···
Log in / Register

What Should Be Noted in New Energy Vehicle Maintenance?

3 Answers
GarrettRose
09/04/25 5:05am
When maintaining a new energy vehicle, the following points should be noted: 1. Correctly grasp the charging time. Avoid over-discharging, and the charging time should not be too long. Overcharging can cause the battery to heat up and shorten its lifespan. 2. Protect the charger. During charging, ensure the charger is well-ventilated; otherwise, it may affect the charger's lifespan and potentially damage the battery. 3. Maintain sufficient power. After daily use of the new energy vehicle, necessary charging is required to keep the car battery fully charged. 4. Cleaning the electric vehicle. When cleaning, be careful to prevent water from entering the charging socket inside the vehicle and ensure waterproofing. 5. Keep the power sufficient. Maintain the battery's charging state and control the vehicle speed. 6. Avoid overheating of the plug during charging. Loose power plugs or charger output plugs, oxidized contact surfaces, and other phenomena can cause the plug to overheat. Prolonged overheating may lead to short circuits or poor contact, damaging the charger and battery.
Was this review help?
15
1
Share
AveryDella
09/16/25 6:06am
After five years of driving a new energy vehicle, I believe safety should be the top priority in maintenance. The battery is crucial—regularly check its condition to avoid deep discharge or overcharging, which could lead to overheating or fire. The cooling system requires timely fluid replacement to maintain stable battery temperature, especially during hot summers when issues are more likely. Brake maintenance includes inspecting the regenerative braking components to ensure reliable braking performance, giving peace of mind when driving in the rain. Software updates must be kept up-to-date; for example, OTA upgrades can fix vulnerabilities and prevent functional failures while driving. When charging, keep the port clean to avoid damage from debris and extend its lifespan. Tire wear also affects battery efficiency—check tire pressure monthly for convenience and safety. In short, regular maintenance prevents roadside breakdowns. I insist on professional inspections every six months—spending a little extra is worth it for peace of mind.
Was this review help?
12
5
Share
Expand All
CarlosDella
10/30/25 6:41am
As an ordinary office worker, I believe the key to maintaining a new energy vehicle lies in saving money and hassle. Don't wait until the battery is nearly dead to address issues – regularly check its health status to avoid costly major repairs. Take advantage of free diagnostics offered by manufacturers. Charging habits significantly impact battery lifespan; home slow charging is more economical than fast charging and can extend usage by several years. For consumables like coolant and brake fluid, opt for reputable brands to avoid expensive repairs later. Tires significantly affect energy consumption – maintaining proper pressure can add extra kilometers. Don't neglect software updates; address minor issues promptly. Simple maintenance tasks like adding windshield washer fluid can be done yourself to save time and effort. Following these practices keeps maintenance costs low, ensures comfortable driving, saves fuel expenses, and proves highly cost-effective.
Was this review help?
14
4
Share
Expand All
More Forum Discussions

What is the on-board charging voltage?

The on-board charging voltage is 12V. The functions of a car battery are: 1. To power the starting system, ignition system, electronic fuel injection system, and other electrical equipment during engine startup; 2. To supply power to vehicle electrical equipment when the engine is off or idling at low speed; 3. To participate in power supply when electrical demand exceeds the generator's capacity; 4. To mitigate voltage surges in the electrical system and protect electronic devices in the vehicle; 5. To store excess electricity generated by the alternator. Maintenance methods for car batteries include: 1. Regularly checking the electrolyte level and adjusting its specific gravity; 2. Charging promptly when needed; 3. Cleaning battery terminals and applying grease for protection.
16
0
Share

Are Mercedes-Benz and BMW the same company?

Mercedes-Benz and BMW are not the same company. Taking the 2020 BMW X5 as an example, it belongs to the mid-to-large-size SUV category, with body dimensions of: length 4930mm, width 2004mm, height 1776mm, and a wheelbase of 2975mm. The fuel tank capacity is 83 liters. The 2020 BMW X5 features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 265 PS, a maximum power of 195 kW, and a maximum torque of 400 Nm. It is paired with an 8-speed automatic transmission.
20
3
Share

Does a car's exhaust pipe have a drainage hole?

Yes, a car's exhaust pipe has a drainage hole. Accumulated water in the exhaust pipe can easily oxidize the pipe and muffler, leading to corrosion. The functions of the exhaust pipe are: 1. Reducing environmental pollution: The exhaust pipe contains a purification device, with a three-way catalytic converter that effectively cleans harmful gases from the exhaust; 2. Ventilation and exhaust: The car's exhaust pipe operates in a cycle of intake, compression, power, and exhaust. Without an exhaust pipe, the car cannot function; 3. Noise reduction: The exhaust pipe is equipped with a muffler, which reduces the car's noise. The principle is to divert the airflow through multiple channels, where the split flows rub and collide with each other, gradually reducing the airflow speed and repeatedly cycling to lower noise.
15
5
Share

What is the tire replacement sequence?

Tire replacement sequence: 1. Remove the damaged tire; 2. Install the spare tire. The functions of tires include: 1. Supporting the entire weight of the vehicle, bearing the load of the car, and transmitting forces and moments in other directions; 2. Preventing severe vibrations and early damage to automotive components, adapting to the high-speed performance of the vehicle and reducing noise during driving, ensuring driving safety, handling stability, comfort, and energy efficiency; 3. Transmitting traction and braking torque, ensuring good adhesion between the wheels and the road surface to improve the vehicle's power, braking, and passability; working together with the car suspension to mitigate impacts during driving and dampen the resulting vibrations.
11
2
Share

What does OBD in a car mean?

OBD in a car refers to the On-Board Diagnostics system, and its functions are: 1. To locate and describe faults in specific parts or components for easier maintenance; 2. To alert about faults that cause excessive emissions, indicating increased environmental impact from pollutant emissions. OBD includes: 1. EGR; 2. Engine; 3. Particulate filter; 4. Catalytic converter; 5. Oxygen sensor; 6. Emission control system; 7. Fuel system. The working principle of OBD is: When an emission fault occurs, the ECU records the fault information and related codes, and notifies the driver through the malfunction indicator light or check engine light.
6
1
Share

How to reset Audi tire pressure fault code?

Audi tire pressure fault code reset method: 1. Adjust the tire pressure value according to the manufacturer's specified value; 2. Go to the vehicle's central control screen and swipe left; 3. Select the vehicle option; 4. Then click on settings and services; 5. Scroll down to find the tire pressure monitoring system option and click to enter; 6. After ensuring the tire pressure is at the standard value, click 'Store now'. The functions of tires include: 1. Supporting the entire weight of the vehicle, bearing the vehicle's load, and transmitting forces and moments in other directions; 2. Preventing severe vibrations and early damage to vehicle components, adapting to the vehicle's high-speed performance and reducing driving noise, ensuring driving safety, handling stability, comfort, and energy efficiency; 3. Transmitting traction and braking torque, ensuring good adhesion between the wheels and the road surface to improve the vehicle's power, braking, and passability; working with the vehicle suspension to mitigate impacts during driving and dampen resulting vibrations.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.