What Should Beginner Drivers Pay Attention to When Driving on the Road?

1 Answers
Maureen
07/30/25 9:54am
Beginner drivers should pay attention to using turn signals, displaying the novice driver sign, maintaining a safe distance, etc. The specific precautions are as follows: Familiarize yourself with the route in advance: Before hitting the road, it's best for beginners to check the route to their destination. They should become familiar with the road conditions to avoid going in the wrong direction. Beginners who have just learned to drive must control their speed and avoid driving too fast, especially in crowded areas. They must stay alert and clearly distinguish between the brake and accelerator pedals. Learn to use the rearview mirrors: Using the rearview mirrors is crucial. Whether changing lanes or making turns, always check the mirrors for oncoming vehicles. Remember to use turn signals: Beginner drivers should also remember to use the appropriate turn signals when turning. Many beginners forget this, and the same applies when overtaking—always use the turn signal. Have an experienced driver accompany you: If your driving experience is limited, consider having an experienced driver accompany you. They can provide guidance from the passenger seat. Display the novice driver sign: Place the novice driver sign on the rear window of your car—it can be very helpful for beginners. Maintain a safe distance between vehicles: Beginner drivers often struggle to estimate the length and size of their vehicles. Therefore, it's advisable to keep a larger gap and distance between vehicles while driving to avoid rear-end collisions.
Was this review help?
19
5
Share
More Forum Discussions

What is the difference between single motor and dual motor in Model Y?

Model Y single motor version is rear-wheel drive, while the dual motor version is four-wheel drive. Relevant information is as follows: 1. Dimensions: Model Y is a mid-size SUV under Tesla, with a length, width, and height of 4750 millimeters (mm), 1921 millimeters (mm), and 1624 millimeters (mm) respectively, and a wheelbase of 2890 millimeters (mm). 2. Introduction: This model has both a long-range version and a high-performance version. Both the long-range version and the high-performance version are dual motor versions. The total power of the motor in the long-range version is 317 kW, with a total torque of 545 Nm. The total power of the motor in the high-performance version is 339 kW, with a total torque of 623 Nm.
12
0
Share

How many kilometers can five liters of fuel run?

55 liters of fuel can generally run about 700 kilometers. Relevant information is as follows: 1. Introduction: Gasoline possesses chemical energy. Gasoline is one of the most widely used light petroleum products and an important fuel for engines. Gasoline components can be divided into straight-run gasoline, thermal cracking gasoline, catalytic cracking gasoline, catalytic reforming gasoline, polymerization gasoline, hydrocracking gasoline, alkylation gasoline, and synthetic gasoline. 2. Classification: Gasoline products can be categorized into three main types based on their use: aviation gasoline, automotive gasoline, and solvent gasoline. The first two are primarily used as fuel for gasoline engines, widely employed in cars, motorcycles, speedboats, helicopters, and agricultural and forestry aircraft.
3
5
Share

How Many Types of Guideway Oil Are There?

The viscosity of guideway oil is primarily selected based on the load conditions. Generally, heavier loads require higher viscosity, while lighter loads require lower viscosity. Here are the specific details: 1. Types of guideway oil: There are 4 types of guideway oil, namely 32, 46, 68, 100, and 220. 2. Main functions: The viscosity of guideway oil is chosen according to sliding speed and average pressure. The viscosity of guideway oil is equivalent to the two types of guideway oils L-G68 and L-G150 (equivalent to the old grades 40 and 90) and the two guideway-hydraulic oils L-HG32 and L-HC68 (equivalent to the old grades 20 and 40) recommended in the international standard GB7632: Selection of Lubricants for Machine Tools. 3. Application scope: It can be used to lubricate screws, linear guideways, spindle boxes, translation screws, cylindrical and conical gears, and light-load worm gear transmission devices.
18
0
Share

What Causes the Noise from the Door Stopper?

The hinge axis of the car door and the rotation axis of the stopper are severely misaligned. Here are the detailed explanations: 1. Causes of noise from the door stopper: The function of the door opening limiter (Doorcheck) is to restrict the degree to which the door can open. It limits the maximum opening of the door, preventing it from opening too wide, and keeps the door open when needed, such as when the car is parked on a slope or in moderate wind, so the door does not close automatically. Common door opening limiters are separate strap-type limiters, while some limiters are integrated with the door hinge, typically providing limiting functions when the door is fully or partially open. 2. Precautions: Ensure that the friction surface of the limiter is lubricated. The misalignment issue between the door hinge axis and the stopper rotation axis can also be resolved through adjustment, but this requires higher technical skills and is often solved based on experience. Therefore, it is best to ensure this during the design and manufacturing process, and positioning aids should be used during installation.
7
2
Share

What is the diameter of an 18-inch tire in centimeters?

The exact measurement depends on the tire's height, as the overall diameter is a combination of factors. The effective outer diameter of an 18-inch tire is: 18*2.54=45.72CM. For example, if the tire is 225/40R18, its estimated outer diameter would be: 18*2.54+22.5*0.4*2=63.72cm, with the actual diameter typically falling between 60cm and 65cm. Advantages of 18-inch wheels: 1. Significant improvement in handling: Larger wheels have a greater contact area than original wheels, increasing friction and enhancing handling performance, second only to upgrading the suspension, providing better stability at high speeds. 2. Enhanced safety: In the event of a tire blowout, the diameter reduction of larger wheels is smaller than that of original wheels, making it easier to correct direction and significantly improving safety. 3. Visual impact: The visual appeal of larger wheels is undoubtedly remarkable.
7
1
Share

What is the Difference Between 18-inch and 20-inch Wheels?

For the same material and vehicle model, the main differences between 20-inch and 18-inch wheels lie in their size, cost and price, comfort level, fuel consumption, and safety stability. Below is a detailed explanation: Size Difference: The size of a wheel refers to the diameter of its outermost rim. One inch equals 2.54 centimeters, so an 18-inch wheel measures 45.72 centimeters, while a 20-inch wheel measures 50.8 centimeters—a difference of 5 centimeters. For smaller wheels, this difference may not have a significant impact, but for larger wheels, the effect is more noticeable. Cost and Price: Automotive wheels are produced in various ways, but most vehicles use 18-inch or smaller wheels. Due to higher production volumes, the cost per wheel is naturally lower. In contrast, 20-inch wheels are produced in smaller quantities, resulting in higher costs and prices. Comfort Difference: Larger wheels have thinner sidewalls and a larger contact surface with the road. As a result, they transmit more of the road's actual conditions to the vehicle body, leading to reduced comfort. In comparison, 18-inch wheels have a higher tire aspect ratio, providing better comfort. Fuel Consumption Difference: Larger wheels also lead to higher fuel consumption. This is because larger wheels require wider tires with thinner sidewalls, increasing the contact area with the road and, consequently, friction. As a result, fuel consumption rises. Safety and Stability Difference: Larger wheels do have advantages. They enhance the car's appearance, making it more eye-catching. Additionally, larger wheels mean a lower aspect ratio, improving driving safety and stability. In simpler terms, vehicles with larger wheels perform better in special conditions, such as turning, tire blowouts, or driving on slippery roads. Modifying wheels to an excessively large size can negatively impact vehicle handling, as well as reduce practicality, durability, and comfort. It may also lead to increased noise, bumpiness, slower acceleration, higher fuel consumption, and less durable tires prone to bulging. Whether a car needs high-end large wheels depends entirely on personal needs. While large wheels have advantages, they also come with significant drawbacks—bigger isn't always better. When modifying vehicle components, owners are advised not to alter the wheels without authorization, as this can affect the vehicle's annual inspection. Key factors affecting vehicle annual inspection include: Modifications to the vehicle's shape and overall dimensions, such as length, width, height, spoilers, or wheels. Use of non-compliant license plates, such as plates with peeling paint or defects, or detachable license plates. Use of non-compliant lighting. Unauthorized painting or altering of the vehicle's original color. Unauthorized changes to the vehicle's emblem.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.