···
Log in / Register

What should be paid attention to during the break-in period of the Tiguan L?

4 Answers
OliveRose
07/29/25 4:09am
Tiguan L break-in period precautions: 1. Warm up before starting - turn the key to the second position and wait 5 to 10 seconds before ignition; 2. Avoid emergency braking, as it not only impacts the braking system during break-in but also increases shock loads on the chassis and engine; 3. Avoid overloading within the first 300 kilometers of driving, as operating a new vehicle at full capacity during break-in may cause damage to mechanical components. The Tiguan L is a mid-size SUV with exterior dimensions of 4506mm in length, 1809mm in width, and 1685mm in height, with a wheelbase of 2684mm. It is equipped with a 1.8TSI turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm.
Was this review help?
13
0
Share
DeReid
08/12/25 4:00pm
Friends who just picked up the Tiguan L should take note: the first two to three thousand kilometers really require gentle driving. Avoid frequently flooring the accelerator and revving the engine—try to keep the RPM below 4,000. Driving steadily is particularly good for the engine. Also, don’t overload the car with passengers or pack the trunk too full, allowing both the engine and suspension system to adapt comfortably. For the first 300 kilometers, the brakes aren’t fully worn in yet, so maintain a sufficient following distance. Additionally, avoid prolonged highway driving at high speeds; keep it around 100 km/h, as going too fast isn’t ideal for transmission break-in. After hitting 500 kilometers, you can gradually increase the RPM slightly to exercise all the gears, which will lead to smoother power delivery later on.
Was this review help?
7
1
Share
Expand All
DelLucy
10/03/25 2:02am
During the break-in period, the key is to control your right foot! Avoid aggressive acceleration when starting, especially when the engine is cold. Don't floor the throttle until the coolant reaches operating temperature. The same goes for the transmission - minimize using Sport mode or manually forcing high RPMs in automatic transmissions, let the gears engage gently. For the first 1,000 km, avoid hard braking by anticipating road conditions and using gradual braking to ensure even wear on brake discs and pads. Monitor your engine oil condition regularly - if you notice excessive metal particles or significant power loss, visit the dealership promptly. There's no need for intentional 'high-speed runs' - after about 1,500 km of normal driving, your vehicle will naturally become more responsive.
Was this review help?
9
2
Share
Expand All
GabrielLynn
11/16/25 3:42am
As a car owner who has gone through the break-in period, here's my advice for driving the new Tiguan L: For the first 500 kilometers, drive more in the city with frequent stops and starts, but avoid being too aggressive, allowing the clutch and brakes to fully adapt. During the mid-phase, take some short highway trips, keeping the speed between 100-110 km/h, and take breaks after half an hour of driving. Throughout the process, pay attention to changes in engine temperature and check the dashboard for any abnormal warnings. Always refuel with 95 octane or higher. By the time you reach the first maintenance mileage, you'll notice the throttle response becomes noticeably more responsive, and fuel consumption will stabilize.
Was this review help?
13
2
Share
Expand All
More Forum Discussions

What car has tires that are 3.75 meters tall?

Having tires that are 3.75 meters tall is the Northern Heavy Duty TR100. Here are the specific details about the tires: 1. Tire function: Tires support the entire weight of the vehicle, bear the load of the car, transmit traction and braking torque, ensure the adhesion between the wheels and the road surface, reduce and absorb the vibrations and impact forces during driving, prevent severe vibrations and early damage to car components, adapt to the high-speed performance of the vehicle and reduce driving noise, ensuring safety, handling stability, comfort, and energy efficiency. 2. Tire maintenance methods: Tire maintenance methods include regularly cleaning stones from the tire treads, reducing exposure to sunlight, frequently checking tire pressure, paying attention to suspension maintenance, regularly inspecting front wheel alignment, and being mindful of driving habits.
19
1
Share

Will the Transmission Get Waterlogged After Wading?

Wading can cause water to enter the transmission. Here are the specific details about the transmission: 1. Definition: The transmission mainly refers to the vehicle's gearbox, which is divided into manual and automatic types. A manual transmission primarily consists of gears and shafts, achieving speed and torque changes through different gear combinations. An automatic transmission (AT) is composed of a torque converter, planetary gears, a hydraulic torque variation system, and a hydraulic control system, achieving speed and torque changes through hydraulic transmission and gear combinations. 2. Maintenance Methods: Correctly replace the transmission fluid. A better method is dynamic fluid replacement, which uses specialized transmission cleaning equipment to fully circulate the old fluid during operation, drain it completely, and then add new transmission fluid, achieving a replacement rate of over 90% and ensuring good results. Check the automatic transmission fluid level properly. The method for checking automatic transmission fluid differs from engine oil. Engine oil is checked when the vehicle is cold, while transmission fluid needs to be preheated to about 50°C. Then, after shifting the gear lever through each position for 2 seconds and placing it in park, the fluid level on the dipstick should be between the maximum and minimum marks. If it is insufficient, add the same quality fluid promptly.
16
3
Share

Can Wet Dual-Clutch Transmissions Wade Through Water?

Wet dual-clutch transmissions can wade through water, but it's important to pay attention to the water depth. Here are some precautions for using wet dual-clutch transmissions: 1. Avoid stomping on the accelerator in traffic jams: When driving a car with a dual-clutch transmission, if you encounter a traffic jam or need to stop at a traffic light, try to avoid stomping on the accelerator. This can cause the transmission to shift gears frequently, not only creating a jerky sensation but also causing the transmission to overheat too quickly, potentially leading to damage. 2. Press the brake pedal firmly or shift to N gear when temporarily stopping: When temporarily stopping, the brake pedal should be pressed more firmly. If the waiting time is long, you can also shift directly to N gear. If your foot slips on the brake, it might cause the transmission to remain in a semi-engaged state.
11
5
Share

i for intake or e for exhaust?

I stands for intake, which means IN in English, referring to the air entering the engine. E represents exhaust, also the first letter abbreviation of the English word for exhaust. Below are specific details about automotive exhaust pipes: 1. Overview: The exhaust pipe is part of the engine's exhaust system, which mainly includes the exhaust manifold, exhaust pipe, and muffler. Typically, the three-way catalytic converter, which controls engine pollutant emissions, is also installed in the exhaust system. Exhaust pipes generally consist of a front pipe and a rear pipe. 2. Function: For the vehicle's body, the exhaust pipe serves to reduce vibration and noise, as well as extend the lifespan of the exhaust and muffler system. Its working principle involves diverting airflow through multiple channels, where these divided streams rub and collide with each other, gradually reducing the airflow's velocity. This cycle repeats, ultimately allowing the exhaust gases to be emitted through the vehicle's exhaust pipe, thereby reducing noise and achieving the daily noise reduction effect for automobiles.
20
2
Share

What is the Road and Bridge Ticket During Vehicle Inspection?

Road and bridge tickets during vehicle inspection are mandatory fees that must be paid during the use of a vehicle after it has been registered. Below are specific details about vehicle inspection: 1. Definition: The annual vehicle inspection process refers to the fixed procedure that motor vehicles must undergo each year. It is a mandatory test for every vehicle, equivalent to a physical examination for the vehicle, aimed at promptly eliminating potential safety hazards. 2. Notes: If all items pass at once, the process takes about 2 hours; the compulsory traffic insurance policy must be valid; bring all necessary documents and files that might be needed; do not forget to bring the triangular warning sign and fire extinguisher; if the vehicle body has been modified or has non-compliant stickers, please clean them up before going for the annual inspection.
17
3
Share

Is solid color paint 1k or 2k?

Solid color paint is 1k. Below are specific details about solid color paint: 1. Difference from metallic paint: Metallic paint gets its name from the metal powder mixed in it. Not only does metallic paint make the painted surface appear dazzling, but due to light refraction, the car color and even its outline can change when viewed from different angles. Cars that appear reflective under sunlight generally use metallic paint. Another reason many car enthusiasts commonly choose metallic paint is that the addition of metal powder increases the hardness of the paint, making the surface harder, more wear-resistant, and less prone to scratches, whereas solid color paint does not have this effect. 2. Application: Suitable for the surface protection of metals, wood, plastics, and building exteriors, it can also be used as a surface protection and decorative coating for epoxy, polyurethane, acrylic series, and other paints.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.