What should be noted when temporarily parking?

1 Answers
DeSebastian
07/29/25 3:13pm
When preparing to temporarily park by the roadside, ensure safety and avoid parking against the traffic flow. Below are specific details: Ensure safety: Before parking, when moving the vehicle to the right side of the road, maintain a safe lateral distance from cyclists and pedestrians behind to ensure safety. No parking against traffic: Avoid parking against the traffic flow to prevent disrupting normal vehicle movement. Confirm surrounding safety: After the vehicle is parked and before opening the door, observe the front and rear conditions to confirm safety. Do not obstruct other vehicles or pedestrians. Nighttime: During nighttime and in rain, fog, or snow, always turn on the width marker lights and taillights. No parking in the following areas: Road sections with no-parking signs or markings, areas with barriers separating motor vehicle lanes from bicycle lanes or sidewalks, crosswalks, and construction zones.
Was this review help?
1
4
Share
More Forum Discussions

Is the Subject 4 Exam Waived with a Perfect Score in Subject 1?

Scoring full marks in Subject 1 does not exempt you from taking the Subject 4 exam. Here are the relevant details: 1. Subject 1 is part of the teaching and examination outline for motor vehicle driver training. This outline divides the examination into three subjects, organized by the traffic management department of the public security authorities. The examination sequence follows Subject 1, Subject 2, and Subject 3 in order. Only after passing the previous subject can you proceed to the next. If you fail a subject, you must retake that subject; 2. Subject 1, also known as the theoretical exam or driver theory test, is a component of the motor vehicle driver's license assessment. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the exam content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge.
16
5
Share

Where is the fuse box located in a BMW 320li?

The fuse box of the BMW 320i is located inside the glove compartment on the passenger side. After opening the glove compartment, remove the inner panel to access the fuse box. Additionally, there is another fuse box on the side of the trunk. The steps to replace a fuse in a BMW 320i are as follows: 1. Before inspection, turn off the vehicle and all power sources. 2. Locate the corresponding position, open the protective cover, and you can see the software information inside the fuse box. 3. Use a test pen to check whether the fuse is blown. If it is damaged, remove it with tweezers and replace it. 4. Only fuses with the same current intensity (indicated by the same color and printed text) and the same size can be used for replacement.
13
3
Share

Does Using Snow Mode on Highways Damage the Car?

It can harm the car. Snow mode automatically adjusts the differential bridge, distributing torque evenly to all four wheels, but it operates at lower speeds. Using snow mode at high speeds can easily damage the vehicle. Introduction to Snow Mode: Snow mode is managed by traditional mechanical devices specifically designed for this purpose. Through computer-controlled programming, the transmission starts in second or third gear, ensuring smoother and lower torque output. This reduces the likelihood of tire slippage on slippery snow-covered surfaces. Advantages of Snow Mode: Typically, many cars are equipped with options for "Sport Mode" and "Snow Mode," allowing drivers to select the appropriate driving mode based on environmental conditions to balance driving enjoyment and safety. "Snow Mode" incorporates automated processes, such as starting in second gear, to prevent wheel slippage on icy or slippery surfaces, making it easier to control the car in snowy conditions.
19
4
Share

Why is there no signal in the reversing camera?

Possible reasons include: 1. The data cable connected to the reversing camera is loose or has poor contact. 2. The reversing camera is damaged. 3. A fault in the gear position sensor. Here is some related information about the reversing camera: 1. The reversing camera, also known as the parking assist system, or reversing visual system, or vehicle monitoring system, etc., provides a clear and intuitive view of the rear when reversing, making it one of the most practical configurations for reversing safety. 2. When the reverse gear is engaged, the system automatically activates the high-definition reversing camera located at the rear of the vehicle, displaying the rear view clearly on the reversing LCD screen, allowing for accurate assessment of the road conditions behind.
17
1
Share

What is the horsepower of the 6135 diesel engine?

6135 diesel engine has a maximum horsepower of 172.9KW/2100r. Here is some extended information: 1. Diesel engine: A diesel engine is an engine that burns diesel fuel to obtain energy release. It was invented by the German inventor Rudolf Diesel in 1892. To commemorate this inventor, diesel is represented by the surname Diesel, and the diesel engine is also called a Diesel engine. 2. Advantages of diesel engines: The advantages are high torque and good economic performance. The working process of a diesel engine has many similarities with that of a gasoline engine. Each working cycle also goes through four strokes: intake, compression, power, and exhaust. However, since the fuel used in diesel engines is diesel, which has a higher viscosity than gasoline and is not easy to evaporate, and its auto-ignition temperature is lower than that of gasoline, the formation of the combustible mixture and the ignition method are different from those of gasoline engines.
14
2
Share

Does gasoline evaporate in summer?

Gasoline does evaporate in summer. As a liquid substance, gasoline will evaporate under high temperatures. Here are some related introductions about gasoline: 1. Gasoline grades: The grade of gasoline mainly refers to the ratio of its anti-knock performance to that of standard gasoline (knocking) (standard gasoline is composed of isooctane and n-heptane). The higher the grade, the stronger the anti-knock performance. 2. The difference between 95-grade and 92-grade gasoline: 95-grade gasoline contains 95% isooctane, and the remaining 5% is n-heptane. The higher the proportion of isooctane, the better the anti-knock performance of the gasoline. 92-grade gasoline is more prone to knocking, but with less knocking force; 95-grade gasoline is less prone to knocking, but with greater knocking force.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.