···
Log in / Register

What should be done after a vehicle catches fire?

4 Answers
Adriel
08/31/25 4:04am

Solutions after a vehicle catches fire are as follows: 1. When a car fire occurs, the driver should immediately cut off the fuel supply, turn off the ignition switch, and remove flammable items from the car, such as lighters. Then quickly take out the fire extinguisher, pull out the safety pin, and press the handle towards the fire source to extinguish the flames. If the fire is too fierce to be put out, quickly find a way to leave. 2. When the car is on fire and the driver's door cannot be opened, escape through the windshield. When flames are approaching and cannot be avoided, use your body to press down on the flames to reduce or extinguish them. 3. When escaping the fire, protect exposed skin and avoid breathing through the mouth or shouting loudly to prevent burns to the upper respiratory tract from smoke and flames. 4. If wearing clothes made of synthetic fabrics, stay away from the fire source as synthetic fabrics are flammable. If clothes catch fire, remove them as soon as possible to avoid skin burns. 5. If the vehicle's fuel is on fire, do not try to extinguish it by patting or using water. Only use sand, quilts, tarps, etc., to cover and cut off the air supply to smother the flames. 6. If the parking lot is on fire or there are other vehicles near the burning car, quickly evacuate the other vehicles or move the burning vehicle away before attempting to extinguish the fire.

Was this review help?
10
5
Share
ArabellaRose
09/12/25 7:24am

When a vehicle catches fire, the top priority is ensuring everyone's safety. As a driver with years of experience, I understand the importance of staying calm in emergencies. The first step is to immediately pull over to a safe roadside and turn off the engine to reduce fuel supply. Then, all passengers should quickly exit the vehicle and move to a safe area at least 10 meters away, avoiding any potential explosion risks. Don't worry about belongings in the car—human lives are far more valuable than the vehicle. Immediately call 911 or the fire department hotline, clearly describing your location and the fire situation. If the fire is small, such as smoke coming from the hood gap, and you have a car fire extinguisher, you can stand upwind and aim at the base of the flames to spray a few times. But remember, never open the hood or trunk, as oxygen can instantly intensify the fire. I always regularly inspect the car's electrical and fuel systems to prevent fires caused by aging, and I recommend keeping a small fire extinguisher in the trunk and maintaining it periodically. Finally, wait quietly for professional rescue and do not approach the burning vehicle on your own.

Was this review help?
6
3
Share
Expand All
VanMolly
10/26/25 8:13am

As a mom driver, my biggest worry when taking my kids out is sudden emergencies. If the vehicle catches fire unexpectedly, immediate action is crucial: safely pull over, turn off all power sources, and ensure kids and other passengers evacuate the car swiftly to an open area at least 15 meters away. Never delay—flames can spread within seconds. Call 119 immediately to report details, ensuring firefighters arrive promptly. If the fire is small initially, carefully use the car's fire extinguisher while standing at a safe distance. Educating family on vehicle safety is vital—we inspect the car battery and engine weekly for unusual smells or corrosion, as prevention is key. In case of fire, prioritize evacuation over attempting to rescue belongings. Waiting for professionals to handle the situation is the wisest choice.

Was this review help?
18
5
Share
Expand All
StBrielle
12/09/25 8:34am

Vehicle fires are extremely dangerous. As a young car owner, I experienced one before. Immediately pull over, turn off the engine, and evacuate all passengers to a safe distance. Call emergency services right away and clearly report your location. If the fire is small, use a fire extinguisher to spray at the base of the flames, but stay away from the front of the car to avoid explosion injuries. Regularly inspect electrical circuits and avoid modifications or overloading that could cause fires.

Was this review help?
19
3
Share
Expand All
More Forum Discussions

How to adjust the dashboard brightness of Mercedes-Benz V260?

After entering the menu page, press the up and down buttons to select the lighting submenu; press OK to confirm after selecting the submenu. After confirmation, press the up and down buttons again to select the brightness display switch function, and you will see the relevant settings. After entering the relevant settings, press OK again to confirm. After confirmation, press the up and down buttons to select an appropriate brightness level between Brightness 1 and Brightness 5. After selecting the appropriate brightness, press OK to save the settings.
16
4
Share

What are the reasons for the sudden silence of the entire audio system in the Haval H6?

Here are the reasons why the entire audio system in the Haval H6 suddenly stops working: 1. System lag: If the car audio has no sound but otherwise functions normally, it is usually not a mechanical failure but rather due to system lag. In this case, try restarting the car to restore the system. After the system recovers, the audio should generally resume working. 2. Bluetooth connection failure: If the car audio is connected via Bluetooth from a mobile phone, try disconnecting and reconnecting the Bluetooth. An incoming call can interrupt the signal input, and after the call ends, Bluetooth lag or failure may cause the audio to have no sound. Users who have used Bluetooth headphones have likely encountered this issue. Simply reconnect to resolve it. 3. Wiring issues: If none of the above problems occur, check if the CD power supply is faulty. If the power indicator is lit and the CD can be turned off normally, then the issue is not with the power supply. If everything seems fine, inspect whether the power cables have aged or if the fuse has come loose. Otherwise, it is best to take the car to a repair shop for further inspection and maintenance.
14
1
Share

How to Clean a Dirty Mercedes Radar Sensor?

When the driver sees this warning, simply wipe all the probes with a tissue or towel. It could be mud, water, or plastic stuck to the probe, and cleaning it will solve the issue. The vehicle's radar sensors should be cleaned promptly. Dirt on the probe can cause detection abnormalities or even incorrect signal readings, which may affect the driver's judgment and lead to accidents. If the measurement involves a multi-dimensional vector, the sensor's cross-sensitivity should be as minimal as possible.
10
1
Share

How to Install Motorcycle Sequential Turn Signals?

First, locate a suitable place to fix the turn signals. If there isn't one, you'll need to drill holes yourself. After drilling and fixing, thread the wires through the drilled holes. Connect yellow to yellow, pink to pink, green to green-white. The red wire connects to the battery's positive line, and the black wire is the voltage regulator line. After connecting, use a multimeter to measure the voltage by testing the battery's positive and negative terminals. Use a 12V 20A0 battery to replace the original motorcycle battery. This can extend the battery's working time and prolong the usage of the motorcycle's electrical equipment, lighting, and electric start system.
12
1
Share

How to Change BMW Key Language from English to Chinese?

Adjust through the car's multifunction steering wheel. First, locate the multifunction steering wheel, the key with an LCD display, and various auxiliary functions. Click the SET button on the left side of the steering wheel. Press the OK button on the multifunction steering wheel for five seconds. The language settings option will appear on the display screen. Select the Mandarin Chinese option, and you will notice the display no longer shows English. The vehicle information display function allows you to check the vehicle's status, doors, remaining fuel mileage, and unauthorized door opening alerts on the key's display screen at any time.
14
4
Share

What are the steps for disassembling and assembling a Jetta engine?

Remove the fuel pump fuse, start the engine to release fuel pressure, and disconnect the negative battery cable. Disassemble the intake pipe assembly, remove the upper intake manifold assembly, and take off the lower intake manifold assembly to prevent debris from entering the passages. Remove the heated oxygen sensor, detach the exhaust pipe and gasket from the mounting bracket, and clean the exhaust manifold sealing surface to check for holes, damage, or cracks. Remove the protective plate to expose the generator belt, take off the belt, remove the engine crankshaft output pulley, and detach the triangular fixed bracket on the engine side. Loosen the cylinder head cover bolts in a diagonal sequence, remove the cylinder head cover, take off the valve cover gasket (ensuring its integrity), and then remove the cylinder head.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.