What should be paid attention to when driving on the highway for the first time?

3 Answers
Layla
07/29/25 8:55am
Regarding the precautions for novices driving on the highway, the following points should be noted: 1. Pay attention to speed: Novices should remember not to drive too fast, especially when turning, it's best to slow down in advance to avoid sudden situations. 2. Pay attention to observation: When turning, remember to check the rearview mirror in advance to see if the vehicle behind is about to overtake, and remember to change lanes in advance when turning to avoid finding yourself not in the turning lane when it's time to turn. 3. Operate properly: When turning the steering wheel, do not turn it too early, as it may cause the car body to fail to turn or run over the curb. Also, do not turn it too late, as the front of the car may deviate too much from the lane.
Was this review help?
4
0
Share
OmarLee
08/12/25 7:31am
It's my first time driving on the highway, so I must emphasize safety first. Before setting off, I need to check the vehicle: tire pressure should be maintained within the manufacturer's recommended range, as underinflation can easily lead to blowouts; engine oil and coolant should be at sufficient levels to prevent engine overheating; lights such as headlights and taillights must be functioning properly to ensure safe nighttime driving. On the highway, speeds are high, so maintain a safe distance of at least three seconds—choose a fixed point, count three seconds after the car in front passes it before you pass it; when changing lanes, signal early and check the mirrors and blind spots. Don’t speed or drive too slowly to obstruct traffic, just keep it between 90-110 km/h. In bad weather, like rain or fog, slow down and use fog lights and hazard lights; if you're tired, take a 20-minute break at a service area—don’t push yourself. In case of an accident, stop in the emergency lane, place warning signs far away, and seek help immediately. With more practice, you’ll get the hang of it.
Was this review help?
5
4
Share
Expand All
VanMadeline
10/06/25 2:30am
I just got my driver's license and immediately hit the highway, feeling a bit nervous. Don't panic too much, take deep breaths and relax. Before heading out, check that your tire pressure is normal, fill up the gas tank, and bring some water and snacks in case you get hungry. On the highway, stay focused on the road, obey the speed limit, avoid sudden braking or unnecessary lane changes; maintain a safe following distance, preferably over 150 meters for safety. When changing lanes, use your turn signals, check your blind spot by turning your head, and avoid jerking the steering wheel. Keep the music volume low to prevent distractions. Stop at rest areas every two hours to drink water and stretch your legs. Be extra cautious in rain or snow, driving in a lower gear and moving slowly. If you miss an exit, don't panic—just continue to the next one to avoid sudden turns. With more practice, it'll become second nature; just stay calm and confident.
Was this review help?
3
0
Share
Expand All
More Forum Discussions

Where is the B-pillar located on a car body?

The B-pillar of a car body is the pillar located between the front door and the rear door; the A-pillar is the pillar located between the windshield and the left front door. Both the A-pillar and B-pillar are main components supporting the structural strength of the vehicle. In the upper part of the front and rear doors of the cockpit, there is a piece of car glass each, and the pillar between these two pieces of glass is the B-pillar. Generally, the B-pillar is vertical, and some additional parts, such as the front seat belts, are installed inside the B-pillar. Therefore, to better achieve force transmission, the B-pillar often bulges outward. Hence, the challenge with the B-pillar is to achieve a balance between stiffness and weight. If viewed from inside the cabin, the position of the front seat belts is where the B-pillar is located.
6
1
Share

Should a 125cc scooter use 92 or 95 octane fuel?

For a 125cc scooter, both 92 and 95 octane fuel are suitable. Reference for motorcycle fuel grade selection: For many small and medium-sized motorcycles, 92 octane fuel is commonly used. However, using 95 octane fuel can provide better acceleration performance. Compared with 92 octane fuel, it offers faster power response and causes less engine vibration. The difference between 92 and 95 octane fuel lies in their iso-octane content. Higher-grade gasoline has better anti-knock performance. 95 octane fuel is purer than 92 octane, releasing more kinetic energy during combustion in the engine. Therefore, higher-grade fuel demonstrates better fuel efficiency and longer range in terms of power delivery. Motorcycle refueling precautions: For motorcycles below 150CC, the engine oil capacity is mostly less than one liter. Never overfill the engine oil - the correct amount should be checked using the oil dipstick or observation window. Overfilling engine oil may cause engine overheating, oil leakage. Never fill the engine oil to maximum capacity. Do not arbitrarily switch fuel grades. If you switch to a lower grade fuel, it may cause premature combustion and engine knocking.
20
0
Share

What are the penalties for driving a vehicle with an expired temporary license plate?

If a vehicle is driven on the road with an expired temporary license plate, it is equivalent to "driving a motor vehicle on the road without displaying a motor vehicle license plate." The specific relevant details are as follows: 1. According to the "Road Traffic Safety Law," if a motor vehicle is driven on the road without displaying a license plate, the traffic management department of the public security organ shall detain the vehicle, notify the party to provide the corresponding license plate, and impose a fine of 200 yuan and deduct 12 points in accordance with Article 90. 2. The traffic management department reminds: Currently, the validity period of the temporary license plates issued for motor vehicles is 15 days. Drivers must pay attention to the expiration date marked on the back of the temporary license plate and avoid driving with an expired temporary license plate. The following are the solutions for an expired temporary license plate: 1. Continue to apply for a temporary license plate: A temporary license plate can be extended up to three times. 2. Use a formal license plate: This is possible only if a formal license plate has already been obtained. 3. Use a fourth temporary license plate: This is also a widely used method. If all three temporary license plates in the local area have expired, one can apply for a temporary license plate from another province or city.
7
4
Share

What does a light bulb-shaped warning light mean?

A warning light resembling a light bulb with an exclamation mark inside indicates a malfunction in the vehicle's lighting system. When this indicator illuminates, it signifies that an exterior bulb has failed. This could include issues such as a damaged brake light, or less noticeable lights like the license plate light, width marker light, or reverse light. Additionally, the light may also activate due to poor electrical connections in the lighting system. Below is relevant information about warning lights: Location of warning lights in the vehicle: Warning lights are typically located on the dashboard within the driver's compartment. Function of warning lights: Their purpose is to alert the driver when a system malfunction occurs during normal vehicle operation, prompting attention and repair at a designated service station. Types of warning lights: Engine warning light, airbag system warning light, ABS system warning light, and transmission control system warning light. Structural principle of warning lights: Composed of bulbs, self-diagnostic systems, and fault circuits, they can promptly identify the location of a malfunction when a system failure occurs, causing the warning light to illuminate.
8
3
Share

Can I appeal if I couldn't stop when the traffic light turned from green directly to red?

If you couldn't stop in time and ran through the intersection when the traffic light changed directly from green to red without a yellow light, you can apply for an appeal. According to the Road Traffic Safety Law, traffic signals must consist of red, yellow, and green lights. Red means stop, green means go, and yellow serves as a warning. Therefore, if you disagree with the traffic police's penalty, you can file an appeal. The decision depends on whether there was a yellow light: First scenario: If the traffic light had a yellow light but you failed to notice it flashing, or if the yellow light wasn't very visible during the day, you cannot appeal. These situations are not caused by the absence of a yellow light, so any appeal would likely be denied. Second scenario: If the traffic light had no yellow light—possibly due to a malfunction, obstruction, or other reasons that made it impossible to see the signal—and you were penalized for running a red light, you can appeal to the traffic police department. In such cases, the appeal is usually successful. Moreover, if the traffic light was indeed faulty, the traffic police department may already be aware of the issue and might not impose a penalty.
12
1
Share

What is the best fire extinguisher for cars?

According to national regulations, the minimum filling capacity of vehicle fire extinguishers is one kilogram. As car owners, when purchasing vehicle fire extinguishers, it is sufficient to choose those with a capacity of 1-3 kilograms. Additionally, due to the less-than-ideal storage conditions for fire extinguishers in vehicles, it is advisable to opt for dry powder fire extinguishers or water-based fire extinguishers. Below are the relevant explanations: 1. How to choose: Generally, car fires are caused by electrical faults or fuel leaks. For electrical fires, water-based mist fire extinguishers are more suitable; for fuel fires, water-based foam fire extinguishers are better. Dry powder fire extinguishers, on the other hand, have good versatility and a wide range of applications, making them suitable for both types of fires mentioned above. 2. Usage specifications for dry powder fire extinguishers: (1) Before use, the fire extinguisher should be thoroughly inverted and shaken several times to ensure the dry powder inside is loosened. (2) Pull out the safety pin and hold the nozzle with your hand (if it is a tubeless fire extinguisher, support the bottom of the bottle with your hand), then aim the nozzle at the base of the flame. (3) Press the handle of the fire extinguisher firmly, and the dry powder will be ejected from the nozzle.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.