What should be paid attention to when changing lanes on the road?

1 Answers
SanLily
07/30/25 2:38am
When changing lanes on the road, the following aspects should be noted: 1. Observation: Observe and judge the traffic flow behind, beside, and in the lane you intend to change to; 2. Maintain distance: After confirming safety, turn on the turn signal and check again through the rearview mirror to ensure no vehicles are overtaking on either side, making sure there is a safe distance in the lane you are entering; 3. Smooth driving: Without hindering the normal flow of traffic in the target lane, steer smoothly into the desired lane and then turn off the turn signal; 4. Change on dashed lines: Only change to adjacent lanes at a time. If you need to change to a lane beyond the adjacent one, first change to the adjacent lane, drive for a while, and then change to another lane. On road sections where lane dividers are solid or dashed lines, vehicles on the side of the solid line are strictly prohibited from changing lanes.
Was this review help?
15
3
Share
More Forum Discussions

Can Flood-Damaged Cars Be Insured?

Flood-damaged cars can be insured. Here are some considerations when purchasing auto insurance: 1. Purchase channels: Pay attention to selecting legitimate channels, choosing qualified insurance companies and agents with valid practice certificates, sales licenses, and formal agency contracts with insurers. 2. Personal needs: Carefully select insurance products based on actual requirements, and fully understand the terms and conditions of motor vehicle insurance. 3. Important document handling: Pay attention to the use and safekeeping of crucial insurance documents, fulfill the obligation of truthful disclosure, pay premiums promptly, and agree with the insurer on dispute resolution methods.
4
2
Share

Will the AIONS Plus sunroof be too bright?

The AIONS Plus sunroof will not be too bright. Below is an introduction to automotive interiors: 1. Introduction: Automotive interiors mainly refer to the products used for modifying the interior of a car. 2. Content: It covers various aspects of the car's interior, such as steering wheel covers, seat cushions, floor mats, car perfumes, hanging accessories, interior decorations, storage boxes, etc., all of which are considered automotive interior products. 3. Difference: What is referred to as automotive interiors in China is actually the Interiors System in English. Since these car parts have a certain decorative function, they are commonly referred to as 'automotive interiors' in the industry. However, from the English term 'Interiors,' it can be understood that these parts are not only decorative but also involve rich functionality, safety, and engineering attributes.
7
4
Share

What Causes Air Leakage in a Vacuum Booster Pump?

Specific reasons are as follows: 1. Lack of necessary maintenance on the braking system, excessive impurities in the master cylinder, poor sealing, vacuum booster pump failure, excessively dirty brake fluid or mixed use of several types of brake fluid leading to vapor lock when heated, leakage in the master cylinder or wheel cylinder, air leakage in the air reservoir or pipeline connections. 2. Component failure due to improper operation. 3. Severe overload increases the vehicle's motion inertia under the effect of gravitational acceleration, directly leading to brake failure. Extension: Introduction: The brake booster pump, commonly known as the brake assist pump, controls the vacuum entering the booster pump during braking to move the diaphragm. Through a linkage device, the push rod on the diaphragm assists the driver in stepping on and pushing the brake pedal, thereby amplifying the force exerted by the driver on the pedal.
9
5
Share

Where is the Wuling Hongguang carbon canister solenoid valve located?

The Wuling Hongguang carbon canister solenoid valve is located inside the engine compartment, at the upper left corner of the engine. The carbon canister solenoid valve is connected to the desorption port hose of the carbon canister and is used to control the fuel vapor desorption time and the negative pressure level. Generally, the desorption port is relatively thick, so you can locate the solenoid valve by following the thicker hose. The working principle of the carbon canister solenoid valve is that it controls the purging function of the carbon canister through the modulation of electrical pulse width. In other words, the ECU (Engine Control Unit) opens or closes the solenoid valve's grounding circuit at a certain frequency based on different engine operating conditions. The ECU manipulates a normally closed solenoid valve to control the vacuum purging of the carbon canister. Symptoms of a faulty carbon canister solenoid valve: Gasoline smell inside the car: When the solenoid valve is damaged, the engine cannot draw fuel vapor from the carbon canister in time, causing the vapor to accumulate in the carbon canister until the activated charcoal becomes saturated and can no longer absorb it. Jerking during sudden acceleration: During acceleration, the ECU utilizes the fuel vapor from the carbon canister. When the ECU opens the carbon canister solenoid valve, it reduces the fuel injection amount accordingly to maintain the overall air-fuel mixture concentration. If the solenoid valve fails to open while the ECU reduces the fuel injection, the mixture becomes too lean, resulting in insufficient power and jerking.
9
2
Share

Where is the 12V battery located in the Wuling Hongguang Mini?

The 12V battery of the Wuling Hongguang Mini is located at the upper right corner of the engine. Below is some relevant information about the Wuling Hongguang Mini: 1. Dimensions: The new car measures 2917/1493/1621mm in length, width, and height, with a wheelbase of only 1940mm. The vehicle is equipped with up to 12 storage spaces, allowing two large items such as 26-inch suitcases with a width of 270mm to be placed in the rear seats. 2. Powertrain: The car is powered by a drive motor with a maximum output of 27 horsepower (20 kW). 3. Battery: The new model is equipped with a ternary lithium-ion battery pack from 80 Million Energy Power Technology Co., Ltd., offering two capacity versions: 144Ah and 96Ah. The rated voltage of the power battery system is 96V.
17
0
Share

Does a Four-Cylinder Engine Have Any Impact If One Cylinder Is Not Working?

Yes, there is an impact. When a cylinder is not working, the engine will experience a phenomenon of weak acceleration. The specific reasons leading to engine misfire are as follows: 1. Ignition System: Aging of the ignition coil and spark plugs can cause the ignition system of the cylinder to fail. When the ignition coil malfunctions, it most easily results in a decrease in power, and in severe cases, it can lead to sudden engine stalling. 2. Fuel Injection System: Clogged fuel injectors or fuel lines can prevent the cylinder from receiving sufficient fuel for combustion, naturally causing the cylinder to fail to operate properly. 3. Excessive Spark Plug Carbon Buildup: Long-term poor combustion leads to carbon deposits accumulating at the spark plug ignition point. When these carbon deposits are wetted by fuel, they create a parallel shunt resistance, resulting in spark plug leakage, weak sparking, or even spark plug failure.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.