What should I pay attention to when driving long distance for the first time?

1 Answers
OJuliana
07/28/25 5:12pm
For the first long-distance drive, it is important to maintain a safe distance, be cautious of large trucks, minimize lane changes, and maintain safe driving awareness. Maintain a safe distance: At a speed of 100 km/h, you should keep a distance of at least 80 meters from the vehicle in front. This not only allows time for braking but also provides room for error. Be cautious of large trucks: When driving near trucks, be alert to their sudden lane changes. Since truck turn signals are often less noticeable, pay close attention to them. Minimize lane changes: Reduce lane changes as much as possible. When changing lanes, always signal first, then check the rearview mirror. If there are blind spots (especially on the right side), turn your head to ensure a clear view. Maintain safe driving awareness: Always keep a safe driving mindset and never let your guard down. With this awareness, you can enhance your defensive driving and avoid most potential accidents.
Was this review help?
19
4
Share
More Forum Discussions

What parts need to be replaced during the third maintenance of Kia Sportage?

The regular items for the third maintenance of Kia Sportage include replacing engine oil, oil filter, air filter, cabin air filter, spark plugs, etc. Some brand manufacturers may add additional maintenance items. The reason for these factors depends on the service life of the car parts. Some parts have a shorter service life and are prone to contamination, so they need to be replaced frequently. Other parts have a longer service life and thus a longer replacement cycle. The specific details are as follows: 1. Engine oil replacement: Under the harsh conditions of high temperature and high pressure inside the engine, the shelf life of engine oil is significantly shortened, its performance greatly declines, and it loses its protective effect on the engine. The replacement cycle for mineral oil is about 5,000 kilometers; for synthetic oil, it is about 10,000 kilometers. 2. Oil filter replacement: To ensure the cleanliness of the oil circuit, the engine is equipped with an oil filter in the lubrication system. Its purpose is to prevent impurities from mixing into the oil, causing oxidation and producing sludge that can clog the oil circuit. The replacement cycle for the oil filter is the same as that for the engine oil, and it must be replaced simultaneously with the oil. 3. Air filter replacement: The air filter serves to block dust and particles inhaled by the engine during the intake process. If the filter is not cleaned for a long time, dust can enter the engine, causing abnormal wear on the cylinder walls. It is best to clean the air filter every 5,000 kilometers by blowing it clean with an air gun, and replace it every 10,000 kilometers.
16
2
Share

What is the method to permanently eliminate the three-way catalytic converter fault light?

The three-way catalytic converter fault light cannot be eliminated. When the vehicle's three-way catalytic converter is functioning properly, the fault light will not illuminate. If the three-way catalytic converter light comes on, it indicates a malfunction in the vehicle's three-way catalytic converter, which requires inspection and repair. The three-way catalytic converter transforms harmful gases such as CO, HC, and NOx from vehicle exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction processes. It features stable performance and reliable quality, and the product is widely compatible with models from Toyota, Honda, Buick, Audi, Volkswagen, Hyundai, Suzuki, Changhe, and others.
2
3
Share

How to Use Lights When Pulling Over at Night?

Nighttime temporary pull-over light usage method: First, turn on the hazard warning flashers. After the vehicle is pulled over and the hazard warning flashers are activated, the driver should try to stay away from the malfunctioning vehicle and turn off the high beams and low beams to avoid battery drain. Below are the relevant details: 1. Using high beams for illumination: When driving at night on national highways, expressways, or roads without street lighting, drivers should use high beams for illumination. When high beams are on, a prominent blue light will illuminate on the dashboard as a reminder. 2. Using low beams for illumination: When encountering oncoming traffic, promptly switch back to low beams to prevent the glaring high beams from causing dazzle to the other driver and interfering with their line of sight.
9
0
Share

How to Adjust a Noisy Motorcycle Small Chain?

Motorcycle small chain noise adjustment requires operating the tensioner adjuster to achieve chain tension. The specific steps are: 1. Loosen the fixing screw; 2. Rotate by hand to loosen the screw halfway; 3. Use a flat-head screwdriver to rotate the tension shaft clockwise to loosen it; 4. Rotate counterclockwise to lock it. Precautions for using motorcycle chains include: 1. Regularly clean the motorcycle chain during normal riding, and apply special lubricating oil after cleaning; 2. Ensure quality when purchasing motorcycle chains, preferably choosing original factory parts.
4
4
Share

What is the difference between Audi 35, 40, and 45?

Audi's 35, 40, and 45 designations on the rear of the vehicle indicate the horsepower of the engine. The larger the number, the greater the horsepower of the engine, and consequently, the better the performance. Here is some relevant information about Audi: 1. Introduction: A luxury car brand, its logo consists of four interlocking rings. Currently a subsidiary of Volkswagen AG in Germany. On December 20, 2018, Audi ranked 51st in the 2018 World's 500 Most Influential Brands list. 2. History: The history of German Audi AG in manufacturing cars and motorcycles dates back to the 19th century. Originally, four car companies in Saxony—Audi and Horch in Zwickau, Wanderer in Chemnitz-Siegmar, and DKW in Zschopau—made outstanding contributions to the advancement of the German automotive industry at that time.
4
2
Share

What Causes High Idle Speed in a New Car?

High idle speed in a new car is caused by: excessive intake air during idling, excessive fuel injection, or incorrect engine control signals. Idling refers to the operation of the engine under no-load conditions, where it needs to overcome the frictional resistance of internal components and maintain the minimum speed for stable engine operation. The idle speed is adjusted by regulating the throttle opening size and the idle fuel supply. The hazards of high idle speed include: 1. Increased engine carbon deposits; 2. Shortened engine lifespan; 3. Overly rich air-fuel mixture in the engine, which can easily damage the three-way catalytic converter; 4. Loosening of the vehicle's braking system, increasing the risk of accidents; 5. Increased exhaust emissions from the vehicle's cylinders.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.