···
Log in / Register

What Should Be Done for Long-Term Vehicle Storage?

1 Answers
SanElliott
08/29/25 6:29am

Here are the handling methods for long-term vehicle parking: 1. Adjust tire pressure to the upper limit, fill the fuel tank, and turn off all vehicle circuits; 2. Drain all antifreeze from the cooling system, drain the engine oil, disconnect the battery terminals after fully charging, and recharge periodically during storage; 3. Use a reliable jack to lift the vehicle, relieving pressure on the tires and suspension components. Below are the potential hazards of long-term vehicle parking: 1. Impact on tires: The vehicle's weight is borne by four tires. During long-term parking, the parts of the tires in contact with the ground will gradually deform under gravity. The longer the parking duration, the harder it is for the deformed parts to recover. If the vehicle is driven in this condition, the rolling radius of the deformed tires will become uneven, leading to tire imbalance and reduced grip. 2. Impact on electronic components: All electronic components in a vehicle require protection against water, moisture, and corrosion; otherwise, malfunctions may occur. During long-term parking, electronic components or wiring connectors are prone to moisture damage. If a strong musty smell is detected upon entering the vehicle, it is best not to power it on directly, as this could cause a short circuit. The longer the parking duration, the higher the probability of malfunctions. 3. Impact on the battery: Under normal conditions, a battery loses more than 1% of its charge every 24 hours. Parking for over three months can completely deplete the battery. When the battery charge is low, damage to the battery accelerates, reducing its capacity and lifespan, ultimately leading to premature battery failure. 4. Impact on engine oil: Generally, engine oil has a shelf life of one year. Parking accelerates the oxidation and deterioration of the oil. After oxidation, its lubricating effectiveness diminishes, and acidic substances can corrode engine components. The longer the parking duration, the more severe the deterioration.

Was this review help?
15
0
Share
More Forum Discussions

What engine does the Polo use?

Polo uses a 1.5-liter naturally aspirated engine with a maximum power of 83kw and a maximum torque of 145nm. The maximum power speed is 6000 revolutions per minute, and the maximum torque speed is 3900 revolutions per minute. This engine is matched with a 5-speed manual transmission or a 6AT transmission. Polo is a small car with a body size of 3970 mm in length, 1682 mm in width, and 1462 mm in height. In terms of suspension, the Polo rear suspension adopts a torsion beam non-independent suspension. The torsion beam non-independent suspension is a type of car rear suspension, and the structure of this non-independent suspension is relatively simple.
2
3
Share

Where is the VIN number located on the Haima S5?

Haima S5's VIN number is located under the windshield on the front passenger side, visible when the passenger door is opened. The VIN, short for Vehicle Identification Number, is a 17-character alphanumeric code assigned by the manufacturer to uniquely identify the vehicle. The Haima S5 is an SUV with body dimensions of 4358mm in length, 1823mm in width, and 1630mm in height, and a wheelbase of 2630mm. In terms of power, the Haima S5 is equipped with a 1.6-liter all-aluminum engine, delivering a maximum power of 90kW and a maximum torque of 160Nm.
6
3
Share

What is the function of the car's A button?

Car's A button is the auto-hold function, which refers to an automatic braking feature that simplifies operation by avoiding the use of handbrake or electronic handbrake. The principle of auto-hold is that the car's ECU automatically measures wheel torque and vehicle level data to determine whether the vehicle has a tendency to roll. If there is a tendency to roll, the ECU will apply appropriate braking force to the wheels to keep the vehicle stationary. When starting, pressing the accelerator will automatically turn off the auto-hold, allowing the vehicle to move. The car's A button is a status button; when lit, it indicates that the auto-hold is activated, and when not lit, it means the auto-hold is turned off.
19
0
Share

Is a Fuel Consumption of 17 L/100km Normal for a New Car?

New car fuel consumption of 17 L/100km is abnormal. Here are relevant precautions for new car usage: 1. Avoid overloading: Carrying excessive weight during the break-in period can damage mechanical components. As various power transmission parts haven't fully worn in yet, aggressive acceleration may cause irreversible damage. Therefore, new vehicles must adhere to the "slow and steady" principle during break-in. 2. Speed limits for new cars: Domestic vehicles generally 40 70 km/h, imported vehicles typically 100 km/h. When fully accelerating, speed should not exceed 80% of maximum velocity. The prescribed engine RPM during break-in is 2000 4000 rpm.
12
5
Share

What brand is the Lynk & Co engine?

Lynk & Co engines are from Volvo, equipped with a 2.0T engine that delivers a maximum power of 243kW, paired with an Aisin 8AT transmission. Lynk & Co is a compact SUV with body dimensions of 4512mm in length, 1857mm in width, and 1650mm in height, and a wheelbase of 2734mm. In terms of suspension, the front suspension of the Lynk & Co uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension. Both MacPherson and multi-link suspensions are common independent suspensions in vehicles. The suspension is used to connect the body and the wheels; without it, the car would not be able to drive normally.
7
2
Share

What are the reasons for oil leakage in the Skoda Fabia engine?

The reasons for oil leakage in the Skoda Fabia engine are: 1. Damage to the oil pan gasket or loose screws; 2. Improper assembly of the timing gear cover gasket; 3. Deformation of the engine support plate or poor sealing of the gasket. Solutions for oil leakage in the Skoda Fabia engine: 1. Tighten or replace the oil drain screw; 2. Replace the engine oil filter with a new one. The Skoda Fabia is a compact car with body dimensions of 4003mm in length, 1642mm in width, and 1500mm in height, with a wheelbase of 2465mm. In terms of suspension, the Skoda Fabia uses a MacPherson strut front suspension and a torsion beam rear suspension.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.