What should be paid attention to after picking up a new car?

1 Answers
DiElle
07/29/25 11:40pm
After picking up a new car, the following aspects should be noted: 1. Small flaws in the car body paint can only be detected under sufficient light, so it is best to pick up the car in bright sunlight. Some 4S stores may have customers inspect the car indoors, but garages often have poor lighting, so be sure to move the car to a well-lit area for inspection. 2. Pay special attention to the gaps between the bumper and the car body, the door gaps, and the gaps between the front and rear bumpers. Open the doors to check if there is any color difference between the interior and exterior paint. Observe at an angle towards the sunlight and from multiple perspectives. A qualified paint surface should be smooth, free of orange peel or water ripple defects, and there should be no color difference in vulnerable areas such as the bumper and car body, door edges, and left and right exterior rearview mirrors. 3. For metallic and pearlescent paints, you can also judge by observing the uniformity of the aluminum powder or mica particles in the paint. It is important to note that if you are unsure whether some stains on the car are scratches, it is best to use a damp cloth to wipe them off, and avoid scratching with your fingers. 4. Check the lower right corner of the car windows for relevant markings. Only original factory glass will have these marks, preventing the glass from being replaced after leaving the factory.
Was this review help?
11
0
Share
More Forum Discussions

What to Do When There is Abnormal Noise During Car Ignition?

If there is abnormal noise during car ignition, the cause should be checked immediately and repairs should be carried out. The reasons for abnormal noise during car ignition and the corresponding solutions are: 1. Engine abnormal noise. The engine should be repaired promptly to prevent the fault from worsening. 2. Transmission abnormal noise. The car should be sent to a professional repair shop to identify the faulty component and replace it. 3. Wear-induced abnormal noise. Lubricant should be applied to the worn parts in time to prevent the fault from worsening. Additional Information: Methods for maintaining a car engine include: 1. Keep the crankcase well-ventilated. Regularly clean pollutants around the PCV valve. 2. Change the oil and filter regularly to avoid malfunctions. 3. Clean the crankcase periodically to maintain the cleanliness inside the engine. 4. Regularly remove rust and scale inside the engine to prevent excessive buildup that could cause engine blockage.
4
1
Share

Why Can the Driving Test Level 3 Be Taken After Just a Few Days of Practice?

Students who can take the Driving Test Level 3 have already passed the Level 2 test, so they have some driving experience. Moreover, the Level 2 test is indeed quite challenging as it assesses the students' basic skills such as clutch and brake control. Passing it indicates that the students have a solid foundation, making it easier for them to grasp the requirements of Level 3. They only need to familiarize themselves with some test items and road conditions. Here is some additional information: 1. Driving Test Level 3: It is part of the motor vehicle driver's license assessment, officially known as the Road Driving Skills and Safe & Civilized Driving Knowledge Test. 2. Test Content: The road driving skills test generally includes: preparation before starting, light simulation test, starting, driving straight, gear shifting operations, changing lanes, pulling over, going straight through intersections, turning at intersections, meeting other vehicles, overtaking, making U-turns, and night driving. The test content varies depending on the type of vehicle license being applied for.
11
3
Share

How to Set the Horn Sound When Locking a Haval Car?

You can use a computer to access the car's hidden settings and check the corresponding option to activate the horn sound when locking the car. In daily use, you may notice that when locking the car with the remote control, pressing the lock button will cause the car to beep once or the lights to flash twice, serving as a reminder that the car has been successfully locked. Below is an introduction to the Haval H6: 1. The Haval H6 has body dimensions of 4640/1825/1690mm in length, width, and height, with a wheelbase of 2680mm. 2. In terms of safety, the Haval H6 promotes the concept of 'safety without hierarchy,' featuring a standard 71.61% high-strength steel body, hot-formed steel integrated door frames, and six airbags, with the hot-formed steel strength reaching up to 2000Mpa. 3. The Haval H6 is equipped with a 1.5GDIT-EVO engine, with a maximum torque output range expanded to 1400-3600rpm, and is paired with a second-generation 7DCT transmission, achieving a comprehensive transmission efficiency of up to 95.6%.
10
0
Share

Why Do Nearly New Used Cars Cost Much Less Than Brand New Ones?

The reasons why nearly new used cars are cheaper than brand new ones: 1. No need to pay for the 'first time': Nearly new used cars are priced lower than new cars. No matter how new they look, they are still second-hand vehicles. These cars enjoy an immediate 20% discount upon leaving the dealership, and many car owners generally prefer choosing a nearly new used car over the same model brand new. 2. Saving 10% on purchase tax: Buying a used car not only involves simpler procedures but also exempts you from paying the 10% vehicle purchase tax, which is mandatory for new cars. This means a new car depreciates by 10% the moment it's bought, while purchasing a used car saves you this 10% cost since no purchase tax is required. 3. Depreciation of nearly new used cars: These vehicles are often sold just months or even weeks after purchase, usually due to the owner's desire for something newer. Even if they haven't gone through the break-in period, they may still have various uncertain risk factors like accidents or scratches. Buyers have to bear these flaws and uncertainties, which naturally makes nearly new used cars much cheaper than brand new ones.
14
1
Share

Why Do Car Lights Fog Up?

Car lights fog up mainly due to high air humidity, causing water vapor in the air to condense inside the headlights. This fogging is a normal phenomenon. Here are the methods to deal with foggy car lights: 1. Defogging method for fogging caused by physical phenomena: If the headlight "fogging" is due to physical phenomena, car owners need not worry. Simply turn on the headlights normally every day, and the fog should dissipate in about a week. 2. Defogging method for fogging caused by water ingress: First, keep the engine idling, then open the engine hood, unscrew the dust cover or dust cap, and keep the headlights on for about 30 minutes. After that, use an air gun to increase the airflow speed inside the lamp cover until the moisture and fog are completely removed. 3. Defogging method in dry climates: Turn on the headlights to dry the fog inside, then turn off the engine and the headlights. Pour water over areas where leaks might occur, such as the waterproof cover or cap. If fog appears inside the headlights after a few minutes, it indicates a poor seal in that area. Otherwise, the issue lies in the bonding between the lamp cover and the lamp base.
6
0
Share

What Are the Uses of Automotive Antifreeze?

Antifreeze can prevent the coolant from freezing and cracking the radiator or damaging the engine cylinder block or head when the vehicle is parked in cold winter conditions. Antifreeze should not be diluted with water. As a type of alcohol-based chemical reagent, antifreeze is designed to prevent freezing and rust. Adding water can alter its properties and reduce its effectiveness. Functions of antifreeze: Antifreeze is a type of coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and resisting scale and corrosion throughout the year. Composition of antifreeze: The main components of antifreeze are 50% purified water, 40% methanol, and 10% other substances. Types of antifreeze: Antifreeze is generally categorized into three types: ethanol-water, glycerol-water, and ethylene glycol-water. Can different antifreeze brands be mixed? It is necessary to use the same brand of antifreeze. Different brands may have varying production formulas, and mixing them could lead to chemical reactions among the additives, rendering them ineffective.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.