···
Log in / Register

What should I do if the Buick Excelle's body shakes while driving?

4 Answers
Shelly
07/29/25 8:00pm

If the Buick Excelle's body shakes while driving, it is recommended to perform a four-wheel dynamic balance and four-wheel alignment. If the issue persists after these adjustments, consider replacing the steel rims. Possible causes of body shaking while driving include: 1. Insufficient tire pressure; 2. Incorrect front wheel camber angle data; 3. Loose front lower control arm ball joints, which can also cause lateral swaying; 4. Excessive steering gear clearance, which can also lead to lateral swaying; 5. Loose steering ball joints, which can also result in lateral swaying. A car's wheel is an assembly consisting of the tire and the rim. However, due to manufacturing variations, the mass distribution of this assembly may not be perfectly uniform. When the wheel rotates at high speeds, this can lead to dynamic imbalance, causing the wheel to shake and the steering wheel to vibrate while driving. To prevent or correct this phenomenon, weights are added to the wheel in dynamic conditions to balance the edges of the wheel. This correction process is known as dynamic balancing.

Was this review help?
2
3
Share
DiJoshua
08/14/25 3:57pm

My Buick Excelle drives with a body sway like being on a boat, and once on the highway, it made me feel uneasy. It’s probably an issue with the tire balance—after several years of driving, uneven tire wear can easily cause this. The suspension system is also a suspect, such as aging shock absorbers leaking oil, loose control arm ball joints, or worn wheel hub bearings, which can also lead to swaying. When I took it to the shop for a check, it turned out to be a tire issue—rebalancing them fixed the problem. I suggest you don’t delay; first, check the tire wear and air pressure, then have a professional inspect the suspension. Prolonged swaying can damage the car and is dangerous, so a thorough check at a reliable repair shop is the most worry-free solution.

Was this review help?
8
1
Share
Expand All
WilliamAnn
10/15/25 8:40am

Experiencing shaking while driving a Buick Excelle? As someone who frequently repairs vehicles, I recommend checking the tires first. Imbalanced or severely worn tires can cause the car to shake as they rotate unevenly. Don’t overlook the suspension system—failed shock absorbers or loose control arms are common culprits. Worn-out wheel bearings can also lead to vibrations. Additionally, warped brake rotors should not be ignored. It’s best to perform a four-wheel alignment; a professional diagnostic at a repair shop can quickly pinpoint the issue. Minor problems can be fixed by replacing parts yourself, but for complex issues, let a professional technician handle it. Don’t dismiss it as a minor issue—severe shaking indicates worn or deformed components, and timely repairs can prevent bigger problems.

Was this review help?
9
4
Share
Expand All
VanEmiliano
11/29/25 2:42am

When my Buick Excelle starts shaking, I get nervous—it's likely a tire or suspension issue. First, check the tires for bulges, wear, or incorrect pressure. Then, inspect suspension components like shock absorbers and control arms. Uneven brake rotors could also cause vibrations. Get it checked by a professional ASAP—don't risk driving a shaky car. Safety comes first.

Was this review help?
7
3
Share
Expand All
More Forum Discussions

Where is the cigarette lighter fuse located in the Envision?

The cigarette lighter fuse in the Envision is located in the fuse box on the passenger side. You need to open the passenger side fuse box to find the corresponding fuse number for replacement. In the Envision, there are three fuse boxes in total: one in the cabin, one in the trunk, and another near the passenger seat. The cigarette lighter fuse is located in the fuse box near the passenger seat. On the fuse box cover, each fuse is labeled with its number and corresponding function. Owners simply need to check the cover to find the cigarette lighter fuse number and then locate the corresponding fuse inside the box. As a global next-generation strategic model for General Motors, the Envision's exterior design inherits the essence of the ENVISION concept car.
19
3
Share

How to Repair Scratches on Car Wheel Hubs?

Steps to repair scratches on car wheel hubs: 1. Clean the wheel hub to facilitate inspection of all scratches, scratch depth, and whether the hub is cracked. If the hub surface has cracks, deformation, or is completely broken, it cannot be repaired. Only hubs that are not broken or deformed can be repaired; 2. After cleaning, use degreasing wax paper to wipe the hub clean; 3. After smoothing the putty, repaint the hub. Spray the hub spray onto the applied putty, gently spraying back and forth a few times to complete the entire process of repairing the scratched hub; 4. The scratched areas of the hub are usually rough, so use fine sandpaper to smooth them out.
14
4
Share

Why does the Volkswagen mechatronic unit fail?

Because the transmission mechatronic unit has high requirements for shifting and maintenance, if the lubrication level of the transmission fluid fails to meet the standard, the transmission will suffer from prolonged insufficient lubrication. This accelerates wear and tear on the transmission, leading to mechatronic unit failure and shortening the transmission's service life. Symptoms of a faulty transmission mechatronic unit include: 1. Illumination of the gear position indicator on the car dashboard. 2. Vehicle shaking, inability to upshift, loss of odd-numbered gears or even-numbered gears, and in severe cases, the vehicle may become inoperable. 3. Appearance of fault codes indicating failure to engage gears, or accidental opening/closing of the clutch.
15
0
Share

Should the Avancier 240 use 92 or 95 octane fuel?

The Avancier 240 Turbo model uses 92 octane fuel. The Avancier is a mid-size SUV under Honda, with dimensions of 4858mm in length, 1942mm in width, and 1670mm in height, and a wheelbase of 2820mm. The Avancier is equipped with two engines: a 1.5L naturally aspirated engine and a 2.0L naturally aspirated engine. The 1.5L naturally aspirated engine delivers a maximum power of 142 kW and a maximum torque of 243 Nm, with the maximum power achieved at 5600 rpm and the maximum torque available between 2000 to 5000 rpm. This engine features VTEC technology and direct fuel injection, and utilizes an aluminum alloy cylinder head and block, paired with a CVT transmission.
5
1
Share

What Causes a Slight Vibration in the Brake Pedal?

Brake pedal experiencing a slight vibration is mainly due to the following reasons: 1. Uneven tread wear on both sides of the tires or different tire pressures. 2. Deformation of the brake disc. 3. Loose screws on the underbody shield. Automobile brake pedal operations are divided into: slow braking (i.e., anticipatory braking), emergency braking, combined braking, and intermittent braking. Generally, during slow braking and emergency braking, before the wheels lock up and the vehicle comes to a stop, the clutch pedal should be fully depressed to prevent the engine from stalling and to facilitate speed adjustment.
10
5
Share

Where to Apply for ETC for Multiple Vehicles Under One Name?

If you have multiple vehicles under your name, you can bring your ID card to a bank to sign up for ETC service. After completing the application, you can directly install and activate the device. Alternatively, you can take the bank agreement to an ETC service outlet for installation and activation. The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU. A red light will briefly illuminate, and the OLED screen will display "Tag Invalid, Please Insert Card," indicating the device is functioning properly. Clean the front windshield, ensuring the surface is smooth, clean, and dry. Then peel off the protective film on the OBU adhesive and attach it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield. The chip should be inserted into the OBU device. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Promotes low-carbon travel by allowing vehicles to pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Cost-efficient: Saves money by reducing the frequency of vehicle starts and brakes, lowering wear and fuel consumption. Users also enjoy a 5% discount on toll fees; Improved efficiency: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC systems more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.