What should I do if the engine warning light of Wuling Rongguang is on?

2 Answers
DeAmy
07/29/25 6:03am
If the engine warning light is on, you can follow these steps: First, check whether the engine is running normally and whether there are problems such as shaking or black smoke. If so, try not to start the engine again. It is particularly important to note that you must not start the engine if the red light is on. If the engine can be started, turn it off for 5-10 minutes, then without pressing the brake, press the start button once, or without pressing the clutch, turn the car key halfway to the 'on' position. After the car is powered on, the self-check function will be activated. Wait for 5-10 seconds and observe whether the warning light on the dashboard goes off. If the warning light does not go off, please go to a service station as soon as possible to find out the cause. The service station can use a portable diagnostic device to read the fault code, obtain fault information, and carry out targeted repairs. There are mainly 7 reasons why the engine warning light is on: Sensor failure: The sensors mentioned here include water temperature, crankshaft position, air flow, intake temperature, oxygen sensor, etc. When these sensors are damaged, have poor contact, or the signal is interrupted, the car's ECU cannot accurately obtain engine data, which will cause the engine warning light to come on. Fuel quality issues: If fuel and engine oil are not added as required by the manufacturer, it may cause engine wear and lead to the warning light coming on. Poor combustion of the mixture: Poor combustion of the mixture can cause engine carbon deposits or knocking. After being detected by the oxygen sensor and reported to the ECU, the warning light will come on as a warning. Spark plug failure, ignition coil failure, fuel pump failure, and fuel line blockage can all cause poor combustion of the engine mixture. Turbocharging issues: The intake turbocharging pipeline and turbocharger can also cause the engine warning light to come on. The most common is turbocharger damage, accompanied by symptoms such as oil leakage, high oil consumption, reduced power, metal noise, and blue or black smoke from the exhaust pipe. Intake issues: If there is a problem with the car's intake, it may cause engine pipeline blockage, and in severe cases, the engine warning light will come on. If the air filter is not clean and not regularly cleaned, it can lead to intake problems. Exhaust issues: Exhaust faults can also cause the engine warning light to come on. The rear oxygen sensor, three-way catalytic converter, exhaust camshaft, and bearing faults are all causes of exhaust problems, with the three-way catalytic converter being the most common. Using leaded gasoline, lead or silicon-containing lubricant additives, impact damage to the three-way catalytic converter, and engine fuel supply system faults can easily cause three-way catalytic converter failure. Anti-theft system failure: If the car's electronic anti-theft system malfunctions, or if the anti-theft controller does not match the engine electronic controller, the anti-theft system can also cause the engine to malfunction and the warning light to come on.
Was this review help?
16
3
Share
McTaylor
08/12/25 9:33am
I usually drive to and from work, and have been driving a Wuling Rongguang for over ten years. The other day, the engine light came on while I was on the highway, which made me nervous. I immediately slowed down, turned on the hazard lights, and pulled over. After turning off the engine, I tried restarting it, but the light was still flashing yellow—probably a sensor issue or a clogged fuel line. I did a quick check under the hood: made sure the engine oil and coolant levels were adequate, as low levels can trigger warnings. I also checked the dashboard for other warning lights, like the brake or oil pressure light, which would require immediate attention. Safety first—don’t rush to keep driving! I then used my phone’s GPS to find the nearest repair shop or 4S dealership for a check-up. It turned out to be a minor sensor fault, and replacing it fixed the issue. Ignoring it could have led to costly engine damage, so I always advise friends not to delay when a warning light comes on—either do a quick check yourself or get it professionally inspected right away.
Was this review help?
17
2
Share
Expand All
More Forum Discussions

What Causes Steering Wheel Buttons to Malfunction?

Possible reasons for malfunctioning steering wheel buttons in a car are as follows: Functional Faults: Generally, the multifunction steering wheel of a vehicle includes features such as adjusting multimedia volume, Bluetooth phone calls, and skipping multimedia tracks. When these functions malfunction or behave abnormally, you can manually operate the multimedia buttons on the center console or the corresponding function buttons/knobs on the touchscreen to verify whether it is a functional fault. Mechanical Faults: Buttons are consumable components that wear out during use, leading to a shortened lifespan. It is also possible that functional failures and uncontrollable quality issues arise due to poor quality, unreasonable design, or immature manufacturing processes. When the first functional verification is passed, the focus should then shift to inspecting the buttons.
1
4
Share

Is it necessary to repair a cracked front bumper?

It is necessary to repair a cracked front bumper. Reasons for repair: The car bumper is a safety device designed to absorb and mitigate external impacts, protecting the front and rear of the vehicle. Owners can choose to repair or replace it based on the extent of the damage. For minor damage, welding repairs can be performed. If the damaged area exceeds the standard for welding repairs, a new bumper should be replaced. Repair methods for the bumper: First, sandpaper and a grinder are used to sand the damaged area, removing the surrounding paint. Clean the area with plastic cleaning fluid to eliminate dirt and impurities. Cut a stainless steel repair mesh to match the size of the damaged area, place it over the damage, fill with putty, and wait for it to dry before repainting.
10
4
Share

Can I Disconnect One Side of the Battery Cable If the Car Is Not Driven for a Long Time?

It is acceptable to disconnect one side of the battery cable if the car is not driven for a long time. Reasons for disconnecting one side: When a vehicle is parked for an extended period, the electrical system will continue to drain the battery. If left long enough, the battery may be completely depleted or even damaged. Therefore, disconnecting the cable is advisable if the vehicle will not be used for an extended period. Steps to disconnect: Open the driver's side door, pull the hood release lever located on the left side near the driver's leg area, and lift the engine hood. Use the support rod to hold the hood open, then use a wrench to remove the negative terminal connection.
9
4
Share

What is the mnemonic for the valve adjustment sequence of a 6-cylinder engine?

The mnemonic for the valve adjustment sequence of a 6-cylinder engine is 1-5-3-6-2-4. Meaning of the adjustment sequence: When the piston of cylinder 1 is at top dead center, cylinders 5 and 3 are exhaust ports, while cylinders 2 and 4 are intake ports. When the crankshaft rotates 360 degrees, cylinders 5 and 3 become intake ports, and cylinders 2 and 4 become exhaust ports. Method for adjusting valve clearance: Rotate the crankshaft to position the piston of cylinder 1 at compression top dead center, aligning the flywheel mark with the inspection hole mark. At this point, valves 1, 2, 4, 5, 8, and 9 can be adjusted. Rotate the crankshaft one full turn to position the piston of cylinder 6 at compression top dead center, then adjust valves 3, 6, 7, 10, 11, and 12. During adjustment, turn the adjusting screw while inserting a feeler gauge between the valve stem end and the rocker arm, moving it back and forth until slight resistance is felt.
19
2
Share

How much engine oil is appropriate for a BMW X3?

It is appropriate to add 4.8 liters of engine oil to a BMW X3. Engine oil, also known as motor lubricant, serves multiple functions for the engine, including lubrication and friction reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption and buffering. The BMW X3 has the following body dimensions: length 4717mm, width 1891mm, height 1689mm, with a wheelbase of 2864mm. It features a fuel tank capacity of 65 liters and a curb weight of 1860kg. The BMW X3 is equipped with a 2.0-liter turbocharged engine, delivering a maximum power of 135kW at 5000 to 6500 rpm and a maximum torque at 1350 to 4250 rpm, paired with an 8-speed automatic transmission.
5
4
Share

What is the battery size of the Buick LaCrosse?

Buick LaCrosse uses a 69Ah battery. The battery, also known as a storage battery, works by converting chemical energy into electrical energy. The Buick LaCrosse has a body size of 5026mm in length, 1866mm in width, and 1462mm in height, with a wheelbase of 2905mm. Its fuel tank capacity is 60 liters, and the trunk capacity is 523 liters. The Buick LaCrosse is equipped with a 2.0T turbocharged engine, delivering a maximum power of 174 kW at 5000 rpm, paired with a 9-speed automatic manual transmission. It features a front McPherson independent suspension and a rear multi-link independent suspension.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.