What should be noted when overtaking a bicycle traveling in the same direction?

1 Answers
LaLily
07/30/25 4:01am
Here are the precautions to take when overtaking a bicycle traveling in the same direction: 1. Reduce speed: Observe the dynamics carefully, slow down, and maintain a sufficient safe distance. 2. Turn signal: Activate the turn signal in advance. 3. Visibility: For driving safety, try to avoid blind spots as much as possible. Avoid blocking the rear windshield with objects to maintain good visibility. Adjust the rearview mirror to maximize the field of view, or consider installing a wide-angle rearview mirror inside the car. These methods can help minimize blind spots.
Was this review help?
1
5
Share
More Forum Discussions

How to Use Cruise Control in Volkswagen CC?

Method to set cruise control in Volkswagen CC: When the vehicle speed reaches above 40 km/h, turn on the cruise control switch, then press the deceleration button to activate the cruise function; stepping on the brake will automatically deactivate the cruise control. Below is more information about using cruise control in Volkswagen CC: 1. The cruise control system in Volkswagen CC only works when the vehicle speed is above 40 km/h. 2. After activating the cruise control system, when the car reaches the desired speed, press the "SET" button to maintain this speed continuously. After setting the cruise speed, you can still accelerate using the accelerator pedal as usual. When you release the accelerator pedal, the system will restore the speed to the set cruise speed. However, if after acceleration, the speed exceeds the cruise speed by more than 10 km/h and maintains this speed for more than 5 minutes, you must reset the cruise speed. 3. To safely deactivate the cruise control system, slide the switch to the "OFF" position, or when the car is stationary, turn off the ignition switch. This will clear all stored values in the cruise system and completely shut it down. To reactivate the cruise system, when the speed is above 30 km/h, place the cruise switch to the "ON" position and reset the cruise speed.
20
1
Share

Where is the USB port of the Qoros 5?

The USB port of the Qoros 5 is located inside the center armrest. Additional information about the USB port is as follows: 1. The USB port is a type of vehicle transmission line, generally a universal interface for connecting USB devices such as flash drives and MP3 players. Advantages include fast transmission speed, ease of use, support for plug-and-play, flexible connectivity, and independent power supply. 2. If the vehicle is on a bumpy road, vibrations may cause unstable USB connections, leading to disconnections. Simply wait for the system to reconnect or reinsert the USB device. 3. Keep the USB port clean and tidy. If there is rust, water stains, small debris, or other foreign objects in the USB port, it may prevent the USB device from connecting properly.
6
0
Share

What are China 6 and China 5 vehicles?

China 6 vehicles refer to cars that comply with the National Sixth Stage Emission Standards for motor vehicle pollutants, while China 5 vehicles refer to those that meet the National Fifth Stage Emission Standards. Below are the differences between China 5 and China 6 emission standards: 1. Different emission standards: China 6 standards are more than 30% stricter than China 5. Under the same driving conditions and test influences, gasoline vehicles under China 6 reduce carbon monoxide emissions by 50%, total hydrocarbons and non-methane hydrocarbons by 50%, and nitrogen oxide emissions by 42%. Additionally, China 6 standards introduce new regulations for PN (particulate number) particle emissions. 2. China 6 standards enhance monitoring requirements for plug-in hybrid electric vehicles. These requirements cover eight aspects: energy storage systems, thermal management systems, brake regeneration, drive motors, generators, plug-in EES (electrical energy storage), other input or output modules, and exemption requirements for certain plug-in components.
9
1
Share

How to Remove Cement Stains from the Car Body?

Methods to remove cement stains from the car body: 1. If the cement has not hardened yet, you can directly rinse it off with clean water, then use a towel with cleaning solution to wash it. 2. If the cement has already hardened, you can spray white vinegar or a specialized cement cleaner on the cement, wait for the cement to soften, and then rinse it off with plenty of clean water; white vinegar is an acidic liquid that can effectively dissolve cement. Pour white vinegar on the cement attached to the car, wait a few minutes for the cement to soften, and then it will be easier to clean. 3. If the cement cannot be rinsed off cleanly or the car paint already has scratches, it is recommended to hand it over to a car beauty shop for treatment.
13
0
Share

How to Switch Between High and Low Beams?

Car headlights generally come in two types: low beams and high beams. The method to switch between them is as follows: 1. On the left side of the steering wheel, there is a set of light combination switches. At night, rotating the combination switch forward one notch turns on the dashboard lights, and rotating it another notch turns on the low beams. 2. Low beams should be used at night when there are streetlights on the road, when encountering pedestrians on the roadside, or when driving on narrow roads, narrow bridges, or curves. 3. High beams should be used at night when there are no streetlights or when the road is straight and visibility is poor. Rotating the switch forward one more notch activates the high beams. 4. When meeting another vehicle at night, if the high beams are on, they must be turned off until the oncoming vehicle has passed. Failing to do so may blind the other driver and cause an accident, which is also a standard of civilized driving. 5. At night, when approaching an intersection, flash the headlights twice by switching between high and low beams. In low beam mode, lifting the combination light switch upward temporarily activates the high beams, and releasing it returns the switch to low beam mode.
19
0
Share

How to Remove the Rear Seat Cushion of the Ford Escort?

The rear seat cushion of the Ford Escort has a buckle on each side. Simultaneously pull the buckle handles and lift upwards to remove the rear seat cushion. More information about the Ford Escort is as follows: 1. The Ford Escort is based on Ford's globally acclaimed advanced mid-size platform, integrating Ford's most cutting-edge design and R&D resources worldwide. With a bold and progressive design, it is a brand-new mid-size family sedan specifically tailored for Chinese household users. 2. The Ford Escort is equipped with Ford's advanced 1.5L Ti-VCT four-cylinder engine, delivering smooth power output and excellent fuel economy. 3. By using higher-quality interior materials, providing spacious rear legroom, and incorporating design elements often seen in luxury brands, the Ford Escort creates a warm, spacious, and refined interior space.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.