What should drivers do when driving through waterlogged roads?

1 Answers
JaxsonAnn
07/25/25 1:10am
Drivers should pay special attention to slowing down and driving cautiously when passing through waterlogged roads to ensure safety. Here are the precautions to take when driving through waterlogged roads: 1. Slow down and maintain a steady speed: When passing through waterlogged roads, it is essential to slow down and maintain a steady speed. This can help avoid various dangerous situations caused by the slippery conditions of waterlogged roads to a certain extent. 2. Beware of "hydroplaning": When driving at high speeds, water between the tires and the road surface cannot be displaced, leading to a loss of friction between the vehicle's weight and the road surface. The likelihood of "hydroplaning" increases, so reducing speed is necessary to prevent its occurrence. 3. Do not restart the engine if it stalls: If the engine stalls due to water ingress, attempting to restart it immediately can cause significant damage to the engine.
Was this review help?
6
2
Share
More Forum Discussions

Where is the jack placement location for the Mercedes-Benz B200?

The jack placement location for the Mercedes-Benz B200 is under the trunk partition board. Car jack placement location: The car jack is placed inside the car's toolbox and is used to lift the vehicle body when changing a spare tire. Car jacks include pneumatic jacks, electric jacks, hydraulic jacks, and mechanical jacks, with hydraulic and mechanical jacks being the most commonly used. Car jacks are used for changing spare tires, making it convenient to replace a flat tire when driving outdoors. Precautions for using a car jack: When the vehicle is lifted by the jack, never start the engine, as the vibration of the engine or the rotation of the wheels can cause the vehicle to slip off the jack, creating a hazard. For safety reasons, different car models generally have fixed positions for using the jack. Do not use the jack to support the bumper, crossbeam, or other parts.
16
1
Share

What are the reasons for the engine warning light to come on?

There are mainly 7 reasons for the engine warning light to come on: Sensor malfunction: The sensors mentioned here include coolant temperature, crankshaft position, air flow, intake air temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or signal interruption occurs, the car's ECU cannot accurately obtain engine data, which will cause the engine warning light to come on. Fuel quality issues: If fuel and engine oil are not added according to the manufacturer's requirements, it may cause engine wear and trigger the warning light. Poor combustion of air-fuel mixture: Poor combustion can lead to engine carbon deposits or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a warning. Spark plug failure, ignition coil failure, fuel pump failure, and fuel line blockage can all cause poor combustion of the air-fuel mixture. Turbocharging issues: The intake boost pipe or turbocharger can also cause the engine warning light to come on. The most common issue is turbocharger damage, accompanied by symptoms such as oil leakage, high oil consumption, reduced power, metal noise, and blue or black smoke from the exhaust pipe. Intake issues: If there is a problem with the car's intake system, it may cause engine pipe blockage, and in severe cases, trigger the engine warning light. A dirty air filter that is not cleaned regularly can lead to intake problems. Exhaust issues: Exhaust system faults can also cause the engine warning light to come on. The rear oxygen sensor, catalytic converter, exhaust camshaft, and bearing failure are all causes of exhaust problems, with the catalytic converter being the most common. Using leaded gasoline, lead or silicon-based lubricant additives, physical damage to the catalytic converter, or fuel system faults can easily cause catalytic converter failure. Anti-theft system malfunction: If the car's electronic anti-theft system malfunctions or the anti-theft controller does not match the engine electronic controller, the anti-theft system can prevent the engine from operating normally, and the engine warning light will come on. If the engine warning light comes on, you can follow these steps: First, check if the engine is running normally and whether there are issues like shaking or black smoke. If so, avoid restarting the engine. Note: Do not restart the engine if the red warning light is on. If the engine can start, turn it off for 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'ON' position without pressing the clutch. The car will enter self-check mode after powering on. Wait for 5-10 seconds and observe if the warning light on the dashboard turns off. If the warning light remains on, visit a service station as soon as possible. The service station can use a portable diagnostic tool to read the fault code, obtain fault information, and perform targeted repairs.
19
5
Share

Why Aren't Motorcycles Automatic Transmission?

Because motorcycles have transmission methods that are more suitable for their own needs. Acceleration and Power: Continuously variable transmissions (CVT) provide smoother power output, but under the same displacement, their acceleration and power are inferior to models with gears, which is why most cross-type motorcycles are geared. Higher Fuel Consumption: Traditional transmissions rely on mechanical gear transfer, albeit with the addition of a clutch and several electromagnetic controllers, sensors, ECUs, etc. In contrast, automatic transmissions rely on hydraulic torque converter transmission, which has lower transmission efficiency, higher fuel consumption, and greater weight. Characteristics: Scooters primarily emphasize practicality and comfort, whereas cross-type motorcycles often highlight a sense of control.
12
4
Share

What is the difference between turning on AC and not turning on AC in summer?

In summer, the differences between turning on AC and not turning on AC are as follows: 1. Increased fuel consumption: The A/C button controls the car's air conditioning. When the button's light is on, it means the compressor is working, which increases fuel consumption, primarily for cooling and blowing cold air. 2. Reduced engine load: The engine bears a relatively smaller load when AC is off compared to when it is on. 3. Acceleration: The car's acceleration is relatively faster when AC is off. 4. Comfort level differs: When AC is on, the car interior is cooler and more comfortable, while when AC is off, it mainly blows natural air.
11
2
Share

What causes the noise when stepping on the brake of the 10th-generation Accord?

The reasons for abnormal noise when stepping on the brake of the 10th-generation Accord are as follows: 1. The braking speed is too slow: This abnormal noise is mainly caused by the braking speed being too slow when starting, which is a common issue for many automatic transmission car owners. 2. Corrosion of the brake disc and brake pads: This usually occurs after driving in the rain and then leaving the car unused for several days. The brake disc and brake pads rust and stick together, causing noise when starting to drive again. This can be resolved by applying butter or special lubricating oil to the connection between the brake pads and the brake calipers at a repair shop. 3. Material issues: Many brake pads nowadays are made of semi-metallic materials, containing a large number of metal fibers. Sometimes metal particles form, producing a harsh sound when stepping on or releasing the brake.
13
4
Share

Is Haojue Suzuki domestically produced or Japanese-made?

Haojue Suzuki is a Sino-Japanese joint venture vehicle. Below is relevant information about Suzuki: 1. Introduction to Suzuki: Founded in 1920, Suzuki is a Japanese automobile manufacturer. The "S" in the Suzuki logo stands for the first capital letter of "SUZUKI," conveying a sense of infinite power and symbolizing the unlimited development of Suzuki Motor Corporation. Suzuki provides high-quality products to customers worldwide and offers excellent service to users of Suzuki products. 2. Introduction to Suzuki China: In the Chinese market, Suzuki began providing technology to China for the first time in 1984. In 1993, it established Changan Suzuki as a joint venture with Changan Automobile, and in 1995, it established Changhe Suzuki as a joint venture with Changhe Automobile. With the strong support of Chinese partners, Suzuki produces and sells products developed by Suzuki.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.