What should be paid attention to in driving license subject 2 test?

1 Answers
Addyson
07/30/25 3:39am
Pay attention to the following points in driving license subject 2 test: 1. Mock test: The purpose of the mock test is to familiarize candidates with the test environment, and at the same time, the coach can guide the places where points are easily deducted, so the mock test is absolutely essential, and full preparation is the best way to meet the challenge. 2. Ensure sleep: Ensure sleep, the night before the test must have a good rest, to avoid involuntary nervousness and dizziness in the test the next day. 3. Bring your ID card: Bring your ID card, you must bring your ID card to take the test, without the ID card you cannot take the test, after preparing so much, do not fail to take the test because you did not bring your ID card, in addition, during the test, you must turn off your mobile phone, otherwise any situation caused by the mobile phone will be considered as cheating.
Was this review help?
6
5
Share
More Forum Discussions

Do You Need to Press the Brake for One-Button Start in Automatic Transmission?

Automatic transmission one-button start requires pressing the brake. Definition of One-Button Start: The car one-button start belongs to the keyless start system, which upgrades the traditional mechanical start to a button start. In addition to some original manufacturer model configurations, it can also be installed at the original car key lock. Precautions for Using One-Button Start: Using one-button start when the car is in P or N gear does not harm the engine, but turning off the engine while the car is in gear can cause some damage to the vehicle. Additionally, for safety reasons, it is recommended to press the brake before using one-button start to turn off the engine. Moreover, one-button start models must be turned off in P gear to completely cut off the power.
10
5
Share

Should You Keep Pressing the Accelerator When Driving Uphill in an Automatic Transmission Car?

You need to keep pressing the accelerator. If you don't, the car will idle, and the speed will gradually drop to around 20 km/h. Gears in an Automatic Transmission: Automatic transmission vehicles automatically select the appropriate gear based on driving speed and traffic conditions. Generally, automatic transmission cars have six gear positions, from top to bottom: P, R, N, D, S, L. Functions of the Gears: Driving an automatic transmission car using only Park (P), Reverse (R), Neutral (N), and Drive (D) gears is sufficient for normal driving needs. However, in some special driving conditions, other functional gears may be required. Therefore, if you can choose the correct control method, an automatic transmission car can perform better than a manual transmission car.
2
0
Share

What Are the Tire Models for Pickup Trucks?

Toyota Tundra pickup 255/70R18, 275/65R18 Foton Sup pickup 225/75R15 Foton Tunland pickup 245/70R16 FAW Kuncheng pickup 215/75R15 Zhongxing Flagship A9 pickup 205/80R14, 215/75R15 JMC Baodian 09 215/70R15 Great Wall Wingle 5 pickup official version 235/70R16, business version, wealth version 215/75R15. The first number 255 indicates the tire width is 255MM, 70 means the aspect ratio of the tire section is 70%, that is, the section height is 70% of the width, the letter R stands for radial tire, and 18 represents the rim diameter is 18 inches. In addition to the model, the tire also marks the following common data: Tire cord material: represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Commonly used speed ratings are: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification compatible with the tire. It is convenient for practical use, such as "Standard rim 5.00F".
4
5
Share

Can Automatic Transmission Cars Drift?

Automatic transmission cars can drift, and there are two methods to achieve it: gear drifting and handbrake drifting. Introduction to Drifting: Drifting is a driving technique, also known as "tail sliding." The driver causes the car to slide sideways by oversteering. It is usually compared to grip cornering. Drifting is mainly used in performances or racing events with significant changes in road conditions. Due to the friction characteristics of the road surface, drifting is frequently applied in off-road rally races, while other types of racing rarely use drifting techniques for cornering. This is because drifting on ordinary asphalt roads results in significant speed loss and increased tire wear. Unless for special reasons, drivers do not frequently use this technique during competitions. Methods of Drifting: Pull the handbrake while driving straight and then steer; pull the handbrake during a turn; slam the brakes while driving straight and then steer; slam the brakes during a turn; for rear-wheel-drive cars with sufficient power, slam the accelerator and steer when the speed is not very high.
11
3
Share

What Causes an Automatic Transmission Car to Stall at Idle When the AC is On?

Introduction to the reasons why an automatic transmission car stalls at idle when the AC is on: Clutch Pedal Issue: Beginners often struggle with clutch control, leading to situations where the clutch is released too quickly, causing the car to stall unexpectedly. Therefore, when starting a manual transmission car, it's important to control the clutch properly and keep the left foot steady. Although automatic transmission cars stall less frequently, releasing the clutch too quickly can still cause stalling. Braking Issue: Many beginners driving manual transmission cars forget to press the clutch simultaneously when braking, especially during sudden stops, which can cause the car to stall. Therefore, when braking, either shift to neutral or press the brake while holding down the clutch. Fuel Shortage Issue: Some cars have inaccurate fuel gauges, showing some fuel remaining when, in reality, the fuel supply can't keep up once the car starts moving, leading to stalling. It's crucial to refuel the car promptly to avoid stalling.
2
5
Share

Will an automatic car roll if parked in P gear without engaging the handbrake?

An automatic car will not roll if parked in P gear without engaging the handbrake. The relevant introduction to P gear usage is as follows: Principle of P gear: It mechanically locks the output shaft of the transmission to secure the car and prevent it from moving. Procedure for parking in P gear: After the car comes to a complete stop on a level surface, shift the gear from D to P, then engage the handbrake to complete the parking process, and finally turn off the engine. Safe parking method: If you only apply the brakes without shifting into P gear, the car may lose its braking capability. The safest and most reliable method is to shift into P gear after the car has come to a complete stop.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.