···
Log in / Register

What should be noted when driving a motor vehicle through school areas?

4 Answers
Stuart
09/06/25 6:09am
When driving a motor vehicle through school areas, pay attention to observing traffic signs and markings, slow down, and avoid honking. Honking is prohibited in school zones. When driving through school areas, it is essential to slow down promptly, observe traffic signs, markings, and the conditions on both sides of the road and surroundings, and always be vigilant for students crossing the road. The following are precautions for driving on highways: Safety Check: Before getting in the car, check for potential safety hazards. Before driving on the highway, inspect the vehicle for any safety issues. Seat Belts: Always wear seat belts on the highway, including the driver, front passenger, and rear seats. Avoid placing loose items in the car.
Was this review help?
7
3
Share
DiAubrey
09/18/25 5:56am
I've been driving for over twenty years, and I always stay extra vigilant when passing by schools. Especially during peak hours when children are coming to or leaving school, they tend to be lively and playful, often running around near the roadside or suddenly crossing the street. I always make sure to slow down to under 30 km/h. I've seen too many accidents caused by distracted or speeding drivers, so now it's a habit for me to slow down in advance, carefully observe roadside signs and speed bumps, and leave enough reaction time. When visibility is poor, such as on rainy or hazy days, I drive even slower, turn off the music, and focus entirely on the road. When passing a school bus, I always stop and wait for the children to get on or off safely. In short, safety comes first. Children's lives are precious, and there's no room for carelessness. Waiting a few extra seconds could prevent a major disaster.
Was this review help?
20
2
Share
Expand All
SanIris
11/01/25 6:22am
As a father of two, I'm particularly sensitive to traffic in school zones. The most crucial thing for drivers is to slow down and not exceed 20 kilometers per hour. During dismissal times, students gather in groups, which can easily block visibility. I constantly remind myself to stay fully focused on both sides of the road, especially near playgrounds. Children might run out while playing or cross the street unexpectedly, so you should always be ready to brake. I recommend turning off your phone to avoid distractions and keeping noise in the car to a minimum. On hot days, children tend to be more active, so maintaining steady speed control ensures everyone's safety and gives parents more peace of mind when picking up or dropping off their kids.
Was this review help?
10
2
Share
Expand All
OAdriana
11/01/25 6:24am
Community safety is my top concern. When driving past schools, it's crucial to strictly adhere to speed limits, typically 20-30 km/h. Reducing speed significantly lowers accident risks, especially during peak child activity periods like school opening seasons or weekend events. I always emphasize the importance of watching for pedestrian crossings and avoiding honking to prevent startling children or school buses. Additionally, paying attention to road signs and reflective devices ensures clear visibility. Safe driving isn't just about compliance with regulations—it's a collective responsibility. Every driver should consciously protect the school environment and safeguard the next generation's safe growth.
Was this review help?
9
4
Share
Expand All
More Forum Discussions

What Factors Influence the Operating Speed of Vehicles?

Insufficient engine power and transmission issues. Below is an introduction regarding operating speed: 1. Introduction: Operating speed refers to the average distance traveled per hour by a vehicle during operation. The magnitude of operating speed is not only influenced by technical speed but also depends on factors such as the quality of transportation organization, the distance of transportation, and the duration of loading and unloading stops. Under a certain technical speed, the operating speed is directly proportional to the utilization coefficient of operation time. The relationship between them is: Operating speed = Technical speed × Utilization coefficient of operation time. 2. Related Concepts: Technical speed: The average distance traveled per hour by a vehicle during operation time. Technical speed is essentially the driving speed of the vehicle. Objective factors such as vehicle power performance, road conditions (e.g., surface, width, gradient, curves, visibility), characteristics of the transported goods, traffic density, vehicle load capacity, as well as vehicle maintenance quality and driver proficiency, all influence technical speed. To enhance transportation efficiency, it is essential to improve technical speed under permissible conditions.
5
0
Share

What fuel do green vehicles use?

Green vehicles use compressed natural gas as fuel. Green vehicles, also known as environmentally friendly vehicles, refer to automobiles that produce little or no pollution. Specifically, these vehicles are designed to minimize environmental impact throughout their entire lifecycle—from production to disposal—by emitting no pollutants, producing minimal noise, and ensuring that materials from scrapped vehicles can be recycled or regenerated without causing secondary pollution. Green vehicles must meet certain international standards regarding production facilities, energy sources, exhaust emissions, and the entire process from manufacturing and sales to recycling. Additionally, they must comply with environmental, production technology, and safety requirements.
13
3
Share

What is the tire model of the Cadillac ATS-L?

Cadillac ATS-L's tire models are 225/40R18 and 255/35R18, where 225 indicates the tire width is 225mm, 40 and 35 represent the aspect ratio of 40% and 35% respectively, R stands for radial tire, and 18 denotes the rim diameter of 18 inches. Taking the 2017 Cadillac ATS-L as an example, it belongs to the mid-size car category with body dimensions of: length 4730mm, width 1824mm, height 1426mm, wheelbase 2860mm, front track 1535mm, rear track 1578mm, minimum ground clearance 117mm, fuel tank capacity 62L, and trunk capacity 289L.
16
0
Share

How to Start and Drive an Automatic Transmission Car with Push-Button Ignition?

Automatic transmission push-button ignition starting and driving steps are: 1. After sitting in the driver's seat, press the start button once to light up the ACC indicator, then press again for vehicle self-check; 2. Depress the brake pedal and press the push-button ignition to start the engine; 3. Release the foot brake - you may choose to warm up the engine; 4. Depress the brake pedal again, shift to D gear and release the parking brake (for electronic parking brake, simply press the button briefly); 5. Gradually release the foot brake to complete starting. The correct parking method for automatic transmission is: 1. Upon reaching parking position, maintain brake pressure until vehicle comes to complete stop; 2. Shift gear lever to N position without releasing the brake; 3. Engage parking brake, then release foot brake; 4. After ensuring full stop, depress brake again and shift to P gear before locking and exiting the vehicle.
12
4
Share

Is the Tiguan a product of FAW-Volkswagen?

The Tiguan is not a product of FAW-Volkswagen; it is a model under SAIC Volkswagen, categorized as a compact SUV. Taking the 2017 Tiguan as an example, it is a compact SUV with the following dimensions: length 4506mm, width 1809mm, height 1685mm, wheelbase 2684mm, and a curb weight of 1600kg. The 2017 Tiguan features a front MacPherson strut independent suspension and a rear multi-link independent suspension. It is powered by a 1.8T turbocharged engine, delivering a maximum horsepower of 160PS, a maximum torque of 250Nm, and a maximum power output of 118kW. It is paired with a 6-speed automatic transmission.
15
5
Share

What kind of car is the LaFerrari?

LaFerrari is a limited-edition supercar from Ferrari, with only 499 units produced. The dimensions of the LaFerrari are: length 4702mm, width 1992mm, height 1116mm, wheelbase 2650mm, fuel tank capacity 95l, and curb weight 1255kg. The LaFerrari features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is powered by a 6.0L naturally aspirated engine, delivering a maximum horsepower of 800PS, maximum power of 588kW, and maximum torque of 700Nm, paired with a 7-speed dual-clutch transmission.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.