What should be noted during the probationary period of a driver's license?

2 Answers
McPeyton
07/25/25 1:46am
Precautions during the probationary period of a driver's license are as follows: 1. The first year after obtaining a driver's license is the probationary period. During this period, drivers are not allowed to drive alone on highways and must be accompanied by someone who has held the same or a higher-level driver's license for more than three years. 2. Within one year of obtaining a driver's license, it is the probationary period. Drivers must be accompanied by someone who has held the relevant or higher-level driving permit for more than three years when driving on highways during the probationary period. Only after the probationary period ends can they drive alone on highways. 3. If a driver drives alone on highways before the probationary period ends, they will be fined. This regulation helps reduce traffic accidents on highways, as drivers unfamiliar with road conditions during the probationary period are more prone to accidents.
Was this review help?
19
1
Share
McHadley
08/10/25 4:17pm
For novice drivers during their probationary period, safety is absolutely paramount. As a seasoned driver with decades of experience, I recommend that beginners first display a probationary sign to alert others, which can reduce the risk of rear-end collisions. During the first year of the probationary period, they are not allowed to drive alone on highways and must have an experienced coach accompany them. Maintain a sufficient following distance—at least two seconds in urban areas and even longer in suburban areas, due to shorter reaction times. Keep the speed moderate, within the speed limit, especially during rain or poor visibility at night. Stay relaxed, practice more to familiarize yourself with road conditions, such as driving half an hour daily on different routes to accumulate experience. By the end, it's best to master parking and navigating tight turns, and develop the habit of checking blind spots before changing lanes. Serious violations during the probationary period may lead to an extension, so behaviors like drunk driving or distracted phone use must be avoided. Steadily passing this year will build confidence for future driving.
Was this review help?
1
5
Share
Expand All
More Forum Discussions

What are the three driving modes of the Roewe ei5?

The three driving modes of the Roewe ei5 are Economy, Standard, and Sport. Below are detailed explanations of each mode:1. Economy Mode: Designed to reduce power consumption, the Economy Mode significantly reduces power output in the early to mid-range of the accelerator pedal. The driving experience feels sluggish, with minimal acceleration even when pressing the pedal to the mid-range. However, acceleration becomes more responsive in the later stage.2. Standard Mode: The Standard Mode offers more responsive acceleration than the Economy Mode, but remains smooth and unhurried. Even when pressing the accelerator pedal to the mid-range from a standstill, the energy consumption gauge needle does not immediately jump to a higher position but rises at a steady pace.3. Sport Mode: The Sport Mode provides a slightly more aggressive acceleration feel. Even with slight pressure on the accelerator pedal in the early stage, the energy consumption gauge needle actively swings upward, accompanied by noticeable acceleration. This effect is most pronounced during low-speed driving or when stationary.
13
0
Share

How to Switch Between Internal and External Air Circulation

The method to switch between internal and external air circulation is as follows: 1. After the vehicle has been exposed to the sun, first turn on the external circulation to ventilate and dissipate heat when getting in the car. You can also open the windows and sunroof to speed up the heat dissipation. After 3 to 5 minutes, when the interior temperature has balanced, close the windows, turn on the air conditioning, and switch the air circulation to internal. 2. In cold weather, wait a moment after getting in the car until the engine temperature reaches the normal level. Then, turning on the heater with internal circulation can quickly raise the temperature. 3. During traffic jams, turn off the external circulation to block exhaust fumes from the vehicle in front. 4. When driving at high speeds, you can turn on the external circulation as needed. Prolonged use of internal circulation at high speeds can lead to stale air inside the car. Switching to external circulation helps maintain the interior temperature and provides fresh air. 5. When parked and using the air conditioning while resting in the car, periodically switch to external circulation or leave a small gap in the window.
4
5
Share

How Long Should a Car Warm Up?

Car warm-up time only needs 30 seconds after starting. 1. The correct warm-up method: The correct way to warm up your car is to drive off after 30 seconds to one minute of idling. However, avoid driving at high RPMs during this time; maintain a low speed with engine RPM not exceeding 3000~3500, ideally keeping it around 2000 RPM. 2. Why use the correct warm-up method: After prolonged parking, the engine oil flows back into the oil pan at the bottom of the engine. Therefore, when starting the engine after a long period of inactivity (such as overnight), the upper part of the engine is initially without oil and lacks lubrication. It takes about 60 seconds after starting for the oil pump to circulate oil to the engine's most critical lubrication points, such as the pistons, connecting rods, and crankshaft. However, even if you start driving immediately after starting the engine, as long as you avoid aggressive acceleration and maintain low-speed operation, the effect is the same as idling.
10
4
Share

How to Initialize the Windows of a Peugeot 307?

The method to initialize the windows of a Peugeot 307 is as follows: Use the window lift switch in the door. First, manually lower the window to the bottom, then continuously hold the window up button to raise the window from the bottom to the top. Be careful not to release the button. After the window reaches the top, keep holding the up button for about 5 seconds before releasing it, then pull the button up once more. Taking the 2013 Peugeot 307 as an example, its body structure is a 5-door, 5-seat hatchback with dimensions of 4249mm in length, 1786mm in width, and 1556mm in height. It has a wheelbase of 2608mm, a fuel tank capacity of 60 liters, a trunk capacity of 433 liters, and a curb weight of 1280kg.
5
5
Share

How many kilometers can a full tank of gas last for the Haval F7 in urban areas?

Haval F7 can travel 500 kilometers on a full tank of gas. Here is the relevant information: 1. The Haval F7 is a compact SUV under the Haval brand, with a wheelbase of 2725 mm, and dimensions of 4620 mm in length, 1846 mm in width, and 1690 mm in height. The Haval F7 is equipped with two engines: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. 2. The 1.5-liter turbocharged engine delivers 169 horsepower and a maximum torque of 285 Nm, with a maximum power output at 5000 to 5600 rpm and a maximum torque range of 1400 to 3000 rpm. This engine features CVVL technology and direct fuel injection, and it uses an aluminum alloy cylinder head and block.
1
3
Share

What causes the rear axle oil of Shantui 160 to mix into the transmission?

Shantui 160 rear axle oil mixing into the transmission is due to oil seal leakage. Here are the relevant details: 1. Applicable conditions: There is no difference between rear axle oil and manual transmission oil. Automatic transmissions require higher-grade oil, also known as gearbox oil or transmission fluid. Ordinary rear axle oil cannot be used in automatic transmissions, which is the difference between automatic transmission oil and rear axle oil in transmission fluids. 2. Properties: Gear oil mainly refers to the lubricating oil for transmissions and rear axles. It differs from engine oil in terms of usage conditions, composition, and performance. 3. Function: Automotive gear oil is used in gear transmission mechanisms such as steering gear, transmission, and drive axle. Due to the high surface pressure during gear transmission, gear oil functions to lubricate gears, provide anti-wear protection, cool and dissipate heat, prevent corrosion and rust, clean, and reduce gear surface impact and noise.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.