What should be paid attention to when refueling?

2 Answers
Perry
07/25/25 6:19am
When refueling, the following points should be noted: (1) Do not overfill the tank; (2) Try to avoid refueling only when the fuel warning light comes on; (3) Choose the right time to refuel. Here is some relevant information about car refueling: 1. Refueling time: When the yellow warning light comes on, there is still some fuel left in the tank. Generally, you should refuel at this time, but it is best to refuel before the yellow light comes on. Many manuals remind that refueling should be done when the pointer is at a quarter of the fuel gauge, which is for the protection of the fuel pump. 2. Safe fuel tank: The accuracy of the refueling amount cannot be judged based on the rated capacity of the fuel tank. A car fuel tank is a container, not a measuring instrument, and cannot be used as a basis for judging measurement accuracy. According to the requirements of relevant national mandatory standards, the rated capacity of a car fuel tank should be controlled at 95% of the maximum safe capacity of the fuel tank.
Was this review help?
4
5
Share
DeDominic
08/10/25 6:08pm
Having driven for over twenty years, safety is always my top priority when refueling, a point I constantly remind myself of. Before refueling, the engine must be turned off without any negligence; gasoline vapor is extremely flammable, and even a phone ringing or a cigarette butt could trigger an explosion. After getting out of the car, I touch the car body to discharge static electricity, especially in winter when wearing synthetic clothes—this habit once saved me from a potential accident. The fuel nozzle must be inserted firmly, halfway in to ensure a seal, and don’t refuel too quickly to avoid splashing. If any fuel spills on the ground, call the staff immediately and don’t handle it yourself. Never leave children alone in the car while refueling—it’s very dangerous; choose less busy times to refuel to minimize risks. The gas station should have good ventilation, and if you smell anything unusual, leave immediately. Keeping these points in mind ensures safety, as refueling is an unavoidable part of driving life—being careful never hurts.
Was this review help?
10
1
Share
Expand All
More Forum Discussions

Why Can't the Front Door of Baojun 730 Be Opened?

Baojun 730 front door cannot be opened for the following reasons: Child lock is engaged: When closing the door, always check if the child lock is disengaged. If the door cannot be opened, use a flathead screwdriver to turn the child lock to the off position. Lock cable failure: When this occurs, the door cannot be opened from inside the vehicle because the malfunctioning cable directly affects the lock mechanism's operation. Hinge lock post deformation: If the door is subjected to external force, it may cause deformation of the door hinge and lock post, which is another reason the door cannot be opened. Door limiter malfunction: When this issue arises, opening the door becomes extremely difficult or impossible. The solution is to replace the door limiter with a new one to restore smooth door operation.
6
1
Share

Why does the Nissan Tiida experience jerking during startup?

Nissan Tiida's jerking during startup may be caused by factors such as automatic transmission throttle acceleration upshifting, damaged solenoid valves, or high transmission temperature. The details are as follows: Automatic transmission throttle acceleration upshifting causing jerking: Jerking during startup in an automatic transmission car is a normal phenomenon. If you want to accelerate sharply while driving, you need to press the throttle deeply. At this time, the automatic transmission will automatically downshift to increase the engine speed. When the speed reaches a certain level, it will upshift. After upshifting, the speed will drop significantly, resulting in a relatively noticeable jerking sensation. Damaged solenoid valves: Damaged solenoid valves are an important cause of jerking. The sensation of jerking is like being kicked in the backside. Jerking can be occasional or occur at fixed intervals. The distinction is simple: occasional jerking happens without any pattern, while fixed jerking occurs at a certain speed or during a specific gear shift (e.g., from 2nd to 3rd gear) or at a fixed speed. High transmission temperature: High transmission temperature can degrade the quality and friction characteristics of the automatic transmission fluid, increasing friction and wear, which leads to transmission noise. At the same time, sludge (impurities or dirt) can form inside the transmission (e.g., in the valve body), causing the transmission to jerk or experience impacts.
18
2
Share

How long is the Baojun 310's full vehicle warranty?

Baojun 310 offers a full vehicle warranty of 3 years or 80,000 kilometers. Introduction to vehicle warranty: The vehicle warranty period, also known as the quality guarantee period, is typically defined by two conditions set by the manufacturer: time and mileage, whichever comes first. During the warranty period, if the vehicle is used under specified conditions and experiences any malfunctions or part failures (loss of functionality) due to manufacturing, assembly, or material quality issues, the manufacturer will provide free repairs or replacement of corresponding parts upon inspection and confirmation by an authorized service station. Warranty as a selling point: Many automakers now extend the mileage limit of their warranties to promote their vehicles' quality, with most offering a 3-year or 100,000-kilometer warranty to reassure consumers. However, only the mileage is extended, not the duration, which benefits few owners since most household vehicles travel about 20,000 kilometers annually or even less.
15
5
Share

Why can't the light on the roof of the Volkswagen Lavida's cabin be turned off?

The reason why the light on the roof of the Volkswagen Lavida's cabin cannot be turned off is that the constant-on mode is activated. Modes of the interior dome light: Generally, there will be buttons next to the interior dome light, which usually have three modes: ON (constant-on mode), DOOR (lights on when the door is open and off when the door is closed), and OFF (off mode). When the button is set to DOOR, the light will automatically turn on when the door is opened and turn off when the door is closed. Switch for the interior dome light: Generally, the interior dome light not only has a mode selection switch but also a separate switch. Some cars' interior dome lights can be pressed down to turn on or off, a feature that many car owners are unaware of. You can try it to see if your car has this function.
7
4
Share

Where is the washer fluid filler port of the Baojun 510?

The washer fluid filler port of the Baojun 510 is a white cap located in the lower right corner of the engine compartment. Baojun 510 washer fluid level: Open the front hood of the engine, then fill the washer fluid to the level between the upper and lower marked lines on the reservoir. Functions of Baojun 510 washer fluid: Cleaning performance: The windshield washer fluid is formulated with multiple surfactants and additives. Surfactants typically have functions such as wetting, penetration, and solubilization, thereby achieving cleaning and dirt removal effects. Antifreeze performance: The presence of alcohol and ethylene glycol significantly lowers the freezing point of the liquid, providing antifreeze effects and quickly dissolving frost. Anti-fog performance: A single-molecule protective layer forms on the glass surface, preventing the formation of fog droplets and ensuring clear visibility through the windshield. Anti-static performance: After cleaning with the washer fluid, substances adsorbed on the glass surface eliminate static charges on the glass.
3
2
Share

Where is the seat belt trigger device of the new Santana located?

The seat belt trigger device of the new Santana is located in front of the gear lever or underneath it. Function of car seat belts: Car seat belts are the primary safety devices that ensure the safety of adult passengers. In the event of an accidental collision or sudden braking, a significant impact force is generated, which can cause the driver or passengers to collide with objects inside the car, such as the steering wheel or windshield, resulting in serious injuries. Seat belts secure the occupants to the car seats, significantly reducing the displacement distance and minimizing the injuries sustained. Precautions for wearing seat belts: When fastening the seat belt, first adjust the shoulder strap of the three-point seat belt to the middle of the shoulder. The lap belt should be fastened as low as possible, ideally at the hip area below the waist. Ensure that the belt is not twisted, as twisting can greatly reduce the belt's load-bearing capacity and compromise its safety performance. Insert the belt into the buckle until you hear a "click" sound, indicating that it is securely fastened.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.