What Should Be Noticed in Subject Two of the Driving Test?

1 Answers
VanJameson
07/29/25 5:49pm
Here are some important points to note for Subject Two of the driving test: 1. Mock Test: The purpose of the mock test is to familiarize the examinee with the test environment and allow the instructor to point out areas where points are easily deducted. Therefore, the mock test is absolutely essential, and being well-prepared is the best way to face the actual test. 2. Ensure Adequate Sleep: Make sure to get a good rest the night before the test to avoid involuntary nervousness or dizziness during the test the next day. 3. Bring Your ID Card: Always bring your ID card when going for the test. Without it, you cannot take the test. After all the preparation, don’t let the absence of an ID card prevent you from taking the test. Additionally, make sure to turn off your mobile phone during the test, as any activity from the phone could be considered cheating.
Was this review help?
7
5
Share
More Forum Discussions

How to Open the Hood of a Mercedes-Benz C200?

To open the hood of a Mercedes-Benz C200: Locate a lever below the left side of the steering wheel and pull it to release the hood. As the outer shell of the car, the primary function of the hood is to protect the internal components, preventing them from being exposed and vulnerable to damage. The dimensions of the Mercedes-Benz C200 are 4784mm in length, 1810mm in width, and 1457mm in height, with a wheelbase of 2920mm. The Mercedes-Benz C200 features rear-wheel drive, with a multi-link independent front suspension and a multi-link independent rear suspension, and a unibody structure.
10
2
Share

Is it necessary to install car door shock-absorbing pads?

It is necessary to install car door shock-absorbing pads. The functions and materials of shock-absorbing pads are introduced as follows: Functions of shock-absorbing pads: They prevent the shock absorber from coming into contact with the car body. When the car turns and the center of gravity shifts to one side, causing the car body to tilt and compress the springs, the pads provide support, thereby reducing the car's body roll. Materials used for shock-absorbing pads: The pads are made of paper, rubber sheets, or copper sheets, serving as sealing materials placed between two surfaces to enhance sealing. They are sealing components set between static sealing surfaces to prevent fluid leakage. They are installed on the car body by adhesion, and the adhesive materials are mostly very mild, so they will not cause damage to the car body surface.
5
5
Share

Is it necessary to install a car static electricity strip?

It is necessary to install a car static electricity strip. The working principle of the static electricity strip and the reasons for static electricity formation are introduced as follows: Working principle of the static electricity strip: The metal wire inside the strip conducts the static electricity from the car to the discharger, which then transmits it to the environment through the air or the ground, eliminating the static electricity in the car. The ground-linked discharger is similar to a reverse radar, fixed at the rear of the car, with the end of the discharger touching the ground, thus directing the static electricity underground. Reasons for static electricity formation: It may be caused by friction between fibrous items in the car, such as carpets, seats, and clothing, or by friction between floating dust in the air and the metal surface of the car body during driving.
13
3
Share

What are the benefits of air-cooled engines?

Benefits of air-cooled engines: No coolant or cooling system is required, making them lighter in weight, easier to maintain, and simpler in structure. However, air-cooled engines also have their own drawbacks, which is why most cars no longer use this type of engine. Most cars are equipped with water-cooled engines, which rely on coolant circulating continuously within the engine to remove excess heat. In water-cooled engines, the coolant follows two circulation paths: a major cycle and a minor cycle. When the engine is first started, the coolant undergoes a minor cycle within the engine, bypassing the radiator for cooling, which helps the engine warm up quickly. Once the engine reaches its normal operating temperature, the coolant switches to a major cycle, passing through the radiator to dissipate heat, thereby maintaining the engine within a normal operating temperature range.
2
1
Share

How many kilometers can a 7250 lithium battery run?

7250 lithium battery can run about 260 kilometers. The related introduction of lithium battery life is as follows: Lithium battery life and charging cycle: The lifespan of lithium batteries is 3-5 years. Lithium batteries have strict charging times, generally around 1000-1200 times. The lifespan of lithium batteries is not related to the number of charges, but to the charge-discharge cycle. Lithium batteries can generally fully charge and discharge 300-500 charging cycles. Beyond this number, the battery cannot be used. Factors determining lithium battery life: These include the characteristics of the system itself, as well as manufacturing processes and usage conditions. A high-quality battery system, combined with scientific system management, can achieve a very long service life.
5
0
Share

What is the seat height of the Kawasaki Z250?

The seat height of the Kawasaki Z250 is 785 mm. In terms of the bike's weight: The dry weight is 154 kg, and the wet weight is 174 kg, which is lighter compared to other models in the same displacement category. In terms of the bike's length: The bike is compact (length of 2025 mm) with a short wheelbase (1416 mm), making it lightweight and easy to handle. Its light weight makes pushing and reversing the bike effortless. With a seat height of 785 mm, it is suitable for shorter riders and offers good maneuverability. This bike is sufficient for daily commuting or weekend leisure rides in the mountains, making it an excellent choice for beginners.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.