What should the battery starting voltage reach?

How to Set Cruise Control on the Equinox?

Here's how to set the cruise control buttons on the Chevrolet Equinox: ① Press the RES button. ② Use the SET button to set the cruising speed. Before activating cruise control, you should set the speed using this button (Note: Cruise control can only be activated at speeds above 30km/h). ③ The +/- buttons are used to control the cruise control speed, with + to increase and - to decrease. Here's some additional information about the autonomous driving system: The autonomous driving system mainly includes lane keeping and adaptive cruise control. Lane keeping is an auxiliary system to cruise control, which alerts the driver through steering wheel vibrations or alarms when the vehicle approaches lane markings. Adaptive cruise control uses radar monitoring to detect the driving conditions of the vehicle ahead, automatically slowing down or accelerating as needed.

3

4

Share

Why Does the Clutch Shudder?

Clutch shudder mainly occurs due to the following reasons: 1. Uneven pressure distribution in the car's clutch: Loose or broken springs, or incorrect pressure positioning, leading to clutch instability. 2. Excessive tension in the clutch pressure springs: This causes the clutch to shudder. 3. Stiffness in components such as the release sleeve and release fork shaft, resulting in clutch shudder. 4. Oil contamination, cracking of the driven disc lining, or uneven thickness of the driven disc causing shudder. 5. Warping of the main or driven discs, or inconsistent heights of the release levers leading to clutch shudder.

9

5

Share

What is the weight of the Emgrand GL?

The weight of the Emgrand GL is approximately 1.4 tons. Below is more information about the Emgrand GL: 1. The Emgrand GL was officially launched on September 20, 2016, at the Hangzhou International Expo Center. As the fourth model of Geely's premium 3.0 generation, the Emgrand GL filled the gap in Geely's A+ sedan market. 2. The letter 'G' in Emgrand GL represents its higher positioning within the Emgrand series, also implying that the Emgrand GL has a spacious interior. 3. In terms of exterior design, the Emgrand GL features a 'fastback' line and a short-tail shape, giving it a more dynamic visual appeal. The side profile is sleek and elongated, creating a fuller visual effect. 4. For the interior, the aircraft-inspired wraparound cockpit design is simple and elegant. The leather seats and leather-wrapped armrests with neat stitching craftsmanship exude a sense of quality and sophistication.

18

3

Share

Which Lane Should You Use for a U-Turn?

For a U-turn, you should use the leftmost lane. There are two scenarios for turning: left turns should be made from the leftmost lane, and right turns from the rightmost lane. The following situations allow for a U-turn: Presence of a U-turn signal or sign: When there is a U-turn signal at an intersection, you can make a U-turn when the U-turn signal is green. If there is a U-turn sign at the intersection or a U-turn marking on the lane, you can make a U-turn as long as you ensure the safety of yourself and others. No U-turn sign but left turns are allowed (no prohibition of U-turns): At intersections where left turns are permitted and there are no signs or markings prohibiting U-turns, you can make a U-turn. It is important to note that you must proceed according to the left-turn signal without interfering with other vehicles. If there is a left-turn waiting area at the intersection, you can enter the waiting area when the straight signal is green and wait until the left-turn signal turns green to make the U-turn. U-turns are allowed at dashed lines: Whether it's a white or yellow dashed line, U-turns are permitted. If it's a double yellow line with one solid and one dashed, check whether your side is the dashed line. If it is, you can make a U-turn safely; if it's solid, you cannot. At intersections with double yellow lines (one solid, one dashed), you can make a U-turn from the dashed side but must not cross the stop line ahead. U-turns are allowed at yellow grid lines: Parking is prohibited in yellow grid areas, but as long as there is no central barrier, you can make a U-turn here after yielding to normally moving vehicles. U-turns are allowed on the side with dashed lines near green belts: When the area in front of the green belt is marked with a dashed line, vehicles on that side can make a U-turn there. If the area is marked with a solid line, vehicles must follow the traffic signal, cross the pedestrian crossing, and then make the U-turn. U-turns over solid lines or pedestrian crossings are prohibited.

14

1

Share

What is the purpose of the protrusion under the Leiling accelerator pedal?

The protrusion under the Leiling accelerator pedal is an accelerator pedal limiter, which protects the accelerator pedal mechanism from being damaged by excessive force, shortens the pedal travel, and prevents novice drivers from pressing the accelerator too hard, serving as a limiting function. Here are some details about the accelerator pedal: 1. The accelerator pedal is a car accessory that allows drivers to operate the pedal more freely and enhances driving safety. Most are designed with aluminum alloy, and adding an accelerator pedal can significantly increase the vertical contact area of the pedal. 2. Currently, there are two types of accelerator pedals in cars: 'floor-mounted' and 'suspended'.

14

0

Share

What does trouble code C0041 mean?

C0041 trouble code, applicable to all automobile manufacturers, means Brake Pedal Switch B (Subfault). Here is some information about the brake pedal: 1. Function of the brake pedal switch: It transmits the information of whether the brake pedal is pressed or not to the electronic control unit (ECU) in the form of an electrical signal, serving as an important basis for stopping cruise control and disengaging the torque converter. 2. Automobile trouble codes: These are codes reflected by the vehicle's ECU after analyzing a fault. Automobile trouble code query software can query standard OBD and non-standard OBD system trouble codes, including all trouble codes of the PBCU 4 systems.

12

1

Share

What should the battery starting voltage reach?

How to Set Cruise Control on the Equinox?

Why Does the Clutch Shudder?

What is the weight of the Emgrand GL?

Which Lane Should You Use for a U-Turn?

What is the purpose of the protrusion under the Leiling accelerator pedal?

What does trouble code C0041 mean?

What are the functions of the Smart gear?

What are the three major brands of new energy vehicles?

What Causes the Abnormal Noise During Ignition After Replacing the Starter?

Which country does the Land Rover brand belong to?