What should be noted for the first car maintenance?

What is the method for resetting the tire pressure on the Senova X35?

The method for resetting the tire pressure on the Senova X35 is to press and hold the button on the left side of the dashboard to enter the menu interface, release the button and press it again to select the tire initialization interface, then press the button on the right side to perform the initialization. Precautions for inflating car tires: Car's own tire pressure value range: There are various types of tires, and the tire pressure value for each car tire is different. Before inflating, it is essential to understand the car's own tire pressure value range. The tire pressure value range can be found in the car's manual or on the right door frame of the car. Of course, if the door has been repainted, this mark may no longer be present. Car tire pressure is divided into unloaded tire pressure and fully loaded tire pressure, generally measured in PSI. Measuring tire pressure: Car tires rarely lose air unless they are punctured by a nail, which poses a safety hazard. Therefore, before inflating, it is necessary to check the tire pressure and feel for any nails in the tire. If the tire pressure is between the unloaded tire pressure and the fully loaded tire pressure, there is no need to inflate. If it is below the unloaded tire pressure, inflation is required. If it is above the fully loaded tire pressure, some air should be released. Inflating tools: Car inflating tools include manual and electric options. Some electric air pumps come with a tire pressure gauge but require an electrical connection. A bicycle pump can also be used for inflation, though it is more tiring. With a manual pump, approximately 15 pumps increase the pressure by about 0.1 PSI, which can be figured out through practice. Manual inflation is more suitable for small top-ups and can be considered a form of exercise. Re-testing tire pressure: If the pump does not have a built-in tire pressure gauge, a separate tire pressure gauge is needed for measurement. If using an air pump, this step is unnecessary.

4

0

Share

What is a Commercial-to-Private Used Car?

Commercial-to-Private used car refers to a vehicle that has been converted from commercial operation to private use, meaning a formerly commercially operated vehicle is changed to a private car, altering its usage classification. Below is relevant information about used cars: Basic Introduction A used car refers to a motor vehicle registered with the public security traffic management authorities that can still be used before reaching the national scrapping standard or within its economically practical service life. Purchase Channels include used car markets, used car websites, brokerage firms, and 4S stores. The used car market offers everything from super luxury cars worth millions to discontinued models priced at just a few thousand yuan. Going directly to the used car market to find a buyer can eliminate middlemen and yield greater benefits. Most 4S stores rely on professional used car service providers for evaluation and transactions, and since 4S stores also charge a certain profit margin, they are suitable for owners purchasing new cars who seek impeccable service.

9

5

Share

What Lights to Use When Meeting Another Vehicle at Night?

Use low beam headlights when meeting another vehicle at night. Below is relevant information about automotive lighting: Basic Introduction Automotive lights are various traffic lights installed on vehicles to ensure safe driving, categorized into illumination lights and signal lights. Between 1905-1912, acetylene headlights with spotlight features were initially installed to illuminate the road ahead, accompanied by a kerosene lamp serving as the rear license plate light. By 1945-1947, the minimum required external lighting fixtures had been finalized. Qualified automotive lights must comply with corresponding photometric, colorimetric, and basic environmental testing standards. Development Trends Unconventional headlights that align with streamlined vehicle body designs will continue to evolve, with high-intensity discharge lamps potentially becoming the new generation of headlight sources. Research is ongoing to improve high-mounted brake lights and high-contrast combination rear lights.

13

4

Share

At what speed will the car stall when braking in 5th gear?

When braking in 5th gear, the car will stall at approximately 25 mph. There are three types of braking systems: 1. Foot brake - The most commonly used brake while driving, operated by foot, hence the name. When the driver presses the brake pedal, the braking force is transmitted mechanically or hydraulically to the wheel's braking device to create friction. 2. Parking brake - Also known as the handbrake, it prevents the vehicle from sliding when parked. There are generally two types: the intermediate brake type installed on the driveshaft and the direct control rear wheel brake type. 3. Anti-lock braking system (ABS) - When driving on slippery or icy low-friction roads, excessive braking can cause the wheels to lock up and lose traction, leading to a loss of directional control. To enable effective directional control in such hazardous conditions, the ABS (Anti-lock Braking System) was developed.

6

5

Share

Is the car owned by the person whose name is on the vehicle license?

The car belongs to the person whose name is on the vehicle license. Below is relevant information about the vehicle license: Composition The vehicle license consists of three parts: the license holder, the main page, and the supplementary page. The front of the main page contains the stamped core, while the back features a photo of the vehicle, sealed in plastic. The supplementary page also contains the stamped core. Function Possessing the 'Motor Vehicle License' is one of the prerequisites for a vehicle to be driven on the road. Driving without the license is a violation. The 'Owner's Name' field on the 'Motor Vehicle License' is not just about the name; the registered owner on the license is the legally recognized owner of the vehicle, with the right to legally use and dispose of the property. In case of traffic accidents or economic disputes, the registered owner is also the legally responsible party.

10

2

Share

What is EPC?

The EPC indicator light can illuminate in two scenarios: during the power-on self-test and under other circumstances. The power-on self-test is an indication that the vehicle is monitoring the status of all sensors before driving. Generally, if the vehicle is not started after power-on, the light will turn off by itself after about 3 seconds. If the EPC light remains on after the vehicle starts or illuminates under other conditions, the possible causes include faults in the engine intake system, throttle body, fuel system, engine, ECU control unit, or brake lights. Below is a detailed explanation of the reasons for the EPC light illuminating under other circumstances: Engine intake system fault: The EPC light will alert if the engine intake is obstructed or insufficient. Throttle body fault: Carbon buildup is a common issue with the throttle body. Additionally, dirt accumulation can affect intake, triggering the indicator light. Fuel system fault: This includes issues such as substandard fuel, fuel degradation, or poor fuel atomization. Engine fault: Insufficient engine pressure or problems with components like the intake valves can also cause the EPC light to illuminate. ECU control unit fault: This may involve interference with the vehicle's computer signals or false alarms from the computer. Brake light fault: Situations like non-functioning brake lights, faulty brake switches, or brake circuit issues can trigger the EPC light. Solutions for an illuminated EPC light: Troubleshoot the intake system, use fuel with the appropriate octane rating, clean the throttle body, etc. Remove carbon deposits from relevant components. Re-flash the ECU data. If the EPC light illuminates, the driver can first try turning off the engine and restarting it to see if the light remains on. If it does not, there may be no issue, and the light could have been affected temporarily. If the light stays on or frequently illuminates, the vehicle should be taken to the nearest service center for professional diagnosis and repair to eliminate potential safety hazards. The full English name of EPC is Electronic-Power-Control, which translates to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system primarily includes controllers and sensors related to the powertrain. When sensor data is abnormal, the EPC system will take predefined actions on the powertrain. The EPC indicator light typically appears in two colors: yellow and red. A yellow EPC fault light indicates that the vehicle can still be driven but should proceed slowly to a repair facility. A red EPC fault light signifies a more severe issue, and the driver should pull over immediately and contact a professional for repairs. Continuing to drive under such conditions may damage core components or compromise safety.

10

0

Share

What should be noted for the first car maintenance?

What is the method for resetting the tire pressure on the Senova X35?

What is a Commercial-to-Private Used Car?

What Lights to Use When Meeting Another Vehicle at Night?

At what speed will the car stall when braking in 5th gear?

Is the car owned by the person whose name is on the vehicle license?

What is EPC?

What is the collection standard for vehicle and vessel tax on imported cars?

Which country does AP Brakes belong to?

What is the battery model for the Accord?

What Causes Car Headlights to Stop Working?