharged engine, and the other is a high-power version of the 2.0-liter turbocharged engine. The low-power 2.0-liter turbocharged engine has a maximum power of 140 kilowatts and a maximum torque of 320 Newton-meters, paired with a 7-speed dual-clutch transmission. The high-power 2.0-liter turbocharged engine has a maximum power of 185 kilowatts and a maximum torque of 370 Newton-meters, also paired with a 7-speed dual-clutch transmission.
6
4
Share

Are there any follow-up issues if refueling without turning off the engine?

Forgetting to turn off the engine while refueling generally does not cause adverse consequences for the vehicle, but it poses certain safety hazards. During refueling, sediment may be stirred up, and fine particles could enter the fuel lines. If the engine is left running, the vehicle's electrical systems remain active, and the engine operates at high temperatures. In the event of an electrical short, this could potentially spark a fire. Therefore, it is essential to turn off the engine and power before refueling, and only restart the vehicle after completing the refueling process and securely closing the fuel tank cap. Below are some refueling precautions: 1. Precaution 1: Never refuel the car before turning off the engine. 2. Precaution 2: If the attendant has not turned off the fuel nozzle, the driver must never start the car, as this could easily lead to a fire. 3. Precaution 3: Avoid refueling during thunderstorms. This is also a safety measure to prevent lightning strikes and potential fires. Since automotive fuel is highly flammable, refueling releases flammable vapor into the surrounding air. If struck by lightning, the consequences could be catastrophic.
13
3
Share

Can a Repaired Frame Be Driven on Highways?

Realigning a displaced frame is referred to as straightening. However, the strength of a repaired frame will inevitably be inferior to its original factory condition. Theoretically speaking, if the damage was severe with significant frame deformation, even after repair, its rigidity during collisions may be compromised compared to before; moreover, the precision of the chassis may also be affected during aggressive driving. Below is relevant information: 1. Impact of Vehicle Repair: As long as the car drives straight without pulling to one side, the steering wheel remains stable at high speeds without shaking, and there's no uneven tire wear, then it should be fine; the vehicle frame is part of the automotive chassis structure, but most modern cars no longer use a frame-type chassis design, with only trucks and buses still utilizing it. 2. Vehicle Frame: The vehicle frame, also known as the chassis, serves as the foundation of the car, typically consisting of two longitudinal beams and several cross members, supported by the suspension system, front axle, and rear axle on the wheels.
2
4
Share

Will previously registered applicants be included in the driver's license reform?

Students who have already paid will follow the old pre-reform model, while new students will be subject to the new time-based fee regulations. Relevant details are as follows: 1. Changes in certification time: Students with good driving sense and quick learning ability can schedule both Subject 2 and Subject 3 exams simultaneously, significantly reducing the time to obtain the license. 2. Reform timeline: Pilot programs began in some cities in 2016, with nationwide promotion in 2018 and full implementation completed by 2019. 3. Reform content: The total required training hours for C1 and C2 licenses have been reduced by over 10 hours compared to before. Each session lasts 60 minutes, with effective training time no less than 45 minutes, and a maximum of 4 sessions per day. The new pay-after-training model requires no payment before passing Subject 1. Basic fees are paid after passing Subject 1, with separate hourly rates clearly marked for Subject 2 and Subject 3, following a pay-per-session structure.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.