···
Log in / Register

What should be paid attention to during the road test?

4 Answers
DanteLynn
07/28/25 11:28pm

Precautions for the road test: 1. Pay attention to the driving route and speed control of the car; 2. Pay attention to the use of car lights; 3. During the test, be sure to listen clearly to the examiner's instructions and avoid excessive nervousness, especially slow down when approaching intersections and obstacles; 4. Pay attention to traffic signals during the test and do not run red lights; 5. When parking by the roadside, first slow down and steer to the right, turn on the right turn signal, apply the brakes to slow down the speed, and press the clutch to stop the car steadily. The road test generally includes preparation for getting on the car, light simulation, starting and driving straight, gear operation, lane changing, etc. During the test, there are two opportunities. If both opportunities fail, you need to wait for ten days before scheduling the test again.

Was this review help?
6
0
Share
TeaganMarie
08/12/25 2:46am

I just passed my driving test not long ago, and the most crucial thing during the road test is to stay relaxed and not nervous. Practice more to get the feel, especially ensuring smooth starts and stops. The examiner values safety details, such as checking mirrors and blind spots before turning, stopping before the line at red lights. Control your speed appropriately—not too fast or too slow—and maintain a following distance of about one or two car lengths. Also, don’t forget to use your turn signals, activating them at least three seconds before turning. When parking, choose a spot that doesn’t block traffic, and reverse slowly while looking back. I passed on my second attempt; the first time, I was too nervous and stalled twice, but taking deep breaths helped the second time. Practice maneuvers in an empty lot to get familiar, and don’t panic when the examiner gets in the car—just drive as usual. Remember, the examiner is assessing your safety habits, not trying to trip you up. In short, repeated practice and staying calm are key. Once you pass the road test, continue prioritizing safety on the road, building good habits from the very start.

Was this review help?
20
5
Share
Expand All
EthanLee
10/01/25 5:45am

As someone who has been driving for over twenty years, the road test is essentially evaluating whether your daily driving habits are up to standard. The key lies in obeying traffic rules and preventing accidents. For instance, don't speed in speed-limited zones, slow down in school areas, and watch out for pedestrians. When turning, don't rush—ensure blind spots are clear before moving. Park on level ground without obstructing others, and use the handbrake on slopes to prevent rolling. During the test, observe traffic light changes carefully, and don't rush when the light is about to turn green. Small details like fastening your seatbelt, adjusting mirrors correctly, and using wipers at the right time should not be overlooked. Remember, the examiner values long-term safe behavior—if you make a mistake, stay calm, acknowledge it, and continue driving well. After passing the road test, you still need to accumulate more experience on actual roads. Develop good habits in daily driving, and the test will go smoothly naturally. Stay calm, practice more, and prioritize safety over rushing.

Was this review help?
3
3
Share
Expand All
Molly
11/14/25 7:33am

During the road test, I paid special attention to vehicle control details, as solid skills are the foundation of safety. For example, when starting, clutch control should be steady to avoid stalling—beginners tend to jerk forward too abruptly. When turning, the steering wheel should move smoothly without forceful pulling. Brake gently and avoid sudden stops that might upset the examiner. At red lights, avoid abrupt stops and starts to maintain smooth traffic flow. Also, check that the lights function properly—turn signals and headlights should activate and switch automatically when needed. When reversing, look over your shoulder for blind spots instead of relying solely on mirrors, as examiners often check this. Choose level ground for parking, engage the handbrake firmly, and ensure the car doesn’t wobble. Before each maneuver, remind yourself to take small, deliberate steps to get it right the first time. After the test, review any mistakes for future improvement. Practice reversing in empty lots to simulate real test scenarios. With refined skills, passing the road test becomes easier—the key lies in accumulating good habits through daily practice.

Was this review help?
18
0
Share
Expand All
More Forum Discussions

What is the reason why the old Honda CRV does not generate electricity when the air conditioner and headlights are turned on?

The reason why the old Honda CRV does not generate electricity when the air conditioner and headlights are turned on may be partial engine damage, abnormal wiring connections, or indicator light circuit failure. The following is a detailed introduction about the Honda CRV: 1. Overview: The Honda CR-V is a classic urban SUV model produced by Dongfeng Honda Automobile Company. The 2015 CR-V features a sporty and fashionable design appearance, paired with Michelin Latitude series SUV tires, offering excellent handling performance. 2. Others: The wheelbase is 2620mm. The vehicle dimensions are 4550 1820 1685mm. The trunk volume is 862 liters. The fuel consumption is 6.4L/100km. The fuel tank capacity is 53. The standard seating capacity is 5. The maximum speed is 182km/h. The seat materials are fabric, imitation leather, or genuine leather. The acceleration time is 9.3 to 10.3 seconds. The driving methods are front-wheel drive, front four-wheel drive, or timely four-wheel drive.
9
5
Share

What are the hidden features of the 2012 Kia K5?

The hidden features of the 2012 Kia K5 include automatic window roll-up after locking, parking lot vehicle locator, automatic trunk sensing, and remote window opening. Below are detailed introductions about the Kia K5: 1. Overview: The Kia K5 is a mid-to-high-end sedan under Dongfeng Yueda Kia. Its high waistline and strong tension design make the K5 more dynamic, reflecting a sense of vitality and energy. The vehicle dimensions are 4.845 meters in length, 1.830 meters in width, and 1.455 meters in height, with a wheelbase of 2795mm. 2. Others: The maximum torque is 202Nm/rpm. The braking system is four-wheel disc brakes. The curb weight is 1515 kg. The fuel tank capacity is 70 liters. The engine type is a 2.0L engine. The maximum power is 165KW/rpm. The drive type is rear-wheel drive. The standard transmission is a 6-speed automatic transmission with manual shift mode.
20
4
Share

How Long After Replacing Car Glass Can You Drive?

You can drive three days after replacing car glass. Here are specific instructions for car glass replacement: 1. Avoid washing the car: Do not wash the car within three days after replacing the windshield, and remove the tape securing the windshield position after three days. 2. Drive steadily: Try to avoid driving on excessively bumpy roads, and avoid sudden braking and rapid acceleration to prevent windshield displacement. Do not apply window film within seven days. When driving within three days after rear windshield replacement, do not open the windows to prevent displacement caused by wind pressure. Do not insert parking permits or other cards into the gap between the front windshield and the dashboard.
19
4
Share

Can engine oil still be used after being left in a high-temperature car?

Engine oil cannot be reused after being left in a high-temperature car. Below are the specific functions of engine oil: 1. Shock absorption and cushioning: When the pressure at the engine cylinder port rises sharply, it suddenly increases the load on the piston, piston chips, connecting rod, and crankshaft bearings. This load is transmitted and lubricated through the bearings, providing a cushioning effect against the impact load. 2. Rust and corrosion prevention: Lubricating oil can adhere to the surface of parts, preventing contact with water, air, acidic substances, and harmful gases. 3. Lubrication and wear reduction: There is rapid relative sliding between the piston and cylinder, as well as between the main shaft and bearing shells. To prevent excessive wear on parts, an oil film of sufficient thickness must be established between the two sliding surfaces to separate the relatively sliding surfaces, thereby reducing wear. 4. Cooling: Engine oil can carry heat back to the oil tank and then dissipate it into the air, helping the radiator cool the engine.
15
1
Share

Where is the PCV valve located on the Wuling Hongguang?

The PCV valve on the Wuling Hongguang is located near the rear side of the throttle in the engine compartment, between the compressor outlet and the condenser inlet. Relevant information is as follows: Function of the exhaust valve: It allows a portion of the exhaust gases to recirculate back into the cylinder for combustion. This small amount of exhaust gas lowers the combustion temperature in the cylinder. Since NOX is generated under high-temperature and oxygen-rich conditions, this process inhibits NOX formation, thereby reducing NOX emissions. Working principle of the exhaust valve: The high-pressure gas (gaseous working medium and lubricating oil) discharged from the compressor enters the exhaust valve's guide vane, where it flows in a spiral pattern. The centrifugal force and gravity separate the lubricating oil from the working medium gas, which then flows down along the inner wall of the cylinder. The working medium gas passes through a multi-hole baffle and is discharged from the central pipe of the exhaust valve. The separated lubricating oil accumulates in the lower part of the oil separator and can be periodically drained or automatically returned to the compressor's crankcase via a float valve.
19
0
Share

What causes the sluggish acceleration and muffled sound in a 2009 Cruze?

The reasons for sluggish acceleration and muffled sound in a 2009 Cruze are as follows: 1. Intake system: Air is one of the power sources for the engine. If the air filter is clogged due to prolonged use without timely cleaning, insufficient air volume will result in an overly rich combustible mixture, causing a decrease in engine power. For vehicles equipped with turbochargers, if the turbocharging device malfunctions, the engine will remain sluggish and fail to deliver power even when the throttle is applied. 2. Engine overheating: Insufficient engine oil, inadequate engine coolant, or malfunctioning engine cooling systems can all increase the engine's load, leading to poor heat dissipation. Engine overheating can result in poor lubrication, increased mechanical wear, reduced engine power, and sluggish acceleration. 3. Fuel system issues: Blockages in the fuel tank vent, fuel tank switch, fuel filter, or the fuel line between the tank and the carburetor can restrict fuel supply, causing a lean mixture and resulting in sluggish engine acceleration.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.