···
Log in / Register

What should be noted when driving a motor vehicle following the preceding vehicle to make a right turn?

3 Answers
McValeria
07/30/25 12:36am
When driving a motor vehicle following the preceding vehicle to make a right turn, the following should be noted: 1. The preceding vehicle: The preceding vehicle may stop to yield to pedestrians or non-motorized vehicles at the intersection; 2. Crosswalk: Pedestrians may suddenly enter the crosswalk; 3. Blind spots: The right side is the non-motorized vehicle lane, and there may be non-motorized vehicles moving straight within the blind spots. More relevant information is as follows: 1. Turn signal: Before changing lanes for a right turn, the turn signal should be activated in advance. This mainly serves as a warning to vehicles behind, as well as electric vehicles, bicycles, and pedestrians. 2. Observe straight-moving vehicles on the left: Before making a right turn, observe the straight-moving vehicles on the left. Checking related accident cases reveals that most accidents occur when drivers neglect to observe straight-moving vehicles while making a right turn, leading to collisions.
Was this review help?
15
3
Share
GenevieveDella
08/15/25 5:29am
When following the car in front to make a right turn, what I'm most concerned about is the car ahead suddenly slowing down. Especially on rainy days when the road is slippery, if the car in front brakes hard, it's easy to rear-end them. I leave an extra one or two seconds of safety distance—being able to see the rear wheels of the car ahead is about right. While turning, don't just focus on the car in front; glance at the rearview mirror to check for any e-bikes squeezing in, and also look at the sidewalk for pedestrians rushing through a yellow light. Don't turn the steering wheel too sharply, or you might scrape the curb. Last week, a delivery guy overtook from the right side and nearly scraped my car—it really gave me a scare.
Was this review help?
4
4
Share
Expand All
VioletMarie
10/20/25 2:12am
I pay extra attention to turn signals when making a right turn. Some drivers turn on the right signal but go straight, and by the time you realize it, it's too late. Always confirm that the car in front is actually slowing down and moving to the right before turning—don't be fooled by fake maneuvers. I usually move to the far-right lane about 50 meters in advance to reduce the risk of lane changes. Blind spots are common at intersections, and those shared bikes suddenly darting out are the most dangerous. When turning, I tilt my head to get a better view of the road conditions for peace of mind. Ease off the throttle and use second gear to maintain a steady speed through the turn for the safest approach.
Was this review help?
16
4
Share
Expand All
More Forum Discussions

Which is More Fuel-Efficient: Turbocharged or Naturally Aspirated Engines?

In urban driving conditions, naturally aspirated engines are more fuel-efficient, while turbocharged engines perform better on highways. Below are the differences between turbocharged and naturally aspirated engines: 1. Power: With the same displacement, turbocharged engines deliver stronger power than naturally aspirated ones. 2. Maintenance: The higher power output of turbocharged engines may lead to faster performance and reliability degradation compared to naturally aspirated engines, resulting in higher maintenance costs over time. 3. Fuel Consumption: Under the same displacement, turbocharged engines tend to have worse fuel efficiency than naturally aspirated engines in city driving. However, they are more fuel-efficient on highways. 4. Manufacturing Cost: Turbochargers introduce an additional component, and due to their high-temperature, high-pressure working environment, they require higher-grade materials and precision manufacturing, making turbocharged engines more expensive than naturally aspirated ones.
12
2
Share

What is the remote control matching method for Mazda 6?

Mazda 6 key matching method is as follows: 1. Close all doors and open the driver's side door. 2. Insert the key into the ignition switch and complete three operations of turning the ignition switch on and off within 5 seconds. 3. Then close and open the door three times. On the third time the door is opened, the door lock switch will activate once. 4. Press the lock button on the remote twice, and the door lock switch will activate once again. 5. Remove the key, the door lock switch will activate twice, and the alarm horn will sound twice, indicating that the remote control matching is successful. Here is another method for Mazda 6 key matching: Mazda 6 can also choose to go to a 4S shop for matching. Using the 4S shop's dedicated computer and vehicle connection, the engine number, frame number, production year and other information of the vehicle can be read out, and then the password matching can be performed. After the smart card is matched, the key can be matched.
16
3
Share

What is the working principle of car air conditioning?

The working principle of car air conditioning mainly consists of the following four processes: 1. Compression process: The compressor sucks in the low-temperature and low-pressure refrigerant gas at the outlet of the evaporator and compresses it into high-temperature and high-pressure gas, which is then discharged from the compressor. 2. Heat dissipation process: The high-temperature and high-pressure superheated refrigerant gas enters the condenser, where it condenses into a liquid due to the reduction in pressure and temperature, releasing a large amount of heat. 3. Throttling process: The higher-temperature and higher-pressure refrigerant liquid passes through the expansion device, causing its volume to increase, and its pressure and temperature to drop sharply, exiting the expansion device in a mist form (fine droplets). 4. Heat absorption process: The mist-like refrigerant liquid enters the evaporator, where, since the boiling point of the refrigerant is much lower than the temperature inside the evaporator, the refrigerant liquid evaporates into a gas. During the evaporation process, it absorbs a large amount of surrounding heat, and then the low-temperature and low-pressure refrigerant vapor re-enters the compressor. This cycle repeats continuously, thereby achieving the purpose of lowering the temperature of the air around the evaporator.
8
4
Share

Where is the Insurance and Vehicle and Vessel Tax Certificate?

"Compulsory Traffic Insurance Policy" serves as the "Vehicle and Vessel Tax Certificate." Currently, the vehicle and vessel tax paid when purchasing a car is generally bundled with compulsory traffic insurance. Therefore, when purchasing compulsory traffic insurance, the vehicle and vessel tax must also be paid in full, and the invoice is issued on the same document. More information about the Vehicle and Vessel Tax Certificate is as follows: 1. The Vehicle and Vessel Tax Certificate is usually listed separately in the "Withholding Vehicle and Vessel Tax" section at the bottom right corner of the compulsory traffic insurance policy, showing the amount of tax paid, which is officially recognized. 2. Photo of the 12123 Vehicle and Vessel Tax Certificate. The photo of the Vehicle and Vessel Tax Certificate is mainly used to apply for an inspection-exempt label on the "Traffic Management 12123" mobile app. Many car owners are unsure where to take this photo. In fact, the Vehicle and Vessel Tax Certificate is included in the compulsory traffic insurance policy. Simply take out the compulsory traffic insurance policy and clearly photograph the information in the "Withholding Vehicle and Vessel Tax" section to submit it.
7
3
Share

What Causes Shaking When an Automatic Transmission is in D Gear?

Shaking when an automatic transmission is in D gear originates from the transmission because the gear is in D, which is the power connection state. Precautions for driving an automatic transmission: 1. The S gear is not a cure-all. Typically, the S gear is used when overtaking at high speeds. 2. For prolonged stops at red lights, use the foot brake. If waiting at an intersection for an extended period, it's advisable to shift the car into N gear and engage the handbrake. Keeping the foot on the brake for too long can cause the fuel temperature in the transmission to rise excessively. 3. Frequent pressing of the accelerator consumes more fuel. If the driver deliberately presses the accelerator hard during normal driving, the automatic transmission's computer may interpret this as a need to accelerate for overtaking, thus downshifting to increase torque. Frequently pressing the accelerator hard not only increases fuel consumption but also accelerates abnormal wear on the automatic transmission gearbox.
17
1
Share

What is the tire model number?

Tire model numbers are mostly marked in the format like: 215/70R15. The meanings of these numbers are as follows: 1. 215 indicates the tire section width, the unit is mm. Generally, tire widths range between 145—285mm, with intervals of 10mm; 2. 70 is the aspect ratio, which is the ratio of the tire sidewall height to the tire section width; 3. 70 represents 70%. Generally, tire aspect ratios range between 30%—80%. 4. Under normal circumstances, ordinary cars should not use tires with an aspect ratio >75%, while luxury cars and high-performance sports cars are recommended to use tires with an aspect ratio <60%; 5. R is the abbreviation for Radial, indicating the tire has a radial structure, and 15 is the rim diameter, the unit is inches.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.