What should be paid attention to when replacing tires?

[VanBrooke]

When replacing tires, the following points should be noted: 1. Choose the appropriate tires. The specifications of the tires must match the previous ones and must be the same as the other tire on the same axle; 2. Replace the valve stem when replacing the tire; 3. Follow the manufacturer's requirements for installation direction and inflation; 4. Install new tires on the rear axle of the vehicle; 5. Avoid sudden braking after replacing new tires; 6. Remove the screws diagonally when removing the tire. The method for replacing tires: 1. Use a pressure gauge to check the air pressure of the outer rear tire; 2. Place wheel chocks under the front wheels; 3. Use special tools to remove the spare tire; 4. Loosen the rear wheel lug nuts; 5. Use a jack to lift the rear wheel at the designated position on the rear axle; 6. Remove the lug nuts in order and then remove the tire; 7. When installing the spare tire, align the ventilation holes of the two wheel rims, arrange the valve stems symmetrically, and separate them by 180 degrees; 8. Tighten the lug nuts in a diagonal sequence to ensure the conical end of the nut closely fits the conical end of the bolt hole; 9. After removing the jack, tighten the lug nuts again to increase the tightness.