···
Log in / Register

What should be paid attention to when driving on the highway for the first time?

4 Answers
RafaelAnn
07/24/25 9:58pm
For the first time driving on the highway, the following points should be noted: 1. Conduct a vehicle inspection in advance, focusing on fuel, engine oil, tire pressure, lights, etc., and plan the route. It is also advisable to have an experienced driver with at least 3 years of driving experience accompany you; 2. The minimum speed on the highway should not be less than 60 km/h, and the maximum speed should not exceed 120 km/h. Do not drive below the speed limit. Driving below the minimum speed limit on the highway will result in a 3-point penalty; 3. Follow road signs and drive correctly in the appropriate lane. If you need to overtake, always signal in advance, check the rearview mirror, and then move into the overtaking lane. After completing the overtaking, follow the same steps: signal in advance, check the rearview mirror, and then return to the driving lane; 4. Maintain a safe distance. For novice drivers, due to lack of driving experience, misjudgments are more likely to occur. Therefore, it is important to control the speed and keep a considerable distance from the vehicle ahead. If you follow too closely, you may not have enough time to brake in case of any sudden situation with the vehicle in front.
Was this review help?
9
2
Share
DiTravis
08/10/25 9:59am
I was really nervous driving on the highway for the first time, so I prepared a lot in advance: checking the tire pressure to the standard value, ensuring the brakes were responsive, and all the lights were working; at the highway entrance, I accelerated to match the traffic speed, such as 60-80 km/h, to avoid accidents caused by a large speed difference; while driving, I maintained a safe distance, at least the two-second rule, watching the car ahead and reacting promptly; I always used turn signals when changing lanes, checking the mirrors and blind spots before moving; I had navigation ready on my phone, with a stable mount to minimize distractions, and brought water and biscuits to prevent thirst and hunger; I stopped at a service area every two hours for a 10-minute break to avoid fatigue; in bad weather, I slowed down and drove with low beams for better visibility; I kept a calm mindset, didn’t chase speed, and felt more confident after arriving home safely.
Was this review help?
6
4
Share
Expand All
LeilaniDella
09/26/25 5:57am
Having driven for over 20 years, I habitually check key points on highways: inspect tire wear, adjust tire pressure to recommended values, test brake system response, and ensure sufficient engine oil and coolant; when entering the highway, accelerate to around 80 on the ramp before merging into the main lane—avoid hesitation to prevent rear-end collisions; while driving, maintain a 100-meter distance from vehicles ahead and behind, always use turn signals when changing lanes, check side mirrors first and then glance over your shoulder for blind spots; control your speed within the speed limit—avoid speeding or driving too slowly to block traffic; adhere to lane discipline, returning to the right lane after overtaking on the left; use cruise control for steady speed and fuel efficiency, set navigation reminders to avoid missing exits; in bad weather like rain or fog, turn on fog lights and reduce speed for safety; develop the habit of anticipating road conditions by looking ahead and adjusting early.
Was this review help?
3
3
Share
Expand All
AubreeMarie
11/09/25 8:01am
For a comfortable and safe family trip on the highway: Before departure, ensure children are securely fastened in their car seats and all adults buckle up; plan the route in advance using navigation to avoid getting lost and distractions; stock the car with water and snacks to prevent hunger and fussiness; drive smoothly with gradual acceleration and deceleration, avoiding sudden braking that could startle passengers; maintain a following distance of over 100 meters and change lanes slowly to prevent motion sickness; take a break every 1.5 hours to relax at service areas; adjust the air conditioning to keep the cabin temperature comfortable as weather changes; follow simple rules like no phone use to stay focused on driving, ensuring everyone arrives home safely.
Was this review help?
10
1
Share
Expand All
More Forum Discussions

Why does the newly replaced car door sound different from the original one?

Original parts and replacement parts are different, and the replacement cannot achieve the same effect as the factory. Below is more information about car door replacement: 1. Replacing the rear door shell: The door hinges need to be readjusted to ensure uniform gaps and alignment between the front and rear doors. If adjusted properly, it will not affect the vehicle. 2. Situations requiring door replacement: If a car is involved in a scraping accident that damages the door, the extent of the damage should be assessed to determine whether replacement is necessary. If the door only has scratches, paint chips, or minor dents, it can be repainted or repaired with sheet metal work without needing replacement. If the door is severely damaged with large dents or deformation, it is generally not recommended to repair it, and direct replacement is advised.
17
3
Share

What font is used on the vehicle license?

The font used on the vehicle license is Founder Song Three Simplified. Below is relevant information about the vehicle license: 1. Composition: The vehicle license consists of three parts - the license holder, the main page, and the supplementary page. The front of the main page contains the signed certificate core, while the back features the vehicle photo, all sealed in plastic. The supplementary page contains another signed certificate core. 2. Function: Possessing a 'Motor Vehicle License' is one of the prerequisites for a vehicle to be driven on the road. Driving without carrying the license is a violation. The 'Owner Name' field on the license isn't just about the name; the registered owner on the license is the legally recognized owner of the vehicle, with the right to legally use and dispose of this property. In case of traffic accidents or economic disputes, they are also the legally designated responsible party.
19
4
Share

What Causes the Engine to Stall When Shifting to Neutral While Driving?

Stalling when shifting to neutral while driving is primarily caused by excessive carbon buildup in components such as the throttle body, idle air control valve, intake valves, intake manifold, combustion chamber, spark plugs, and fuel injectors. Engine maintenance involves the following two key points: 1. Clean the air filter: The air filter is crucial for engine air intake during operation. If the air filter becomes clogged or accumulates excessive dust, it restricts airflow into the engine. This allows large amounts of dust to enter the cylinders, accelerating carbon deposit formation, leading to poor ignition, reduced power output, and consequently increased fuel consumption. 2. Remove throttle body sludge: Sludge forms due to carbon deposits from fuel combustion exhaust gases accumulating in the throttle body, along with impurities not filtered by the air filter. Excessive sludge creates air intake resistance, resulting in higher fuel consumption.
9
1
Share

The Difference Between Fast Charging and Slow Charging Ports for New Energy Vehicles

The difference between fast charging and slow charging ports for new energy vehicles lies in the charging speed and the type of charging pile interface. Below is relevant information about new energy vehicles: 1. Advantages: Compared to traditional fuel-powered vehicle technology, new energy vehicle technology effectively reduces emissions, improves fuel efficiency, lowers usage costs, and offers the benefits of smooth operation and low noise. However, new energy technology is still in the exploration and development stage, placing extremely high demands on current battery technology, precision mechanical and electronic control technologies, and related infrastructure. 2. Application Scope: New energy vehicle technology primarily reflects the upgraded national emission standards, including fuel cell vehicles, hybrid vehicles, hydrogen-powered vehicles, and solar-powered vehicles, mainly aimed at replacing petroleum resources and controlling emission pollution.
16
2
Share

What is the Volkswagen Particulate Filter Issue?

Volkswagen has experienced an issue where the particulate filter becomes clogged, leading to problems such as increased fuel consumption and reduced power output. However, the official solution to the particulate filter clogging problem has not yet been provided by Volkswagen. Below is relevant information: Three Possible Solutions: Drive more on highways; for example, when driving at 80 km/h, quickly accelerate to 120 km/h and then reduce back to 80 km/h, repeating this several times. This keeps the engine under high load, raising exhaust temperatures to oxidize and clear the particulate filter internally; Shift the vehicle into neutral and rev the engine to 3000–4000 RPM to increase exhaust temperature, thereby regenerating the particulate filter; avoid short-distance driving and traffic congestion to prevent clogging of the particulate filter. Particulate Filter: The Diesel Particulate Filter (DPF) is a ceramic filter installed in the exhaust system of diesel engines. Function: The particulate filter can reduce soot emissions from diesel engines by over 90%.
16
3
Share

What causes unstable idle speed fluctuations in the Teana?

Unstable engine idle speed refers to changes in the gas force within the cylinders, causing an imbalance in the power output of each cylinder. This results in inconsistent horizontal component forces during the power stroke of each piston, creating an unbalanced torque that tilts the engine laterally, thereby causing engine vibration. There are multiple potential causes: Air intake system: Possible causes include leaks or blockages in the intake system. Idle control components: dirty or leaking stepper motor or throttle valve body. Abnormal sensors for atmospheric pressure, temperature, throttle position, etc., leading to incorrect data. Fuel system: Possible causes include blockages or flow restrictions. Abnormal electric fuel pump or fuel filter clogged due to various reasons, causing delivery issues; faulty fuel injectors: quality defects, blockages from foreign objects, poor sealing, aging O-rings, and other malfunctions can all contribute. Abnormal rail pressure.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.