What Should Be Considered When Modifying Car Audio?

1 Answers
MacAdalynn
07/25/25 1:34am
When modifying car audio, attention should be paid to whether the products are qualified, the sound quality effect, and after-sales service, etc. Price Consideration: Do not blindly pursue the more expensive the better. Accessories should be selected based on the actual condition of the vehicle itself. Function Selection: Do not blindly pursue more audio functions. The main unit of the audio system is the core that determines the quality of sound effects, while speakers, crossovers, amplifiers, and speaker boxes are important conditions for good sound effects. Other auxiliary facilities do not help much in improving the actual sound effects. Sound Insulation Selection: Do not overly emphasize sound insulation effects. If the driver cannot hear sounds from the road and the power system, it will be impossible to obtain relevant information about road conditions and vehicle conditions, affecting driving safety. Visual Effects: Do not blindly pursue visual effects, such as installing large-diameter exhaust pipes or spoilers just for the sake of appearance.
Was this review help?
2
3
Share
More Forum Discussions

What is the typical lifespan of a car in years or mileage?

According to current laws and regulations, vehicles in China will be guided for scrapping when the mileage reaches 600,000 kilometers. Apart from mileage, the guided elimination time for older vehicles is approximately 15 years. Below are specific details on vehicle maintenance: 1. Paint maintenance: Regular waxing and protecting the clear coat layer, along with rust prevention treatment after scratches to ensure continuous care; as long as the paint remains intact, the internal panels will not rust. 2. Chassis maintenance: Although the vehicle's all-metal cast chassis is originally treated for rust prevention, it is not comprehensive. To extend the service life, consider applying a secondary coating. 3. Interior maintenance: Whether it's leather seats or fabric seats, long-term frequent use will inevitably cause wear, and the foam padding may sag; strictly speaking, seats are actually consumable parts. If problems arise, repairs can be made, and the cost is relatively low.
17
3
Share

How to Adjust a Car Pulling to the Left?

Methods to adjust a car pulling to the left: 1. Turn the steering wheel fully to the right to expose the rear of the left front wheel; 2. Loosen the fastening nut with a wrench, then rotate the left tie rod clockwise (clockwise refers to the position of the tie rod relative to the tie rod base); 3. Turn the steering wheel fully to the left and repeat the previous steps. Causes of vehicle pulling include: 1. Unequal tire pressure, mainly due to inconsistent tire pressure in the drive wheels. Unequal tire pressure on both sides will change the friction between the tires and the ground, so maintaining equal tire pressure is the most basic requirement to ensure the car does not pull; 2. Different tread patterns or uneven tread depths on the tires; 3. The condition of the steering system will also affect the car's straight-line driving. Worn components or loose bearings, kingpins, and bushings can cause the car to wobble and fail to maintain a normal trajectory; 4. Failed front shock absorbers.
11
2
Share

Where is the cigarette lighter in the Roewe RX5 Plus?

The cigarette lighter in the Roewe RX5 Plus is located under the left dashboard cover. Here are the specific details about the car cigarette lighter: 1. Heating: The voltage of the car cigarette lighter is usually 12V, 24V, or 48V, with 12V being the most common. The central elastic head of the lighter is the positive pole, while the side clips are the negative poles. The car cigarette lighter requires about 10 seconds to heat up, and it will not pop out until the heating process is complete. 2. Function: The car cigarette lighter is similar to a multi-socket power source for household use, designed to allow car owners to smoke. 3. Aging: If the cigarette lighter is frequently inserted or removed, it can accelerate aging and reduce its lifespan.
18
1
Share

What Causes a Car to Shake After Starting?

The reasons for a car shaking after starting are: 1. Severe carbon deposits in the engine cylinders, which can cause spark plug blockage and valve blockage; 2. Unstable oil pressure, which easily leads to unstable concentration of the air-fuel mixture; 3. Aging engine mounts; 4. Issues with the ignition coil or the spark plugs failing to fire for some reason. If the car shakes when first started but stops shaking after the engine warms up, this could be due to the lubrication system not fully lubricating during a cold start, causing rough operation, or the engine not yet reaching the appropriate operating temperature, resulting in incomplete fuel combustion and knocking. If the car shakes upon starting, it is recommended that the owner promptly take it to a 4S shop for inspection and repair. Do not take it lightly; it is important to identify the source of the shaking promptly, as it could otherwise lead to more significant issues.
17
0
Share

How to distinguish between dry and wet Volkswagen dual-clutch transmissions?

To distinguish between dry and wet Volkswagen dual-clutch transmissions, you can check the car's rear emblem. If the rear of the Volkswagen car is labeled with 230 or 280, it uses a dry dual-clutch transmission; if it is labeled with 330 or 380, it uses a wet dual-clutch transmission. The clutch plates in a dry dual-clutch transmission are not immersed in transmission oil, whereas those in a wet dual-clutch transmission are immersed in transmission oil. Taking the Volkswagen Magotan as an example, the car has a length, width, and height of 4866mm, 1832mm, and 1464mm respectively, with a wheelbase of 2812mm. The extensive use of chrome accents and dual horizontal lines on the front face exudes a noble and distinguished kingly temperament.
19
0
Share

How to Reverse Park a Car?

The method for reverse parking is: 1. Park your car in front of the second parking space next to the target spot, aligning your left rearview mirror with the center of the second parking space while maintaining a distance of approximately 1.5 meters; 2. Turn the steering wheel fully to the right, shift into reverse gear, and let the car slowly back up; 3. When the car body is basically parallel with the parking space, straighten the steering wheel and reverse into the space. Precautions for reverse parking include: 1. Before reversing, check the situation behind the car, plan the reversing route, and ensure the front of the car won't hit any obstacles during the process; 2. Try to choose to reverse from the left side; 3. Point the front of the car towards an open area with room for maneuvering to better observe moving people or vehicles; 4. Gently press the accelerator to control the speed; 5. Ensure the safety behind the car and pay attention to the distance between obstacles and the car body.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.