What should be paid attention to when driving on the highway?

2 Answers
DiLeah
07/28/25 11:11pm
Specific precautions when driving on the highway are as follows: 1. Check the vehicle condition before driving, including the appearance and air pressure of the tires, and test the brakes. 2. Always fasten seat belts on the highway, for both the driver and passengers in the front and back seats, and avoid placing loose objects in the car. 3. Novices should avoid driving on the highway during snowy, foggy, rainy days, or at night. 4. Before the trip, familiarize yourself with the entrances and exits to avoid last-minute searches. If you miss an exit, never reverse; instead, proceed to the next exit and then re-enter. 5. When entering a service area or exiting the highway, it's best to glance at the speedometer, as prolonged highway driving can distort your sense of speed. 6. Avoid having large trucks, especially container trucks, follow closely behind you, as their brakes are often less effective in emergencies. 7. When overtaking, increase your speed and avoid slowing down during the maneuver. After passing, accelerate to minimize the time spent side by side.
Was this review help?
10
3
Share
DeLeilani
08/12/25 3:36am
I prioritize driving safety on highways. Always fasten the seatbelt, maintain speed within limits - 120 km/h is already quite fast. Keep a safe distance from the vehicle ahead, at least 100 meters to prevent sudden braking. Fatigue driving is a big no-no; take breaks every two hours at service areas to stretch. Never get distracted by phones - full attention should be on steering. Exercise extra caution in bad weather: slow down on rainy slippery roads with hazard lights on; use fog lights in foggy conditions and avoid risks with poor visibility. Check mirrors and watch for blind spots when changing lanes. Plan routes in advance knowing rest stop locations for stress-free driving that keeps the whole family at ease. Remember safety first - at highway speeds, small mistakes can lead to major disasters.
Was this review help?
14
2
Share
Expand All
More Forum Discussions

Why is there abnormal noise when driving?

Driving with abnormal noise can be caused by the following reasons: 1. The engine temperature is too low. When the car is cold-started, the engine temperature is too low for it to work properly, which is a normal phenomenon. Just wait a while until the engine temperature rises to a normal level. 2. The car's three-way catalytic converter expands due to heat. If there is abnormal noise when the car is just started, but it disappears after a while, it is caused by the expansion of the three-way catalytic converter due to heat, which is also a normal phenomenon and does not need attention. 3. Transmission failure. The internal gears of the transmission rub against each other, causing abnormal noise. This situation is more complicated and requires professionals at a repair shop or 4S store to inspect it. 4. Wear of the engine belt or chain. Wear of the engine belt or chain causes friction when the vehicle is started or idling, resulting in abnormal noise. For safety reasons, it is recommended to directly replace the engine belt or chain.
13
4
Share

What is a Joint Venture Car?

Joint venture cars refer to projects established through collaboration between Chinese and foreign investors. Below is an introduction to the investment methods of joint venture cars: 1. The Chinese side provides land and factory usage rights, as well as capital. 2. Foreign investors contribute brands, technology, capital, and talent. Below is extended information on the differences between domestic cars and joint venture cars: 1. Price: Due to core technologies being held by foreign companies, joint venture cars are often more expensive. 2. Investment method: Domestic cars are designed and manufactured entirely by Chinese entities; joint venture cars involve Chinese parties providing land, factory usage rights, and capital, while foreign investors contribute brands, technology, etc., to jointly manufacture the vehicles. 3. Brand: Domestic cars are self-owned brands; joint venture cars are produced through Sino-foreign collaborations.
15
0
Share

Is it allowed to make a U-turn at a double solid yellow line?

U-turns are not allowed at double solid yellow lines. Double solid yellow lines indicate that overtaking and U-turns are prohibited for vehicles. Making a U-turn at a double yellow line will result in a 3-point penalty and a fine. Other situations where U-turns are prohibited include: U-turns are prohibited where there is a 'No U-turn' sign or 'No Left Turn' sign: If there is a sign prohibiting U-turns, then U-turns are not allowed at that intersection. The action of making a U-turn is an extension of a left turn, so if there is a sign prohibiting left turns at an intersection, U-turns are also prohibited there. U-turns are prohibited when there is no left-turn lane: Even if you are in the leftmost lane, if there is no sign permitting left turns, U-turns are not allowed. U-turns are prohibited in the second left-turn lane: When a vehicle is in the second left-turn lane, it cannot make a U-turn. In the absence of any signs, vehicles can only make U-turns in the innermost left-turn lane. U-turns are prohibited on highways: Making a U-turn by crossing the central divider on a highway is illegal and will result in a fine and a 12-point penalty. If you miss an exit on the highway, continue to the next exit to leave the highway, and never attempt an illegal U-turn.
4
2
Share

What to Do When the Wuling Zhiguang Car Key is Locked Inside the Vehicle?

Solutions for when the key is locked inside the car are as follows: 1. Spare key: When the main key is accidentally locked inside the car, try to retrieve the spare key. This is the simplest and least costly method. 2. Break the window: It is recommended to choose the front door window, as replacing it is easier, has less impact on the seal, and the price is acceptable. 3. Locksmith company: Contact a locksmith company to avoid damaging the vehicle itself. 4. Call 110: For safety reasons, it is advised to directly call the local 110 to seek police assistance in recommending a locksmith company, avoiding illegal locksmith companies with malicious intent.
19
1
Share

How to Replace the Battery in an Older Mercedes-Benz G63 AMG Key?

The back of the older Mercedes-Benz G63 AMG key has a button. Press this button and slide the back cover forward to open the key. The battery is located in the adjacent slot. Be sure to note the battery model for the key. Most Mercedes key batteries are model 3V CR2025. After opening the slot, remove the old battery and replace it with a new one. Here is more information about Mercedes keys: 1. Mercedes has used three generations of car keys over the past twenty years. The key design is not related to the vehicle model or series. For example, keys for C-Class, E-Class, and S-Class are essentially the same within the same era, and the battery replacement method is also similar. 2. For Mercedes keys from 2006 to 2013, first flip open the tab at the rear end of the key to remove the mechanical key. Insert the mechanical key into the slot where the tab was and apply slight pressure to pop open the back cover. Then remove the depleted old battery, replace it with a new one, and close the back cover.
15
2
Share

What does a steering wheel with an exclamation mark mean in a car?

An exclamation mark appearing on the steering wheel indicates the Electronic Power Steering (EPS) warning light, which should disappear immediately after the engine starts. The Electric Power Steering (EPS) system is a power steering system that directly relies on an electric motor to provide assistive torque. Compared to the traditional Hydraulic Power Steering (HPS) system, the EPS system offers many advantages. The EPS mainly consists of components such as a torque sensor, vehicle speed sensor, electric motor, reduction mechanism, and Electronic Control Unit (ECU). The Electric Power Steering system evolved from the traditional mechanical steering system. It utilizes power generated by an electric motor to assist the driver in steering operations. The system primarily consists of three major parts: signal sensing devices (including torque sensor, steering angle sensor, and vehicle speed sensor), steering assist mechanism (electric motor, clutch, reduction transmission mechanism), and electronic control device. The motor operates only when assistance is needed. When the driver manipulates the steering wheel, the torque and steering angle sensor generates corresponding voltage signals based on the input torque and steering angle. The vehicle speed sensor detects the speed signal, and the control unit issues commands to control the motor's operation based on the voltage and speed signals, thereby generating the required steering assistance.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.