What should be noted when overtaking in Subject Three?

[AmeliaMarie]

After hearing the overtaking instruction, turn on the left turn signal for five seconds, then steer left and drive for 50 meters, paying attention to the distance of the rear vehicle. After turning on the right turn signal for five seconds, return to the original lane. The specific actions should also be adjusted according to the actual situation during the test. Overtaking and meeting are, how to judge the position of the car, meeting and overtaking skills. During driving, the encounter between an upward-moving vehicle and a downward-moving vehicle is called a meeting. The timing and location of the meeting determine whether the two vehicles can pass each other smoothly. If not chosen well, the lightest consequence is failure to pass smoothly, leading to traffic congestion; the worst could result in the two vehicles scraping or colliding with each other, or hitting non-motor vehicles, pedestrians, or roadside isolation facilities. When meeting, first assess whether the meeting can proceed smoothly based on the situation. If the road is narrow, with little room for meeting, or if there are parked vehicles or obstacles on the right front of the road, the right side of the road has soft shoulders, deep ditches, or is close to a mountain, or if there are many pedestrians or non-motor vehicles, handle it with caution. Do not attempt to meet blindly; if necessary, stop first. Secondly, when the meeting can proceed smoothly, strictly follow the relevant regulations on yielding, and do not intentionally occupy the lane or swerve recklessly. Thirdly, pay close attention to any abnormal situations behind the oncoming vehicle to prevent non-motor vehicles or livestock from suddenly darting out from behind the oncoming vehicle, leaving the vehicle no time to dodge.

[StAlina]

During the overtaking maneuver in the driving test (Subject 3), I always feel quite stressed, mainly worrying about making mistakes that could lead to point deductions. In actual operation, you should first check the distance and speed of vehicles behind you through the rearview mirror to ensure there are no rapidly approaching cars. Remember to turn on the left turn signal for at least three to five seconds, wait for the right moment, and then accelerate smoothly to pass the vehicle ahead. Maintain steady steering during the overtaking process—avoid sudden turns or speeding, as the examiner pays close attention to these details. After completing the maneuver, turn off the turn signal, check the right rearview mirror, and safely return to your original lane. A common mistake I made during practice was neglecting blind spot checks, so I developed the habit of turning my head to check blind spots. If the road has solid lines, curves, or no-overtaking signs, absolutely refrain from attempting to pass to avoid failure affecting your score. The entire process should be smooth and orderly to ensure success in the test.

[RiverLynn]

From a safety perspective when overtaking, having driven for over a decade, I deeply understand that risk control is crucial. The first step is assessing road conditions: confirm if it's a straight road with clear visibility and no pedestrians or obstacles. Checking mirrors and blind spots must be thorough, especially for smaller objects like motorcycles which are easily overlooked. After signaling, don't accelerate immediately—allow following vehicles time to react. Maintain sufficient overtaking distance to avoid tailgating risks. Exercise extra caution when returning to your lane, ensuring no vehicles are on your right before changing lanes. Common mistakes include acting without signaling or sudden braking causing accidents; reduce speed significantly during rainy conditions. I share this experience to remind everyone—the overtaking test in License Test Part 3 evaluates safety awareness and habits, so always remain calm and composed.

[VonVera]

During the driving test, when overtaking, I try to simplify the steps. First, check the rearview mirror to see if there are any cars behind and if the distance is sufficient, then turn on the left signal light. After a few seconds, accelerate to overtake, but not too aggressively. Once completed, turn off the signal light and check the right rearview mirror before returning to the original lane. The key is not to panic and follow the examiner's instructions without rushing. This approach is straightforward and saves energy for other parts of the test.

[LeHolden]

In technical terms, overtaking requires precise operation. After checking the rearview mirror to confirm safety, immediately turn on the left turn signal for at least five seconds to ensure clear signal transmission. Accelerate smoothly to pass the vehicle ahead, keeping the speed within the speed limit and maintaining a safe distance from adjacent vehicles. Don’t forget to check blind spots by turning your head to ensure no hidden dangers. After overtaking, decisively turn off the turn signal, check the right rearview mirror again, and safely return to the original lane at the dashed line. The entire process demands full concentration—any interruption, such as being distracted by a phone, could lead to failure. These points are essential in the driving test (Subject 3), and repeated practice will make perfect.

[VanSkylar]

From a rule-following perspective, the overtaking maneuver in Subject 3 must strictly comply with traffic regulations. I ensure to act only when the road has dashed lines and no prohibitory signs, otherwise points may be deducted. Specific steps: First check the rearview mirror to confirm sufficient space from following vehicles; activate the left turn signal for over 5 seconds, then accelerate smoothly to pass the preceding vehicle. After completion, turn off the signal and safely return to the lane after another observation. Common test mistakes include failing to signal, neglecting blind spots, or changing back too soon after overtaking - these not only lose points but violate safety principles. Regular practice should cultivate standardized habits to ensure every operation is lawful and reasonable.