···
Log in / Register

What should be paid attention to when driving in summer?

4 Answers
OSophie
07/24/25 12:51am

There are the following precautions for driving in summer: 1. Do not drive while fatigued. The long days, short nights, and high temperatures lead to high physical exertion, especially at noon when fatigue and drowsiness are common. Ensure sufficient sleep to maintain energy; 2. Choose and use sunglasses correctly. When selecting sunglasses, avoid those with overly dark lenses and opt for polarized sunglasses; 3. Do not drive in slippers; 4. Do not sleep in a closed car; 5. Prevent tire blowouts due to high temperatures. High temperatures can cause glare on asphalt roads, leading to irritability and lack of concentration while driving. Additionally, the unpredictable summer weather with frequent strong winds and heavy rain increases the likelihood of traffic accidents.

Was this review help?
17
3
Share
WillowLynn
08/10/25 8:21pm

In summer driving, I prioritize vehicle maintenance the most. When it's hot, the engine cooling system is most prone to problems. Before every trip, I check the coolant level and radiator condition to prevent overheating and cylinder burning. Tires are also crucial, as high temperatures can cause tire pressure to rise, even leading to blowouts, so I regularly check and adjust the tire pressure to the recommended value. Don't forget to clean the air conditioning system; accumulated dust and mold can easily cause odors or allergies, affecting health. For long trips, it's also essential to bring enough antifreeze and spare water for emergency use. Actually, developing these small habits in daily life can save a lot of trouble and money.

Was this review help?
15
2
Share
Expand All
Derrick
09/24/25 2:33am

Road safety is always the top priority, and I am particularly vigilant against fatigue driving in summer. Continuous driving in high temperatures can easily lead to drowsiness, so it's best to take a break every hour, drink some cool water to cool down. Setting the air conditioning too cold can actually make you feel groggy, so a moderate temperature is ideal. Applying dark window film can effectively block sunlight and heat, protecting the interior from sun damage. I also make it a habit to place a thermometer on the dashboard to monitor the hot air inside the car and avoid heatstroke. Don't forget to check the windshield wipers, as sudden heavy rain with poor visibility can be dangerous. Remember to slow down, as softened road surfaces reduce friction and increase the risk of skidding.

Was this review help?
6
5
Share
Expand All
SanPeter
11/07/25 4:45am

Handling emergencies is my forte. In summer, engine overheating is common. Once the temperature warning light comes on, immediately pull over, open the engine hood to dissipate heat, but do not pour water on it. Top up the coolant after it cools down. Check the spare tire for proper pressure and integrity. In case of a flat tire, avoid slamming the brakes; instead, slow down steadily and change the tire safely. Air conditioning failures can be frustrating. First, check if the air filter is dirty or clogged, and clean or replace it if necessary to prevent further damage. Always keep emergency tools like a fire extinguisher and first aid kit in the car to handle electrical fires or burns, and avoid touching high-temperature metal parts. Calling for towing service promptly is often the wiser choice.

Was this review help?
10
0
Share
Expand All
More Forum Discussions

Can the Electronic Parking Brake Be Used for Emergency Braking When the Car's Brakes Fail?

When the car's brakes fail, the electronic parking brake cannot be used for emergency braking. Relying solely on the electronic parking brake for braking is relatively inefficient. It is recommended to use manual mode to downshift and utilize the engine's resistance for cooperative braking. The mechanical parking brake operates on the lever principle, controlling the cable to press the rear brake pads for parking. However, due to the limited force of the cable, it cannot effectively brake in emergency situations. Unlike the mechanical parking brake, the electronic parking brake involves a two-step process during braking. At higher speeds, it controls the ABS through the car's EPC system, applying intermittent electronic braking with a force slightly less than emergency braking. Therefore, when using the electronic parking brake for emergency braking, you may hear a clicking sound. Generally, braking with the electronic parking brake requires a longer distance, and it should not be used as an emergency brake.
20
4
Share

How to Disinfect Germs in the Car?

Methods for disinfecting germs in the car: 1. Keep the car floor, inner walls, steering wheel, door handles, seats, and other areas clean. Wipe these surfaces with a disinfectant containing effective bromine once a day; 2. Change and wash seat covers frequently. Soak them in a disinfectant containing effective bromine for 30 minutes weekly, then rinse with clean water, dry, and reuse; 3. If an infectious patient is found in the car, disinfect immediately after the patient leaves using the above methods; 4. During an epidemic, spray the disinfectant on surfaces several times a day during breaks between rides; 5. In seasons when air conditioning is not needed, open windows for ventilation, especially for taxis that require air conditioning. Try to open windows for ventilation when there are no passengers.
4
0
Share

What are the body dimensions of the Cavalier?

The body dimensions of the Cavalier are 4474mm in length, 1730mm in width, and 1471mm in height, with a wheelbase of 2600mm. The Cavalier is a compact sedan under SAIC-GM Chevrolet, equipped with an Ecotec 1.0T dual-injection turbocharged engine and a 6-speed wet dual-clutch intelligent start-stop transmission. In terms of exterior design, the Cavalier features Chevrolet's signature dual-layer front grille with a "Gale" gradient texture inside, adding a touch of dynamism compared to current Chevrolet models. The headlight assembly is adorned with chrome trim and an innovative double L-shaped LED daytime running light strip, which comes as standard across all models.
17
2
Share

What are the symptoms of a faulty oxygen sensor in a motorcycle?

Symptoms of a faulty oxygen sensor in a motorcycle: The engine experiences decreased power and increased fuel consumption. The oxygen sensor is a very important component that detects the oxygen content in the exhaust and feeds the signal back to the ECU, allowing the ECU to adjust the air-fuel ratio. Low-end motorcycles do not have oxygen sensors; only some motorcycles equipped with fuel-injected engines are fitted with oxygen sensors. The oxygen sensor is installed in front of and behind the three-way catalytic converter. The oxygen sensor in front is called the front oxygen sensor, while the one behind is called the rear oxygen sensor. The main function of the rear oxygen sensor is to detect whether the three-way catalytic converter has failed.
20
1
Share

How should pure electric vehicles be maintained?

Maintenance methods for pure electric vehicles: mainly involve daily care for the battery pack and motor, and keeping them clean. First, perform an exterior inspection, including checking the steering wheel, seat belts, various switches inside the vehicle, and whether the combination instrument is functioning normally. Verify the functionality of the lights and horn, the aging degree of components like the wipers, and the inflation condition of the tires along with any damage or wear. For electric vehicles, it's necessary to check the antifreeze, brake fluid, and windshield washer fluid. Electric vehicles also use antifreeze, but unlike traditional vehicles, the antifreeze is used to cool the motor and should be replaced according to the manufacturer's specified intervals, typically every 2 years or 40,000 kilometers. The type of antifreeze is exactly the same as that used in traditional cars. Gear oil (transmission oil) is a fluid that needs to be replaced more frequently in electric vehicles, but the replacement intervals vary by manufacturer.
11
1
Share

How is the battery charged?

The charging method of the battery: Connect the positive terminal of the battery to the positive terminal of the power supply, and the negative terminal of the battery to the negative terminal of the power supply. Then, the initial charging is carried out in two stages: First, charge with the initial charging current until the electrolyte releases bubbles and the single-cell voltage rises to 2.3 to 2.4V. Then, reduce the current to half of the initial charging current and continue charging until the electrolyte releases intense bubbles and the voltage remains stable for 3 consecutive hours. The total charging time is about 45 to 65 hours. During the charging process, the temperature of the electrolyte should be frequently measured. Use methods such as halving the current, stopping charging, or cooling to control the temperature between 35 to 40 degrees Celsius. If the specific gravity of the electrolyte does not meet the requirements after the initial charging is completed, adjust it with distilled water or electrolyte with a specific gravity of 1.4. After adjustment, charge for another 2 hours until the specific gravity meets the requirements.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.