What should be paid attention to when taking the third driving test in the rain?

1 Answers
Jack
07/29/25 1:00pm
When taking the third driving test in the rain, due to the harsh environment, there are many things that need attention. The following are the matters that need attention when taking the third driving test in the rain: 1. Control the speed: When driving in the rain, you should control the speed, which should be slower than usual during training. During the third driving test in the rain, the examiner will also be concerned about driving safety, so safety comes first and the test comes second. 2. Open the window for ventilation: Because the light is already dim on rainy days, if the car window is closed too tightly during the driving test, the car is prone to fogging up, which will affect the vision and lead to misjudgment.
Was this review help?
19
0
Share
More Forum Discussions

What are the symptoms of a clogged carburetor?

The following phenomena may occur if the car's fuel filter is clogged: 1. Jerking phenomenon: A clogged fuel filter, which is a type of fuel line blockage, can lead to poor fuel supply, causing issues with gasoline atomization and resulting in an imbalanced air-fuel mixture. This incomplete combustion of the mixture can easily cause jerking. While driving, the jerking may not be noticeable or may be mild on flat roads but becomes more pronounced when going uphill. 2. Engine shaking at idle: If the fuel filter is clogged, the engine's fuel supply becomes irregular, and the fuel injector's atomization deteriorates, leading to engine shaking at idle. However, idle shaking isn't necessarily due to the fuel filter; a clogged throttle body can also cause idle shaking, so a comprehensive diagnosis is needed. 3. Poor acceleration and difficulty under load: Even a mildly clogged fuel filter can reduce engine power, resulting in sluggish acceleration, which is particularly noticeable when going uphill or under load.
12
3
Share

How to Remove the Speed Limiter on CFMOTO 650NK to Achieve Maximum Speed?

CFMOTO 650NK can reach a top speed of 180 kilometers per hour. Here is some extended information about the CFMOTO 650NK: 1. The CFMOTO 650NK is a sports motorcycle produced by CFMOTO, equipped with a 649.3cc twin-cylinder four-stroke engine. 2. This engine delivers a maximum power of 52kW and a maximum torque of 62 Nm, with the peak power achieved at 8,500 rpm and peak torque at 7,000 rpm. 3. The engine features electronic fuel injection technology and is equipped with an ABS anti-lock braking system. Below is some extended information about the ABS system: 1. The ABS system prevents wheel lock-up during emergency braking. 2. If the wheels lock up during emergency braking, the rider cannot slow down the motorcycle or control its trajectory, making the motorcycle more prone to falling. 3. ABS is crucial for motorcycles as it significantly enhances riding safety and stability.
6
2
Share

How to Turn on the Air Conditioning for Cooling in a Driving School Car?

To activate the air conditioning in a driving school car, you need to safely start the vehicle (ensure the gear is in P position and the handbrake is engaged), then press the "AC" button on the car's air conditioning system to turn on the cooling function. Below are some key points regarding the operation of the air conditioning in a driving school car: 1. Precautions: Beginners must ensure the vehicle is safely parked in a secure area when adjusting the air conditioning. 2. Risks: Using the air conditioning in low gear directly affects the vehicle's power. During the Subject 2 driving test, precise and stable completion of the test items relies on controlling the clutch and brake at low speeds. When the car is in low gear, the engine's output power is relatively low. Practicing driving with the air conditioning on can affect the habit of clutch control. Using the air conditioning in low gear or at idle speed may lead to incomplete fuel combustion, resulting in an increase in carbon monoxide concentration.
2
0
Share

What effects will a motorcycle clutch being too loose or too tight have on the vehicle?

If it's too loose, gear shifting will be jerky, and the engine may even stall. If it's too tight, the clutch becomes overly sensitive and harder to operate; if excessively tight, it can easily slip and result in insufficient power. Below is relevant information about the clutch: Introduction: The clutch refers to the separation device between the car engine and the transmission, also known as the clutch. In automatic transmission vehicles, the clutch is integrated into the transmission, enabling automatic gear shifting. Function: As the name suggests, the clutch serves to separate and engage. It connects or disconnects the engine from the wheel transmission system. When the clutch is depressed, the engine's transmission system is disconnected from the wheels, preventing engine power from being transmitted to the wheels to drive the car. When the clutch is released, the engine's transmission system connects to the wheels, transmitting power to the wheels and allowing the vehicle to move.
14
0
Share

Why does the front radar beep when there is nothing in front?

The reasons why the front radar beeps when there is nothing in front are as follows: 1. Sensor hole position and location: The sensor hole is too small or too tight, or it is installed on an iron or hard protective bar. 2. Foreign objects on the surface: There are attachments such as paint, snow blocks, or ice blocks on the sensor surface. 3. Poor sensor characteristics, or the working environment temperature is too low. 4. Sensor failure. Here is some relevant information: 1. Reversing radar: The full name of the reversing radar is reversing anti-collision radar, also known as a parking assist device. It is a safety assist device for parking or reversing a car, consisting of ultrasonic sensors (commonly known as probes), controllers, and displays (or buzzers). 2. Function: It can inform the driver of the surrounding obstacles through sound or a more intuitive display, relieving the driver's troubles caused by looking around when parking, reversing, or starting the vehicle, and helping the driver eliminate blind spots and blurred vision defects, thereby improving driving safety.
13
1
Share

Remedial Measures for Driver's License Downgrade?

There are no remedial measures for a driver's license downgrade. After deducting 12 points from Class A or Class B motor vehicle driver's licenses, at the end of the scoring cycle, the license holder must participate in study and exams, and complete the downgrade procedure. There is no way to remedy this; the only option is to reapply for a higher-class license after the downgrade, following the required time frame. Relevant information about driver's licenses is as follows: 1. Introduction: The People's Republic of China Motor Vehicle Driver's License, referred to as a driver's license or 'driver's permit,' is a mandatory certification for motor vehicle drivers, established in accordance with the laws of the People's Republic of China. 2. Examination Content: The test subjects include traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving), totaling three items.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.