What should be paid attention to when taking a school bus?

2 Answers
OKylie
07/24/25 2:12am
Be sure to verify the operating qualifications of the school bus and do not take an unqualified school bus. During the ride, do not extend your hands or head out of the window, and avoid eating or drinking while on the school bus. When boarding or alighting, always wait until the school bus comes to a complete stop and queue in an orderly manner. If you feel unwell during the ride, immediately inform the teacher and the school bus driver, and seek medical attention promptly. Overloading the bus affects the stability of the vehicle, reduces braking performance, and seriously endangers driving safety. Traffic police reminder: School bus drivers and student transport vehicle drivers must strictly adhere to the approved passenger capacity and avoid overloading. Schools and parents are encouraged to actively cooperate with traffic police, supervise proactively, and educate students to consciously avoid overloaded vehicles. Regularly study traffic regulations. Maintain good vehicle condition, frequently check the vehicle's load status, and address any issues promptly. The driver's speed within the school premises should not exceed 5 kilometers per hour.
Was this review help?
19
4
Share
AddysonLee
08/10/25 9:51pm
As a student who frequently rides the school bus, I'd like to share some personal experiences. Every time while waiting, I stand in the safety zone one meter away from the roadside, ensuring the bus comes to a complete stop before queuing up to board—never running around or chasing after the moving vehicle. Once aboard, I make it a habit to find a seat and fasten the seatbelt; maintaining quietness during the ride to avoid distracting the driver or classmates, thus preventing accidents. When disembarking, I wait until the bus has fully stopped, check surrounding traffic for safety before stepping off. I remember once when a friend almost fell due to horseplay on the bus, which reinforced my understanding of the importance of rules. Additionally, arriving at the stop five minutes early with my backpack and card ready helps reduce chaos. The school bus is our daily transport, and adhering to these small details ensures the safety of both ourselves and others.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

What is the Principle of Flywheel Energy Storage?

Flywheel energy storage refers to an energy storage method that uses an electric motor to drive a flywheel to rotate at high speed, and then uses the flywheel to drive a generator to produce electricity when needed. The following is a related introduction to flywheel energy storage: Structural Composition: The flywheel energy storage system mainly consists of three parts: the rotor system, the bearing system, and the energy conversion system. Additionally, there are some supporting systems such as vacuum, cryogenic, housing, and control systems. Application Scope: It can be applied in electric vehicle batteries, battery-free magnetic levitation flywheel energy storage UPS, uninterruptible power supplies, uninterrupted power supply for wind power generation systems, high-power pulse discharge power supplies, etc.
1
4
Share

How to Adjust the Handbrake on a Cruze?

To adjust the handbrake on a Cruze, follow these steps: 1. Fully release the handbrake; 2. Remove the rear vent or center console; 3. Loosen the handbrake screw until there is no tension, then gradually tighten it until the handbrake makes 5 to 6 clicks when pulled up; 4. Test the adjustment on a slope. The Cruze generally refers to the Chevrolet Cruze, which is a compact car designed by General Motors to set benchmarks in design and performance. Its dimensions are 4666mm in length, 1807mm in width, 1460mm in height, with a wheelbase of 2700mm.
4
3
Share

Where is the fuel tank switch of Borgward cars?

The fuel tank cap switch of Borgward cars is located on the right side of the vehicle body. When the car is unlocked, the owner can press the fuel tank cap to open it. Borgward cars recommend using 95-octane gasoline, and the fuel gauge in the car will display the remaining fuel in the tank. Borgward cars offer a 1.4T hybrid system and a 1.8T gasoline engine. The 1.4T hybrid system's gasoline engine has a maximum power of 143 horsepower and a maximum torque of 240 Nm, while the electric motor has a maximum power of 116 horsepower and a maximum torque of 195 Nm. This powertrain is paired with a 7-speed dual-clutch transmission.
19
2
Share

Does a New Car Need Undercarriage Coating?

Whether a new car needs undercarriage coating can be chosen based on the road conditions it will be driven on. Below are relevant introductions about undercarriage coating: Functions of Undercarriage Coating: Undercarriage coating has several important functions. The first is anti-corrosion, the second is noise reduction, and the third is improving comfort. Most importantly, it prevents environmental factors from causing damage to the car's undercarriage due to flying stones. Precautions for Applying Undercarriage Coating: When applying undercarriage coating, ensure all exposed areas without rustproofing are fully covered. Avoid spraying high-temperature areas such as the exhaust pipe during application.
16
2
Share

What is the top speed of the Diamond Leopard 125?

The Diamond Leopard 125 motorcycle can reach a maximum speed of 100 kilometers per hour. Diamond Leopard 125 dimensions: The Diamond Leopard 125 is a motorcycle under the Haojue brand, with a length of 2045mm, width of 740mm, height of 1110mm, and a wheelbase of 127mm. It is equipped with a 125cc single-cylinder air-cooled engine. Motorcycle riding precautions: When riding a motorcycle, always wear a helmet and protective gear, and it is best to wear professional riding gear. Always ride in the motor vehicle lane, as motorcycles are classified as motor vehicles and should not enter non-motor vehicle lanes.
13
5
Share

Can You Drive with Abnormal Tire Pressure?

Tire pressure abnormality is not recommended for continued driving. Below are relevant introductions about tire pressure: Low Pressure: Low pressure increases tire body deformation, easily causing cracks on the tire side, while generating flexing motion, leading to excessive heat, promoting rubber aging, fatigue of the cord ply, and cord breakage. It also increases the tire's contact area, accelerating shoulder wear. High Pressure: High pressure causes excessive extension and deformation of the tire cords, reducing the tire body's elasticity, increasing the load on the car during driving. If impacted, it may cause internal cracks and blowouts. High pressure also accelerates tread wear and reduces puncture resistance.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.