What should be noted when first obtaining a driver's license?

What are the new regulations for annual vehicle inspection?

Annual inspection new regulations cover a wide range of areas, the following sections provide details: Expanded exemption scope for private vehicles: On the basis of exempting non-operational mini and micro passenger vehicles with 6 or fewer seats from inspection within 6 years, non-operational mini and micro passenger vehicles with 7 to 9 seats within 6 years are now included in the exemption scope. For non-operational mini and micro passenger vehicles older than 6 years but less than 10 years, the inspection frequency is adjusted from once per year to once every two years. Electronic inspection labels: Starting from March 1, 2020, 16 cities including Beijing, Tianjin, Shanghai, Chongqing, Harbin, Nanjing, Hangzhou, Ningbo, Jinan, Zhuzhou, Shenzhen, Haikou, Chengdu, Guiyang, Yuxi, and Urumqi became the first batch of pilot cities for electronic motor vehicle inspection labels.

4

0

Share

What are the differences between BMW 320i and 320Li?

The differences between BMW 320i and 320Li are as follows: 1. Different car types: The 320Li is a domestically produced car, while the 320i is an imported car. 2. Different body lengths: The 320Li is 110mm longer than the 320i. 3. Different selling prices: The 320Li is more expensive than the 320i. Information about the BMW 320i and 320Li is as follows: 1. 'L' is the first letter of the English word 'Long', representing length, indicating that the vehicle is a model with an extended wheelbase. The wheelbase of a car mainly refers to the distance between the center of the front axle and the center of the rear axle. 2. Compared to the BMW 320i and BMW 320Li models, the BMW 320Li has an ultra-long wheelbase, providing a larger interior space, especially a relatively larger rear seating area.

9

1

Share

Where is the OBD port on the Touran?

Location of the Volkswagen Touran OBD interface: It is located behind the plastic cover under the steering wheel. First, open the driver's glove box, then remove the glove box, and you will see the OBD interface on the right side behind the glove box. Here is some related information about OBD: 1. OBD is the abbreviation for On-Board-Diagnostic, which translates to "On-Board Diagnostics" in Chinese. This system continuously monitors the engine's operating conditions and the working status of the exhaust after-treatment system. If it detects any situation that may cause excessive emissions, it will immediately issue a warning. 2. When a fault occurs in the system, the Malfunction Indicator Lamp (MIL) or Check-Engine warning light will illuminate. At the same time, the OBD system will store the fault information in the memory. The relevant information can be read in the form of fault codes through standard diagnostic tools and interfaces. Based on the fault codes, maintenance personnel can quickly and accurately determine the nature and location of the fault.

2

5

Share

Where is the ESP switch of Audi A6L?

The ESP switch of the Audi A6L is located below the air conditioning screen on the center console. The ESP can be temporarily turned off under the following circumstances: 1. When the vehicle is stuck in mud. The ESP system reduces engine torque, which can exacerbate wheel slippage. 2. During extreme driving. Actions such as drifting around corners or performing a launch start require a certain degree of slippage, making it necessary to turn off the ESP. 3. On roads with deep snow. On slippery snow-covered roads, the tires already have insufficient grip. If the ESP continues to intervene, it will only cause the wheels to sink deeper. However, when the snow is just beginning to melt, remember not to turn off the ESP, as this could lead to even more severe slippage. 4. When snow chains are installed on the tires. Changes in the tire's outer diameter may cause the sensors to mistakenly interpret this as a tire malfunction, leading the ESP to continuously issue warnings, which can affect driving.

8

5

Share

Can vehicle inspection be done in another city?

Vehicle inspection can be done in another city. More information about vehicle inspection in another city is as follows: 1. The most important document for vehicle inspection in another city is the Power of Attorney for Vehicle Inspection in Another City. When you need to have your vehicle inspected in another city, the first step is to obtain this Power of Attorney. Then, take the Power of Attorney along with the relevant inspection documents to the vehicle management office in the designated city to process the vehicle inspection. To apply for the Power of Attorney for Vehicle Inspection in Another City, you need to bring the vehicle owner's ID card, vehicle license, vehicle insurance documents, original and photocopy of the vehicle and vessel tax, and an application for cross-region inspection to the vehicle management office in the registration city. 2. For the vehicle inspection, you need to bring the vehicle license, vehicle insurance documents, and the Power of Attorney for Vehicle Inspection in Another City to the vehicle management office in the designated city. During the inspection process, it is important to note that the vehicle must not have any outstanding traffic violations, otherwise, the normal inspection cannot be conducted.

15

5

Share

Where is the Car's Charcoal Canister Located?

Automobile charcoal canister is located between the car engine and the fuel tank. Here are the relevant details about the charcoal canister: 1. Function: When the engine is running and the solenoid valve is activated, the engine draws fuel vapor from the fuel tank and the vapor adsorbed by the active material into the intake manifold. When the engine is not running or the solenoid valve is not activated, the vapor from the fuel tank enters the charcoal canister and is absorbed by the active material. 2. Working Principle: When the engine is running and reaches medium to high speed, the solenoid valve is energized, opening the pipeline. The vacuum in the engine's intake manifold then draws the combustible gas from the charcoal canister into the cylinders to participate in combustion. Simultaneously, external air enters the charcoal canister through the breathing hole, flows through the internal absorption layer, mixes with the fuel to form combustible gas, and then flows into the engine's intake pipe. During this process, the activated charcoal in the canister is gradually restored due to the suction effect of the engine.

16

1

Share

What should be noted when first obtaining a driver's license?

What are the new regulations for annual vehicle inspection?

What are the differences between BMW 320i and 320Li?

Where is the OBD port on the Touran?

Where is the ESP switch of Audi A6L?

Can vehicle inspection be done in another city?

Where is the Car's Charcoal Canister Located?

What is the fuel consumption of the Kawasaki Z900?

How to Deal with Deliberate Refusal to Move a Vehicle?

What taxes need to be paid for a new car?

What are the differences between the Golf R and GTI?