···
Log in / Register

What should be paid attention to before driving?

4 Answers
StLaura
07/29/25 4:00pm

Before driving, it is necessary to pay attention to car maintenance and night driving safety. Car maintenance: Before hitting the road, it is essential to perform regular car maintenance on schedule. Additionally, before each drive, check the vehicle's condition. For example, the simplest step is to walk around your car to inspect not only for any oil stains underneath but also the tire pressure of all four wheels. Night driving safety: Be cautious when driving at night. Nighttime driving offers poorer visibility, making it harder to see far ahead, which can easily cause panic while driving. When driving at night, first ensure to reduce your speed. If there are streetlights, using low-beam headlights is sufficient.

Was this review help?
3
5
Share
ONathan
08/15/25 4:07am

I make it a habit to spend time on a thorough check before driving. First, I ensure the basic safety conditions of the vehicle are good: tire pressure shouldn’t be too low or too high—the general standard is around 2.5 bar, as leaks or wear can increase the risk of a blowout; engine oil and coolant levels should be normal to avoid overheating or breakdowns; headlights and brake lights should be tested, especially crucial for nighttime driving. Then, I plan my route, using a navigation app to check real-time traffic and weather conditions. If severe weather like heavy rain or fog is expected, I adjust my plans or delay departure. Personal preparations are also essential: seat belts must be fastened securely, and the seat and mirrors should be adjusted to the most comfortable and visible positions. I always carry my driver’s license and vehicle registration in case of checks. For long trips, I also check if the fuel tank is full enough and pack some bottled water and a first-aid kit. Consistently spending 5-10 minutes on these checks before each trip can significantly reduce the risk of accidents and make the journey much safer.

Was this review help?
11
4
Share
Expand All
SadieLynn
10/12/25 5:13am

As a seasoned driver, I prioritize the combination of efficiency and safety. Before starting the car, I quickly glance at the tires to ensure no bulges or leaks. Keeping the fuel gauge above half a tank is the safest bet to avoid running out of gas in unfamiliar areas. A simple flick of the light switches tests the lights, and I make sure the wipers and washer fluid are functional for rainy emergencies. Adjusting the seat and mirrors for a clear rear view and hearing the seatbelt buckle click securely gives me peace of mind. Checking a weather app, bringing coffee or snacks to prevent fatigue, and regular maintenance like oil changes every 5,000 kilometers to avoid major repairs from minor issues are also recommended. These steps take just three minutes but make driving much smoother and safer, especially reducing unexpected situations on highways.

Was this review help?
13
1
Share
Expand All
EllieAnn
11/25/25 6:16am

As a beginner driver, I pay special attention to basic safety points before driving. The core is to fasten the seat belt—never start the engine without it. Adjust the seat so your feet can firmly press the brake, and set the rearview mirror angles to cover blind spots. Simply check fuel levels and tire pressure using a mobile app or the car’s dashboard readings; if warning lights like ABS are on, address the issue before hitting the road. Plan short routes using a map app to avoid detours. Exercise extra caution in bad weather and start slowly. Remember to carry essential documents like your driver’s license in your bag. Developing this routine ensures every trip is safer and more reliable.

Was this review help?
6
4
Share
Expand All
More Forum Discussions

How to Reset the Tire Pressure Monitoring on the Regal?

To reset the tire pressure monitoring system on the Regal: Turn the ignition to ACC, access the driver information center to find the tire pressure display relearn function. Follow the prompts to deflate each tire until the system alerts for each one sequentially. After all four tires have triggered alerts, reinflate them to the specified pressure to complete the reset. The Regal is a model under Buick by Shanghai GM, with body dimensions of 4843mm in length, 1856mm in width, and 1484mm in height, and a wheelbase of 2737mm. Its advantages include a stylish and dynamic exterior design, refined interior with abundant features, and powerful performance in T-series models.
6
4
Share

What causes the abnormal noise when the BMW X3 is running?

BMW X3 running with abnormal noise may be caused by the following reasons: Oil problem: The engine oil does not fully lubricate all parts of the engine. It takes some time for new oil to evenly lubricate all components. If the noise persists after a while, it may indicate severe wear. Additionally, cleaning the internal parts of the engine can enlarge the gaps caused by wear. Poor sealing: Large gaps and poor sealing can lead to deteriorating engine conditions, which may also cause noise. It is recommended to have it checked at a repair shop. Maintenance issue: Lack of maintenance may result in excessive carbon buildup (such as in the engine, throttle, spark plugs, etc.). Cleaning at a repair shop can resolve this issue.
10
3
Share

What does Honda HISS mean?

Here is an introduction about Honda HISS: 1. Introduction: HISS stands for "Honda Ignition Security System", which is an electronic anti-theft system consisting of three main components: a microchip transponder embedded in the key handle, internally programmed with a serial number and authentication key; an ECU engine control computer module; and a sensing coil located at the lock position. After normal shutdown, a flashing red light from HISS indicates that the chip anti-theft function is active. 2. Function: The purpose of HISS is to prevent thieves from starting the vehicle. If a thief were to hotwire or use lock-picking tools to connect the vehicle's main circuit, the anti-theft program in the ECU would immediately read the microchip information in the key via the sensing coil.
6
2
Share

What is the difference between Baojun and Chevrolet car engines?

Baojun and Chevrolet car engines have no difference, they use the same engine. 1.5L naturally aspirated engine: Some models of the Baojun and Chevrolet brands use the same engine, such as the Baojun 730 equipped with a 1.5L naturally aspirated engine and the Chevrolet Cavalier or Sail 3 models with a 1.5L naturally aspirated engine, which share the same engine. Engine performance: The maximum power of this engine is 108kW, and the maximum torque is 250 Nm. The engine's maximum power speed is 5200 rpm, and the maximum torque speed ranges from 2200 to 3400 rpm. This engine is paired with either a 6-speed manual transmission or a CVT transmission.
5
3
Share

Why can't the Envision start due to low battery power?

Envision's inability to start due to low battery power can be attributed to battery aging, generator failure, or electrical leakage. Below are detailed explanations of these issues: Battery Aging: The battery is a consumable automotive component with a typical lifespan of 2-3 years, during which natural power degradation occurs. Owners should replace the battery with a new one. Generator Failure: A malfunctioning generator will fail to properly charge the battery, resulting in prolonged battery depletion. It is recommended to check whether the generator is functioning normally. Electrical Leakage: If the vehicle is equipped with numerous electrical appliances and certain devices have leakage issues, this can lead to battery depletion.
13
0
Share

What Causes the Transfer Case Vibration in Haval H9?

Haval H9 transfer case vibration is caused by the following reasons: Damage to friction plates and steel plates: The vibration in the Haval H9 transfer case is usually due to damaged internal friction plates and steel plates, which show signs of high temperature and wear. These require replacement with new friction plates. During installation, proper clearance adjustment is necessary to ensure the repaired transfer case functions correctly, completely resolving the vibration issue. Function of the transfer case: The transfer case is a transmission mechanism, primarily responsible for power transmission. Failures mainly arise from internal differential or clutch damage. The primary symptom of such failures is often vibration, which is most noticeable during startup or when turning the steering wheel to full lock. However, there's no need to worry as these issues can be repaired.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.