···
Log in / Register

What should be paid attention to during the first car maintenance?

4 Answers
DiElliana
07/23/25 5:16pm
Precautions for the first car maintenance: 1. Check the coolant, tire bolts, and lighting system: Ensure the coolant level is normal, check if the tire bolts are loose, and verify that the lighting system is functioning properly; 2. Replace and add engine oil: It is essential to clean the three filters, namely the oil filter, fuel filter, and air filter; 3. Check the bolts under the chassis for looseness, inspect the triangular arm and ball joints, connecting rod ball joints, triangular arm elastic hinges and ball joints, drive shaft dust covers, steering mechanism, steering ball joints, front and rear shock absorbers and other suspension components, and tire pressure; 4. Check tire pressure: Inspect the tire pressure and wear condition, and perform tire rotation if there is wear or the need for air refill.
Was this review help?
2
1
Share
LaKinsley
08/10/25 12:55pm
I remember feeling a bit overwhelmed during my car's first maintenance service. I had just gotten my new car and driven about 5,000 kilometers when the manual said it was time for maintenance, so I rushed to the 4S shop. There are a few key points to note: First, make sure to go within the mileage or time limit—new cars typically require their first service between 5,000 to 10,000 kilometers—don’t delay. I went slightly over the mileage that time and almost voided the warranty. Second, bring the vehicle manual and your ID, as the shop needs to record the details. Once there, the technician checked and replaced the engine oil and filters, and also helped inspect basic items like tire pressure, brakes, and lights. I asked a few extra questions and picked up some useful knowledge, like how fresh oil makes the car run smoother. I’d recommend booking an appointment in advance to save time—the service usually takes about one to two hours, during which the shop provides snacks and drinks. I actually enjoyed the experience. Don’t forget to get the maintenance receipt afterward for future tracking. It’s not complicated, and as a beginner, don’t be afraid to ask questions—you’ll gain experience over time.
Was this review help?
20
2
Share
Expand All
TessaDella
09/22/25 7:18am
As someone who's worked in the auto industry, I often see car owners neglecting their first maintenance. The first service is crucial for a new car's health and should be done within 5,000 to 8,000 kilometers or six months. Free services are common, but make sure to confirm your appointment and don't skip any steps. The focus should be on checking core components: the engine oil must be changed, and the filters should be replaced as well. Also, inspect brake disc wear, tire balance, and suspension tightness. I recommend owners stay present during the service—don't just wait around. Chat with the technician about any unusual noises or fuel consumption to catch issues early. After maintenance, take a test drive to feel any changes and ensure everything's normal. Delaying can accelerate wear and lead to higher repair costs. Make it a habit—the first service is the foundation, making future maintenance much easier. I've seen many cars develop early problems due to neglected first services—it's just not worth it.
Was this review help?
14
2
Share
Expand All
Rich
11/05/25 10:38am
Neglecting the first maintenance can hide potential hazards, as someone who has driven for years in a family, I understand this best. The first maintenance of a new car ensures the foundation of safe driving; missing it may lead to deteriorated oil or loosened components. Key points: Follow the manual's instructions and go on time, usually every six months or 6,000 kilometers. Remember to bring your purchase documents for record-keeping. Oil change is mandatory, and don’t overlook the filter and fluid levels; ensure even tire pressure and brake testing is essential. I always recommend personally supervising the process and not easily falling for free gimmicks. After completion, test-drive to check for any abnormalities. Delaying only increases risks, such as suspension issues causing wobbling. Timely maintenance is an investment in safety, and I insist on reminding beginners to develop good habits.
Was this review help?
11
3
Share
Expand All
More Forum Discussions

What do M+ and M- mean in a car?

M stands for Manual, indicating the manual gear shifting mode. Generally, the + and - signs on an M-gear transmission mean shifting gears by pushing the gear lever forward or backward or using the steering wheel paddle shifters. Below are the technical requirements for gear shifting: 1. Timely: Master the appropriate gear shifting timing, meaning neither upshifting too early nor downshifting too late. 2. Correct: The coordination of the clutch pedal, accelerator pedal, and gear lever should be accurate and harmonious, with precise positioning. 3. Smooth: After shifting into a new gear, release the clutch pedal promptly and smoothly. 4. Swift: The action should be quick to shorten the gear shifting time, reduce the loss of the car's kinetic energy, and lower fuel consumption.
6
5
Share

Can You Start the Engine If Water Enters the Exhaust Pipe?

If only a small amount of water enters the exhaust pipe, you can still start the engine; however, if a large amount of water enters the exhaust pipe, it is advisable not to start the engine. A significant amount of water in the exhaust pipe can cause the engine to stall. If you attempt to start the engine under such conditions, it may lead to deformation of the engine connecting rod or even cylinder puncture. The exhaust pipe is a device designed to reduce vibration and noise, facilitate installation, and extend the lifespan of the exhaust muffler system. It is installed between the engine exhaust manifold and the muffler, providing a flexible connection for the entire exhaust system. Exhaust pipes are primarily used in light vehicles, compact cars, buses, motorcycles, and similar vehicles.
7
2
Share

Where is the thermostat located on the Chery Tiggo 3?

The thermostat of the Chery Tiggo 3 is located at the upper water outlet of the engine. The car thermostat is a valve that controls the flow path of the engine coolant. It automatically adjusts the amount of water entering the radiator based on the coolant temperature to ensure the engine operates within an appropriate temperature range, which can help save energy. The Chery Tiggo 3 is a compact SUV launched by Chery Automobile, with dimensions of 4420mm in length, 1760mm in width, and 1670mm in height, and a wheelbase of 2510mm. It is equipped with a 1.5L naturally aspirated engine with a maximum power of 85kw, paired with a 5-speed manual transmission.
13
2
Share

How to Install the Rear Camera of a Dash Cam?

Installation method for the rear camera of a dash cam: 1. Plug in the rear camera connector and the power supply on the cigarette lighter, then check if both front and rear cameras are functioning properly; 2. After confirming everything is correct, start routing the wires; 3. Tuck the wires into the plastic panel above and connect them to the fuse box; 4. Use a trim tool to guide the rear camera wire to the rear windshield and remove the panel above the rear glass; 5. Pull the wire through the hole and install the camera in the position of the removed panel. A dash cam is a device that records images, sounds, and related information during vehicle travel. After installing a dash cam, it can record the entire driving process in video and audio, providing evidence for traffic accidents.
12
5
Share

What to Do When a Sunroof Leaks into the Car?

Here are the causes and solutions for a car sunroof leaking: 1. The sunroof drain is clogged with debris: This prevents water from draining, causing it to seep into the car. Clear the sunroof's drainage channel or use a towel to clean the drain outlet, ensuring water drains properly to the ground. 2. Damaged sunroof seal: This causes poor edge sealing, allowing water to enter the car. Replace the sunroof seal with a new one. 3. Gaps in the sunroof frame: Apply sealant to the sunroof frame. If the vehicle is under warranty, the most straightforward solution is to replace the sunroof frame, which typically takes a professional technician about three days.
16
3
Share

How to Check the Car Model?

Methods to check the car model: You can look at the vehicle identification plate, which details the manufacturing date, engine displacement, power (kW), and other parameters. The location of the vehicle identification plate varies by car but is generally found on the lower part of the passenger side door; opening the door will reveal it. The car model is a unique identifier assigned to a class of vehicles, consisting of pinyin letters and Arabic numerals. According to national standards, the model of a domestically produced car should indicate the manufacturer, type, and key characteristic parameters. The vehicle identification plate is a tag that displays the basic features of the vehicle, including the manufacturer, model, engine power, total weight, load capacity or passenger capacity, manufacturing number, production date, and manufacturer's name.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.