···
Log in / Register

What should I do if I accidentally change lanes in a tunnel?

4 Answers
JamesRose
08/26/25 4:16am

Changing lanes in a tunnel results in a 3-point deduction and a fine of 200 yuan. According to Article 90 of the Road Traffic Safety Law, if a motor vehicle driver violates the road traffic safety laws and regulations regarding road traffic regulations, they shall be given a warning or fined not less than 20 yuan but not more than 200 yuan. In cases otherwise stipulated by this Law, punishment shall be imposed in accordance with the provisions. Relevant information about traffic signs is as follows: 1. Introduction: Traffic signs are road facilities that convey guidance, restrictions, warnings, or instructions through text or symbols. They are also known as road signs or road traffic signs. 2. Importance: In traffic signs, the general principle is safety. Setting up eye-catching, clear, and bright traffic signs is an important measure to implement traffic management and ensure road traffic safety and smoothness.

Was this review help?
2
1
Share
LailaLynn
09/08/25 5:29am

A few days ago, I accidentally changed lanes in a highway tunnel. The tunnel was particularly dark, and when I glanced in the rearview mirror, I couldn't see clearly behind me, so I turned the steering wheel. My heart raced, and I quickly and gently steered back to the original lane. Thankfully, no cars collided. Afterward, I was terrified and reminded myself that tunnels are not places for random lane changes—narrow lanes and poor visibility can easily lead to accidents. Now, when approaching a tunnel, I slow down in advance, check the lane markings clearly, and maintain a centered position. If I do make a mistake, I avoid slamming the brakes or jerking the wheel abruptly. Instead, I stabilize my speed and adjust gradually, stopping to rest only after exiting the tunnel and confirming it's safe. I also practice tunnel driving more often in daily life to reduce the risk of errors.

Was this review help?
18
2
Share
Expand All
OMiles
10/22/25 5:33am

As someone who has been driving for over a decade, tunnel lane mischanges happen rarely but require quick handling. Gently steer back to the original lane without rushing to accelerate or decelerate, maintaining a steady speed for smoothness. Tunnel environments are special with low visibility and hard-to-judge distances, making lane changes prone to scrapes. If a car approaches quickly, immediately turn on hazard lights to signal safety. Then drive out normally and find a place to stop and reflect on why the mistake occurred—often due to unfocused vision. Developing the habit of concentrating on the car ahead and rearview mirrors in tunnels is key to reducing distractions. Regularly experiencing driving under different lighting conditions can train intuitive reactions.

Was this review help?
17
4
Share
Expand All
LaDerek
12/05/25 5:56am

After mistakenly changing lanes in a tunnel, the first priority is safety. Quickly move to the emergency stopping lane or a safe area by the tunnel side, and turn on the hazard warning lights. Check the rearview mirror to ensure no vehicles are tailgating, and confirm the surroundings are safe. Tunnel air can be stuffy, and staying too long may lead to suffocation, so avoid continuing to drive recklessly. After calming down, gently steer back to continue driving. Remember, changing lanes in tunnels is extremely dangerous due to poor lighting and narrow lanes, which can easily lead to loss of control. Avoid unnecessary steering and focus on maintaining your lane.

Was this review help?
8
5
Share
Expand All
More Forum Discussions

What are the differences between hybrid and plug-in hybrid vehicles?

Different powertrain systems between hybrid and plug-in hybrid vehicles: Plug-in hybrids rely entirely on electricity for propulsion, whereas conventional hybrids primarily use the battery as the power source at speeds between 30 to 40 km/h. Beyond this speed range, they either switch completely to gasoline or utilize a combination of gasoline and electricity, distinguishing their powertrain systems. 2. Different fuel consumption between hybrid and plug-in hybrid vehicles: According to the latest 2019 "National New Energy Vehicle Subsidy Policy," plug-in hybrid vehicles must have a minimum NEDC pure electric range of 50 km. Therefore, for daily commutes within 50 km, plug-in hybrids are more fuel-efficient. However, if the daily commute exceeds the battery's range, conventional hybrids tend to be more fuel-efficient than plug-in hybrids. 3. Different range capabilities between hybrid and plug-in hybrid vehicles: Compared to plug-in hybrid models, conventional hybrid vehicles offer greater convenience and ease of use, especially given the current lack of widespread charging infrastructure. Additionally, conventional hybrid vehicles typically have a significantly longer driving range than plug-in hybrids.
12
0
Share

What does a car IV bag clean?

Car IV bag is a non-disassembly cleaning method, mainly used to clean the intake system, fuel system, and three-way catalytic system. The advantage of the car IV bag cleaning method is that it causes less damage to mechanical components. Detailed introduction is as follows: 1. The intake system consists of an air filter, air flow meter, intake pressure sensor, throttle body, auxiliary air valve, idle control valve, resonance chamber, power chamber, intake manifold, etc.; 2. The fuel system is generally composed of a fuel pump, fuel filter, fuel injector, etc., and its function is to ensure the fuel flow required by the engine under various working conditions and states; 3. The three-way catalytic system refers to the catalytic process that converts harmful gases such as CO, HC, and NOx emitted from automobile exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction. It mainly uses a three-way catalytic converter. The carrier component of the three-way catalytic converter is a porous ceramic material installed in a specially designed exhaust pipe. It is called a carrier because it does not participate in the catalytic reaction itself, but is covered with a layer of precious metals such as platinum, rhodium, palladium, and rare earth coatings. It is the most important external purification device installed in the automobile exhaust system.
6
5
Share

What is the 730 car?

730 includes BMW 730 and Baojun 730. Below is the relevant introduction of Baojun 730: 1. Powertrain: Equipped with a "1.5T turbocharged engine + simulated 8-speed CVT continuously variable transmission" powertrain combination. The engine has a rated power of 111kW and a maximum net torque of 250N·m. The turbo intervenes at around 1000 rpm and reaches the maximum torque of mainstream 2.4L naturally aspirated engines on the market at 1600 rpm. 2. Configuration: Standard with an 8-inch floating central multimedia screen, while higher-end models feature a 7-inch full LCD instrument panel. The new car comes with functions like Car-play and SSP-LINK in-car connectivity platform, supporting both Android and Apple systems simultaneously. 3. Interior: The interior of the new Baojun 730 automatic transmission adopts a new black-gray color scheme, paired with dark wood-grain imitation panels on the dashboard, ice-blue ambient night lighting, and new dual-tone luxury seats, giving the interior a sense of layering, quality, and visual spaciousness.
11
5
Share

Can a vehicle continue driving after crossing the stop line when the light turns red?

If a vehicle has crossed the stop line when the light turns red, it should not continue driving. Stopping immediately after crossing the line when the light turns red does not count as running a red light. Determination of crossing the stop line when the light turns red: If the vehicle crosses the stop line by a short distance without obstructing pedestrians or other vehicles, it is considered crossing the stop line but not running a red light. If the vehicle crosses the stop line by a long distance, obstructing pedestrians or other vehicles, it will be considered running a red light. Traffic light driving instructions: When the light is red, vehicles are prohibited from passing; when the light is yellow, vehicles that have already crossed the stop line can continue to pass; when the light is green, vehicles are allowed to pass, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. Precautions when passing through traffic lights: Drive according to the green and red light signals; do not run a red light or violate traffic rules. Even when driving according to the light signals, look left and right, as there may be people who do not follow the rules. When the light is red, wait in the designated waiting area and avoid the turning lanes for motor vehicles. Do not rush when passing through traffic lights to avoid collisions due to crowding. Pass through quickly within the specified time; when the light turns red, do not take chances—prepare to stop immediately when the light turns red.
6
4
Share

What is the fuel consumption of the Audi Q7?

Audi Q7 fuel consumption is 12.7L/100km. Methods to determine vehicle fuel consumption: Fuel consumption ÷ mileage × 100 = L/100KM. The numbers before 1.6T and 1.8T represent the engine displacement, which is the sum of the volumes of all cylinders. Larger displacement means greater power and higher fuel consumption. Factors affecting vehicle fuel consumption: The fuel consumption of a car is not only related to the vehicle itself but also to the driver's driving habits and road conditions. If the driving habits are poor and the car is frequently driven on congested roads, the fuel consumption will inevitably be relatively high.
3
3
Share

What brand is miniauto?

MINI is a brand under BMW. BMW acquired MINI in 1994. Positioning of MINI: Mini is a car brand originally launched by the British Motor Corporation and later owned by BMW. It is a globally popular, highly distinctive small hatchback. First introduced by the British Motor Corporation (BMC) on August 26, 1959, Mini has achieved tremendous success over its more than half a century of history. Powertrain of MINI: BMW MINI is equipped with 1.6L naturally aspirated and 1.6L turbocharged engines, both of which require gasoline with an octane rating of 95 or higher. The maximum horsepower reaches 120 and 184 HP respectively. The 1.6L naturally aspirated engine delivers a maximum output power of 90 kW and produces a peak torque of 160 Nm.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.