What should be noted for the first car maintenance?

1 Answers
OConnor
07/29/25 3:12pm
Here are the precautions regarding the first car maintenance: 1. The first maintenance time of the car is calculated based on the pickup date. 2. There are two indicators for the first maintenance time: mileage and time. Whichever comes first, maintenance must be performed. Exceeding either will affect the warranty. It is worth mentioning that according to relevant regulations, if the first maintenance date is exceeded, it will be regarded as automatically waiving the rights of the first maintenance. If the first maintenance is not performed, future quality issues of the car will not be guaranteed. 3. The first maintenance time and maintenance cycle of the car are different. Some car maintenance cycles are only 2000 kilometers, while others are as long as 8000 kilometers. The engine and the new car have a break-in period. The first car maintenance includes the following: 1. Replace engine oil, oil filter, clean air filter, check whether the generator belt and wiper blades are damaged, check whether the levels of various fluids are normal, check whether the tire pressure is normal, and whether the tires have uneven wear, bulges, or damage. 2. Check the car chassis: including whether the brake pads, brake discs, connecting rods, ball joints, and CV joints are scratched. 3. Check all the switches and lights in the car to see if they are working properly.
Was this review help?
14
2
Share
More Forum Discussions

What Are the Causes and Solutions for Black Smoke from Cars?

Car black smoke causes and solutions are as follows: 1. Air filter clogging: The mixture becomes too rich, leading to insufficient oxygen supply and incomplete combustion. Solution: Clean the relevant parts to prevent clogging. 2. Poor fuel quality: When the owner uses low-quality gasoline, similar situations are likely to occur; adding different types of gasoline when there is still gasoline in the engine will also cause this situation. Solution: Do not use fuel oil arbitrarily, try to choose oil from big brands; the selection of fuel type is also very important, do not arbitrarily choose different types.
15
2
Share

How to Align the Bumper with the Line in Subject 2?

When going uphill, start by bringing the right tire of the car close to the right edge line without crossing it. Observe the right rearview mirror and adjust the steering wheel to align the driving direction parallel to the right edge line. Before reaching the stopping point, adjust the distance between the right side of the car and the right edge line. When the stopping point aligns with the frontmost part of the car, begin pressing the clutch, depress it fully, and slowly apply the brake until the car comes to a complete stop.
7
5
Share

How to Check Driver's License Online?

First, open your browser and enter the traffic management website of the province where your driver's license is registered in the search bar, then click search. Directly click on the website link from the search results to enter the site (make sure to select the official website). On the left side of the website, locate the driver's license violation inquiry window, then enter the relevant license information in the fields provided and click the search button to check your driver's license.
14
5
Share

What's the difference between with T and without T?

The main differences between with T and without T are as follows: 1. Power: Under the same displacement, the power of with T is stronger than without T, approximately 40% stronger. 2. Acceleration: The acceleration of with T is stronger than without T, but without T has smoother and more linear acceleration. 3. Fuel consumption: For long-distance driving, with T is more fuel-efficient because the turbocharger intervenes, making fuel combustion more complete; for city driving, without T is more fuel-efficient because the turbocharger cannot intervene in city driving. 4. Maintenance: The maintenance cost of with T is much higher than without T.
9
3
Share

How to Determine When to Replace Brake Discs

There are three main methods to determine whether brake discs need replacement: 1. Judge by the frequency of brake pad replacement: If brake pads are replaced frequently, it's necessary to check whether the brake discs are too thin. 2. Determine based on wear condition: If there are deep grooves caused by foreign object abrasion on the brake discs, or if the disc surface shows uneven wear (some areas are thin while others are thick), it's recommended to replace them. This type of uneven wear can directly affect the driver's safety. 3. Abnormal noises during braking: The brake discs should be inspected. If the noise is caused by damage or scratches on the brake discs, they should be replaced promptly.
10
2
Share

Where to Install Car Bumper Guards?

Car bumper guards are installed at the corners of doors and front/rear bumpers. There are three types of bumper guards: body bumper guards, door bumper guards, and rearview mirror bumper guards. Installing bumper guards can enhance the vehicle's lines and dynamic appearance, serving a decorative purpose. They also protect the car body from scratches or impacts caused by external objects, providing protective functionality. The installation methods for bumper guards include: 1. Embedded type - the vehicle body has pre-formed grooves during manufacturing where the guards are inserted; 2. Flat type - the vehicle body has a flat surface with pre-drilled holes where the guard's protruding posts are inserted and adhered; 3. Fixed type - the guards are secured to the vehicle body using nuts and bolts.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.