What should be noted when changing lanes on the road?

2 Answers
DiJulianna
07/23/25 8:52pm
Precautions for changing lanes: 1. Observe the side situation of the vehicle: When intending to change lanes, in addition to observing the rear of the vehicle, it is also necessary to observe the side situation of the vehicle to confirm whether there are parallel vehicles on the side of your vehicle. If there are parallel vehicles in the lane you intend to change to, you must not force a lane change. 2. Strengthen the observation of the rear situation: When preparing to change lanes, the driver must observe the situation behind the vehicle through the rearview mirror to confirm whether there are any vehicles and if it is safe. 3. Signal the lane change: After observation, if it is confirmed that there are no vehicles behind, to the side rear, and in the lane you intend to change to, and it is safe to change lanes, the driver should then signal the intention to change lanes. 4. Change lanes: The driver signals the intention to change lanes, waits for the driver of the vehicle in front to give a signal to yield, and makes a yielding gesture. After confirming safety, the driver should accelerate to pass, then continue to accelerate for a distance before returning to the original lane.
Was this review help?
6
3
Share
Boromir
08/10/25 6:45pm
I've been driving a taxi for nearly ten years, and changing lanes may seem simple but should never be taken lightly. The first thing I do is turn on the turn signal—not just a quick flash, but signaling for at least three seconds to alert other drivers. Then, I carefully check the rearview mirror to ensure no vehicle is too close behind, paying extra attention to blind spots. I often turn my head to check the side windows because some areas are completely invisible in the mirrors. Maintaining a safe distance is crucial, especially on highways—I always estimate the speed difference: if a car is speeding up behind me, I never force a lane change. In rainy weather or low-light conditions at night, I slow down my actions and make sure my visibility is clear before moving. Keeping a steady speed is also key; going too fast increases the risk of a rear-end collision, while driving too slowly can be unsafe. Practicing these habits every time I drive has turned them into instinct, naturally reducing accident risks. I also stay alert to traffic signals and road signs—for example, never attempting lane changes on curves or at intersections.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

What does safecp mean?

safe means safety, cp is the confirmation of instrument control on the vehicle. Below is the relevant introduction: Front and rear fog light indicators: These indicators are used to display the working status of the front and rear fog lights. When the fog lights are turned on, both lights illuminate. The left side in the image shows the front fog light, and the right side shows the rear fog light. Turn signal indicators: When the turn signal is activated, the corresponding indicator flashes at a certain frequency. When the hazard warning lights button is pressed, both lights illuminate simultaneously. The indicator automatically turns off after the turn signal is deactivated. High beam indicator: Shows whether the headlights are in high beam mode. Normally, this indicator is off. It illuminates when the high beam is activated on the dashboard and when the high beam flash function is used.
13
0
Share

Is SAE Fully Synthetic Oil?

SAE is not necessarily fully synthetic oil. Here is the relevant introduction: Oil classification: Motor oil can be divided into fully synthetic oil, semi-synthetic oil, and mineral oil based on quality grades. The best quality is fully synthetic oil, followed by semi-synthetic oil, and the lowest quality is mineral oil. 5w30 oil is not entirely fully synthetic oil because all three types of oil share this oil specification. Characteristics of fully synthetic oil: Fully synthetic oil has better high and low-temperature performance; it has a longer oil change interval; it is suitable for more severe vehicle conditions. Differences between synthetic and semi-synthetic oil: Synthetic oil is a product of modern chemical technology advancements. Synthetic oil has many advantages. For example, synthetic oil has higher lubricity than mineral oil, lower friction resistance, is less prone to oxidation, and has stronger cleaning properties. Fully synthetic oil can be used over a wider temperature range and has a longer service life; for the same oil film requirements, synthetic oil can achieve this with lower viscosity, while semi-synthetic oil requires a relatively higher viscosity to meet the same requirements.
10
1
Share

What brand of engine is sinotruk?

sinotruk is an engine brand under China National Heavy Duty Truck Group. Below is relevant information: Advantages: simple structure, high horsepower, low fuel consumption. The automobile engine is the device that provides power for vehicles, serving as the heart of a car that determines its power performance, fuel economy, stability and environmental friendliness. Engine classification: According to different power sources, automobile engines can be divided into diesel engines, gasoline engines, electric vehicle motors and hybrid power systems. Differences between gasoline and diesel engines: Gasoline engines feature higher rotational speed, lighter weight, lower noise, easier starting and lower manufacturing costs; Diesel engines have higher compression ratios and thermal efficiency, with better fuel economy and emission performance than gasoline engines.
15
4
Share

What does S-CVT mean?

S-CVT can be understood as an improved version of the CVT transmission, inheriting the advantages of CVT while also addressing its shortcomings. Below is a related introduction: Introduction: CVT refers to a type of automotive transmission, also known as a continuously variable transmission. The difference between CVT and stepped transmissions is that its gear ratio is not a series of discrete points but a continuous range of values, thereby achieving good fuel economy, power performance, and smooth driving, while also reducing emissions and costs. Principle: Its principle differs from that of a conventional transmission, where several sets of gears of varying sizes engage and disengage under control to form different gear ratios. Instead, it operates similarly to a bicycle's pedal system, where the chain drives the wheel at different speeds via large and small sprockets. Due to varying forces applied to different sets of gears, the thrust generated differs, causing the transmission's output speed to change accordingly, thus achieving seamless and gradual rotation without distinct gear shifts.
9
2
Share

What is the SR motorcycle?

SR refers to the CFMoto 250SR motorcycle. The dimensions of this motorcycle are 2010mm in length, 750mm in width, and 1080mm in height, with a wheelbase of 1360mm. It is equipped with a single-cylinder, four-stroke, liquid-cooled 250cc engine, delivering a maximum horsepower of 27.9ps, a maximum power of 20.5kw, and a maximum torque of 22nm. The valve configuration is DOHC with four valves per cylinder, and it operates on a four-stroke cycle. Additional specifications: The seat height of the CFMoto 250SR is 780mm, paired with an international 6-speed transmission. The curb weight is 165kg, the fuel tank capacity is 12L, the cooling system is liquid-cooled, the fuel supply system is electronic fuel injection, and it requires 95-octane fuel.
16
2
Share

What does T700 carbon fiber mean?

T700 refers to the grade of carbon fiber. It is typically measured by tensile strength indicators. T700 must achieve a tensile strength of 4.9Gpa. Currently, only 12k carbon fiber can meet the T700 standard. Additional information: Carbon fiber is a new type of fiber material with a carbon content of over 95%, known for its high strength and high modulus. The 'T' number in carbon fiber denotes the grade of the carbon material. Within the industry, it specifically refers to a certain type of carbon material produced by Toray Industries of Japan, while outside the industry, it generally refers to ultra-high precision carbon materials. The 'T' number indicates the tensile tonnage that a unit quantity of this type of carbon fiber with a cross-sectional area of 1 square centimeter can withstand. Therefore, generally speaking, a higher 'T' number represents a higher grade and better quality of carbon fiber.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.