What should be paid attention to for self-driving tours?

2 Answers
VanAngela
07/24/25 1:01am
Here are the precautions for self-driving tours: 1. Maintain a good driving condition: Long-distance drivers must maintain good physical and mental condition, and ensure adequate sleep before driving. 2. Wear seat belts: Not only the driver and front-seat passengers, but also rear-seat passengers need to fasten their seat belts. If there are children under the age of twelve in the family, it is recommended to purchase child safety seats produced by regular manufacturers. 3. Driving in rain or snow: Turn on the fog lights and width lights. Drive slowly, do not overtake casually in bad weather, lightly press the accelerator, lightly press the brake, and turn the steering wheel slowly. When overtaking, use the horn and headlights to signal, and only overtake when the vehicle in front makes way. Be extra careful and slow down in dark and damp places such as under overpasses and at tunnel entrances, as they are prone to icing.
Was this review help?
2
0
Share
JosiahRose
08/10/25 8:43pm
As a young person who enjoys road trips, I believe the most important thing is thorough preparation. Before setting off, I always check the car condition in detail: inspect tire pressure and tread to avoid blowouts; test brakes and lights to ensure nighttime safety; fill up the fuel tank and carry a 5-liter gasoline canister just in case; and check the engine oil and coolant levels to keep them normal. Route planning is done in advance using map apps to avoid highway congestion and remote roads—I always research gas station and rest area locations beforehand. During the drive, I avoid rushing, taking a 10-minute break every hour to stretch and bring water and snacks for energy. An emergency kit is a must, stocked with first-aid supplies, a flashlight, and extra jackets for changing weather. Music is prepped, and a power bank is brought along to avoid running out of battery. Booking accommodations saves money and hassle, and I calculate the overall budget for fuel, food, and lodging, bringing some cash as backup. This way, the journey is both adventurous and low-risk, making the trip more enjoyable—just remember, safety first, no distractions.
Was this review help?
5
3
Share
Expand All
More Forum Discussions

Is it problematic to leave liquor in a hot car?

Leaving liquor in a hot car is problematic. Here are the impacts of storing liquor in the trunk: 1. High temperature poses risks: Liquor typically has a high alcohol concentration and a low ignition point, making it generally flammable. Additionally, if a car is parked outdoors for an extended period, the interior temperature can become quite high, especially in the trunk area, which is less ventilated and thus hotter than other parts of the car. After exposure to direct sunlight, temperatures can even reach 40-50 degrees Celsius. 2. Affects taste: If liquor is stored in the trunk for a long time, chemical reactions can occur, leading to spoilage, which significantly impacts the liquor's taste.
4
4
Share

What Causes a Car to Shake on the Highway?

Here are the specific reasons why a car shakes on the highway: 1. Engine carbon deposits: The throttle valve or fuel injector is more prone to carbon deposits. Therefore, when the vehicle experiences shaking, the first step should be to check the throttle valve and fuel injector. If the throttle valve is found to be excessively dirty or the fuel injector has too much carbon buildup, they should be promptly cleaned using fuel injector cleaner and throttle valve cleaner. 2. Engine mount failure: The engine mount is responsible for absorbing the slight vibrations generated during engine operation. If there is an issue with the engine mount, these vibrations will be transmitted to the steering wheel and the interior of the vehicle, causing shaking during idle. Starting the vehicle's electrical system is most likely to cause shaking, as the engine will increase its load due to the activation of the electrical system, leading to a drop in idle speed.
7
0
Share

How to Determine the National Emission Standard of a Truck?

Truck owners can check the environmental compliance label on the vehicle to identify its emission standard, thereby determining which national standard it meets. Below is relevant information about emission standards: 1. Introduction: Vehicle emission standards are established to control pollutant emissions from automobiles. To curb the generation of these harmful gases and encourage manufacturers to improve their products in reducing emission sources, both Europe and the United States have formulated relevant automotive emission standards. These standards are continuously supplemented, refined, and tightened in response to the increasing number of vehicles and the worsening of environmental conditions. 2. Emissions: Automotive emissions refer to harmful gases discharged from exhaust, including carbon monoxide, hydrocarbons, nitrogen oxides, particulates, soot, etc. These are all harmful byproducts generated during the engine's combustion process.
13
4
Share

What are the Baby Bull and the Big Bull in terms of cars?

The Baby Bull and the Big Bull are both Lamborghini models. The Big Bull specifically refers to Lamborghini's flagship supercars, including the current flagship Aventador, the previous generation flagship Murcielago, and the earlier flagship Diablo, among others. The Baby Bull refers to Lamborghini's entry-level supercars, such as the current Huracan and the previous generation Gallardo. The differences between the Baby Bull and the Big Bull are as follows: 1. Size: The Big Bull is longer than the Baby Bull. For comparison, the previous generation flagship Murcielago LP670-4 SV and the previous generation Baby Bull Gallardo LP570-4 Superleggera can be referenced. 2. Door Style: The Big Bull comes standard with scissor doors. For example, the Aventador's scissor doors open outward, resembling a bird spreading its wings, while others rise vertically. The Baby Bull, however, uses conventional hinge-style doors and does not offer scissor doors as an option, requiring aftermarket modifications if desired. 3. Engine Differences: The Big Bull is equipped with a V12 naturally aspirated engine, while the Baby Bull has a V10 naturally aspirated engine. This is the most significant distinguishing feature.
19
3
Share

Where is the tire pressure monitoring displayed?

Tire Pressure Monitoring System (TPMS) can be viewed on the central LCD screen of the instrument panel or the multimedia screen. The TPMS automatically monitors the tire pressure in real-time during vehicle operation and alerts the driver in case of tire leakage or low pressure to ensure driving safety. There are three commonly used tire pressure monitoring methods: Direct TPMS: The direct TPMS uses pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the pressure data for each tire. The system automatically alerts the driver if the tire pressure is too low or if there is a leak. Indirect TPMS: When the pressure of a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, resulting in a faster rotation speed compared to other wheels. By comparing the differences in rotation speeds between tires, the system monitors the tire pressure. The indirect tire alert system essentially relies on calculating the rolling radius of the tires to monitor pressure. Tire Pressure Monitoring System (TPMS): This system combines the advantages of both the direct and indirect systems. It is equipped with direct sensors in two diagonally opposite tires and includes a 4-wheel indirect system. Compared to a full direct system, this hybrid system can reduce costs and overcome the limitation of indirect systems, which cannot detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time pressure data for all four tires as effectively as a direct system.
4
5
Share

Can You Make a U-turn at Highway Service Areas?

Making a U-turn through the interconnected passages of highway service areas might be possible and not considered a traffic violation, but it is not recommended to attempt it lightly. Below is relevant information about highway service areas: 1. Class I Service Areas: These offer the most comprehensive and high-quality facilities, including gas stations, parking lots, convenience stores, free lounges, restaurants, and auto repair shops. They typically also feature well-equipped accommodations, bathing facilities, and more. Depending on needs and geographical location, some may also include business meeting rooms, logistics storage, cold storage rooms, and tourist leisure areas. 2. Class II Service Areas: Compared to Class I, these have slightly fewer supporting facilities but are more comprehensive than Class III. They provide convenience stores, auto repair shops, restaurants, gas stations, parking lots, and public restrooms. Class II service areas may also include accommodations and bathing facilities in moderate sizes to offer better services for travelers. 3. Class III Service Areas: These only provide the most basic services compared to Class I and II, primarily featuring convenience stores, parking lots, gas stations, public restrooms, and restaurants to meet the most essential and urgent needs of drivers and passengers. Generally, they do not include accommodations or other related service facilities.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.