What Should Be Replaced During the Second Car Maintenance?

Does the BYD Qin Plus DM-i come with a charging station?

The premium version of the Qin Plus DM-i with a 120 km range comes with a free charging station. The BYD Qin Plus DM-i can be charged in the following ways: Using the included 16A 3.3KW home charging station: When purchasing the car, some 4S stores may also provide a 16A 3.3KW home charging station. The actual charging power of the Qin Plus DM-i ranges between 2.6KW and 3.2KW. Purchasing and using a 16A 3.3KW portable charger: The Prundo brand offers a 16A 3.3KW portable charger. Simply plug it into a 220V 16A home air conditioning socket for charging, with the same charging speed as a home charging station, which is twice as fast as the 1.5KW portable charger included with the car.

20

5

Share

What is the 0-100km/h acceleration time of the BYD Yuan Pro?

BYD Yuan Pro's 0-100km/h acceleration time is 9.82 seconds. Below is an introduction to the BYD Yuan Pro: Exterior: To cater to the needs of female consumers, the Yuan Pro adopts a brand-new styling design. Body dimensions: The Yuan Pro measures 4375mm in length, 1785mm in width, and 1680mm in height, with a wheelbase of 2535mm. Compared to the Yuan EV, the length has increased by 15mm, and the rear adopts a traditional taillight style. Powertrain: The Yuan Pro is equipped with lithium iron phosphate Blade Battery across the entire lineup. The energy density of the Yuan Pro's Blade Battery is 140Wh/kg, with a maximum motor power of 136 horsepower and peak torque of 210 Nm. The comprehensive range is 401km.

20

5

Share

What Causes Difficulty in Engaging First Gear in a Manual Transmission?

Manual transmission first gear engagement difficulties are primarily caused by loose shift fork screws, wear between the positioning groove and positioning pin, deformed shift shaft, or incomplete clutch disengagement. Specific causes are as follows: Shift fork: Loose, severely worn, or even deformed. Loose screws securing the shift fork result in incomplete gear engagement. Severe wear on the shift fork prevents it from moving the gear, causing shifting difficulties. In this case, the damaged shift fork should be repaired or replaced, and the securing screws tightened. Wear between positioning groove and pin: Irregular stepped surfaces may cause jamming during shifting, preventing the positioning pin from sliding out of the groove, resulting in gear engagement failure or shifting difficulty. This should be repaired. Deformed shift shaft: Makes sliding gear movement difficult. The shift shaft should be repaired or replaced. Incomplete disengagement: Gears inside the transmission continue rotating during shifting, making gear changes difficult. Adjustment is required in this case.

4

0

Share

How much should a Tesla be charged?

It is not recommended to fully charge as it affects battery lifespan. Below are relevant details: Lithium-ion Batteries: During usage and idle periods, lithium-ion batteries continuously form/consume the SEI film, generating gases that assist anode film formation, leading to swelling (bulging) phenomena; excessive activity of internal lithium-ion battery crystals causes swelling (bulging), typically due to overcharging, over-discharging, excessive charging current, or prolonged storage at full charge. Energy Recovery: When the driver releases the accelerator pedal, the vehicle control unit determines whether to engage regenerative braking at any given moment based on the brake pedal's opening, vehicle driving status, and power battery condition. For instance, regenerative braking is disabled if the power battery temperature is too low, and the extent of regenerative braking is determined by the remaining battery charge. If the power battery has ample charge—such as above 90% or 95%—regenerative braking is not activated.

14

5

Share

Is the brake on the left or right side of a car?

In a manual transmission car, the right pedal is the accelerator, and the middle one is the brake. Here is a detailed introduction to manual transmission cars: Pedal arrangement: From left to right, they are the clutch pedal, brake pedal, and accelerator pedal. Do not rest your left foot on the pedal: During long drives, both feet can become very tired, leading to unintentional pressing. If the left foot is on the brake pedal at this time and presses down, it can easily cause an accident and pose a danger. Most people are right-handed, and the right foot has a faster reaction time. In case of an emergency, the right foot can react in the shortest time, lifting off the accelerator and pressing the brake pedal. If the left foot is on the brake pedal, the right foot will be suspended during braking, making it easy to press both pedals simultaneously, which is dangerous.

20

5

Share

What are the symbols for car headlights and low beams?

Car headlights include high beams and low beams. The symbol for high beams is parallel horizontal lines, while the symbol for low beams is a downward-slanting line. Both high beams and low beams are used to illuminate the road ahead of the vehicle. The differences between low beams and high beams are: 1. Light intensity varies: Low beams are positioned outside the focal point, emitting divergent light that covers a larger area at close range; high beams are positioned at the focal point, emitting parallel light with higher brightness, capable of illuminating distant and high objects. 2. Illumination distance differs: Low beams are designed for short-distance lighting with a fixed focus, while high beams are intended for long-distance lighting with greater brightness and range. 3. Usage scenarios differ: Low beams are used when driving on urban roads, where lighting conditions are generally adequate, as using high beams can easily dazzle oncoming vehicles and cause accidents; high beams can be used on highways or in rural areas without streetlights to expand the field of vision. While driving, you should immediately switch from high beams to low beams under the following circumstances: 1. When an oncoming vehicle approaches; 2. When the distance to the vehicle ahead in the same direction is relatively close; 3. When the road is already sufficiently illuminated; 4. When entering busy streets with heavy traffic.

3

4

Share

What Should Be Replaced During the Second Car Maintenance?

Does the BYD Qin Plus DM-i come with a charging station?

What is the 0-100km/h acceleration time of the BYD Yuan Pro?

What Causes Difficulty in Engaging First Gear in a Manual Transmission?

How much should a Tesla be charged?

Is the brake on the left or right side of a car?

What are the symbols for car headlights and low beams?

What Causes Water Dripping Under the Car in Summer?

What Does a Ferrari Look Like?

Is the Jiangling Ford Lingyu a Joint Venture Vehicle?

Can I drive on the highway without installing ETC?